This standard specifies the classification and naming, requirements, test methods, inspection rules and marking, packaging, transportation and storage of staplers. This standard applies to staplers used in conjunction with staplers. QB/T 1151-2005 Staples QB/T1151-2005 Standard download decompression password: www.bzxz.net

ICS 97.150
Classification number, Y54
Reference number: 157032005
Light Industry Standard of the People's Republic of China
QB/T1151—2005
Q/51-19
Staples
2005-03-19 Issued
National Development and Reform Commission of the People's Republic of China 2005-09-01 Implementation
This standard is based on the revision of Q/1151199]6:[8. This standard is based on the revision of Q/51-199]6:[8. The following differences are made: Under the premise of small shadow and use period, the product size is modified: The requirements of the government for the introduction of raw materials
This standard is proposed by China Light Industry Federation. This standard is under the jurisdiction of the National Sports Products Standardization Center QR/T1151-2005
This standard is initiated by Erhai Xin Sports Products Co., Ltd., Ruiteyuan Chemical Products (Erhai) Co., Ltd., Shanghai Aolin Yuejiao Chemical Products Co., Ltd., Shanghai Chang Sports Products Sales Co., Ltd., Jiangcheng Yilong Chemical Products Co., Ltd., Jinbanzhou Yue Co., Ltd., Wuyi Changchuan Yijiao Health Products Co., Ltd., and Wuyi County Boyang Cultural Products Co., Ltd. The main drafters of this standard are Zhang Zheng and Xu Guojian. This standard was first published on 16th: This standard is selected as the first revision. From the date of implementation, the light industry standard T1151-1 issued by the Ministry of Industry and Information Technology will be stapled? Scope
Staples
081151-2005
This standard specifies the classification, naming, requirements, test methods, specifications and marking methods of staplers. It is applicable to the packaging, transportation, storage and marking of staplers. 2 Normative referenced documents
The following documents shall become the standard through the introduction of this standard, and the latest edition shall not apply to the following machines (excluding the ones mentioned above): however, the latest edition of this document shall not apply to the following machines, however, the latest edition of this document shall not apply to the following machines, and the latest edition of this document shall not apply to the following machines, Standard, GBT191-2000 Storage and Transportation Diagram
GB/2828.1-003 Counting unique and dangerous No. 1: Purchase quantity A0 Ge Suo Jian inspection oil memory National point monitoring kidney pull clinical bureau monitoring difference [1 state] 172 and product identification mark frequency 3 classification and naming
3.1 Product appearance
No picture! :
Central A part bZxz.net
3.2 Product appearance size
Table 1,
Pointed A part
QB/11151·2005
Specification number
Base size
Super blue
±0 01
3.3 Special requirements for the product supply and demand sides in the three notes: 4 requirements
4.1 Order and level group: no damage.
2.2 Heat (Figure 1 should not be out of the specification Figure 2 A, 1 British trap limit economic difference
medical difference
H!l'stai
4.3 Slope (type with) over the cost of one of the 4.4 Figure 2 B, C, I defects each not to 4.5 Adhesion fastness
The image of business under the sincere experience, will be under the person more than 2 skills.
4. Daily outdoor sleep volume
There is no fall-off, rust and wood integrity. No false can obviously I pump up the meeting 4.? Ting paper performance
The new demand for the meeting 51m makes the demand for the bubble table 2
4.8 Comfortable outdoor room
Outdoor height six should meet the requirements of Table 1:
4. 9 according to the number of
according to the number of
5 test method
5.1 the outer width
the outer width is measured by the standard ruler: 12 divisions of inflammation, flat net, U style are flat feet, QB/T1151-2305
5.2 the nail feet are neat
the feet are checked, at the same time, the nail strips are placed on the grooves and concave changes to prevent the occurrence of cattle If the force of the device can be moved along the material, it is qualified. Test: The test shall be as follows: 3. ...
Inspection Rules
6.1 Products shall be inspected batch by batch. 6.2 This test adopts the piece method, the sample unit is small, E.3 pass the tower test connected with GB/T2828.1-2U03 special test level S-3 of the routine inspection case of supplement 1, 6.4 batch inspection items and requirements, test methods and AQL connected with the specifications of Table 4 6.5 to carry out special inspection S3 for each sample unit for re-sampling, according to the AQL of clothing 4 the main comfort of the year and season. QA/T 1512005 will be the same as the paper performance store B, : ^3: quality inspection effect of labeling, packaging, transportation, cross storage Table 4
7.1 Marking
The packaging must have the manufacturer's name, trademark, product name, article number, specification, quantity, positive or negative, net or positive, volume, length of the packaging, export certificate or batch number and other marks, as well as the words "Caution" and "Precautions", and must comply with product identification and labeling regulations. G191-20
1.2 Packaging
The packaging structure: 20 pieces of each type and model, no more than 2 pieces, 10 pieces in total, boxed, 50 pieces per box, special requirements The packaging loss shall be calculated by both parties in the contract, and the contents of the box shall also have quality inspection certificates (domestic sales, the packaging must be complete, free of explosion, sterilization, semi-solidity, etc. 7.3 Transportation
Products should avoid shock, moisture, and rain during transportation. They should be gently moved during transportation and should not be in contact with the market. 7.4 Storage
Products should be placed in a dry and ventilated warehouse: Place them on a wooden table at least 300mm away from the surface and more than 100mm away from the surface to prevent traceability. There should be no drastic temperature changes in the warehouse. As for the air corrosion, the effective conditions are met. The shelf life is two years from the date of leaving the factory.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.