This standard was first issued in 2000, and this is the first revision. This standard refers to the "GS1 General Specification" (Eighth Edition) formulated by the International Article Numbering Association (GS1), and in combination with my country's actual situation, GB/T18283-2000 "In-store Barcode" has been revised. This standard specifies the encoding, barcode representation, symbol quality evaluation and placement of barcode symbols for in-store barcodes. This standard is applicable to the barcode identification of goods sold in stores and variable retail goods processed by stores themselves. This standard replaces GB/T18283-2000. Compared with GB/T18283-2000, this standard has the following major changes: --- The name of the standard is changed to "Commodity Barcode In-store Barcode". - The scope of the original standard is changed from "This standard specifies the encoding, symbol representation and technical requirements of in-store barcodes. This standard applies to the barcode identification of variable consumption units of goods in the closed-loop system of stores." to "This standard specifies the encoding, barcode representation, symbol quality evaluation and placement of barcode symbols of in-store barcodes. This standard applies to the barcode identification of goods sold in stores and variable retail goods processed by stores themselves." - Only the number and name of the standard cited in this standard are given, and the original reference standard GB/T16830-1997 "Storage and Transportation Unit Barcode" is changed to GB/T14257 "Commodity Barcode Symbol Position". - The definition of the original standard in-store barcode is changed from "barcodes that identify variable consumption units of goods in store closed-loop systems" to "commodity barcodes with prefix codes of 20 to 24, used to identify goods sold in stores and variable retail goods processed by stores themselves". - Added the definition of variable retail goods. ———In terms of the code structure of the in-store barcode, 13-digit codes and 8-digit codes that do not contain information such as price have been added; the code structure of the original variable consumption unit has been adjusted and renamed as "13-digit code containing information such as price", the concept of "commodity item code" has been deleted, and the "price (measurement value) code" has been changed to "price or measurement value code", and the "price (measurement value) verification code" has been changed to "price or measurement value verification code". ———The evaluation of the quality of in-store barcode symbols has been added. ———The placement of in-store barcode symbols has been added. ———The calculation method of the price (measurement value) verification code in Appendix A has been retained and renamed as "Calculation method of the price or measurement value verification code", and the "price (measurement value) verification code" in the appendix has been changed to "price or measurement value verification code" accordingly. GB/T 18283-2008 Product Barcode In-store Barcode GB/T18283-2008 Standard download decompression password: www.bzxz.net
This standard specifies the encoding, barcode representation, symbol quality evaluation and placement of barcode symbols for in-store barcodes.
This standard applies to the barcode identification of goods sold in stores and variable retail goods processed by stores themselves. || tt|| This standard refers to the "GS1 General Specification" (Eighth Edition) formulated by the International Article Numbering Association (GS1), and in combination with China's actual situation, GB/T18283-2000 "In-store Barcode" has been revised.
This standard replaces GB/T18283-2000.
Compared with GB/T18283-2000, the main changes of this standard are as follows:
--- The name of the standard is changed to "Product Barcode In-store Barcode".
---Change the scope of the original standard from this standard specifies the encoding, symbol representation and technical requirements of in-store barcodes. This standard applies to the barcode identification of variable consumption units of goods in the closed-loop system of stores. This standard specifies the encoding, barcode representation, symbol quality evaluation and placement of barcode symbols of in-store barcodes. This standard applies to the barcode identification of goods sold in stores by themselves and variable retail goods.
---Only the numbers and names of the standards referenced by this standard are given, and the original referenced standard GB/T16830-1997 "Storage and Transportation Unit Barcode" is changed to GB/T14257 "Commodity Barcode Symbol Position".
--- Change the definition of the original standard in-store barcode from the barcode that identifies the variable consumption unit of goods in the closed-loop system of the store to the commodity barcode with a prefix code of 20~24, which is used to identify the goods sold in the store by themselves and variable retail goods.
---Added the definition of variable retail goods.
---In terms of the code structure of the in-store barcode, 13-digit codes and 8-digit codes that do not contain information such as price are added; the code structure of the original variable consumption unit is adjusted and renamed as a 13-digit code containing information such as price, the concept of commodity item code is deleted, the price (measurement value) code is changed to a price or measurement value code, and the price (measurement value) check code is changed to a price or measurement value check code.
---The evaluation of the quality of in-store barcode symbols is added.
---The placement of in-store barcode symbols is added.
---The calculation method of the price (measurement value) check code in Appendix A is retained and renamed as the calculation method of the price or measurement value check code, and the price (measurement value) check code in the appendix is changed to the price or measurement value check code accordingly.
Appendix A of this standard is a normative appendix.
This standard is proposed and managed by the National Logistics Information Management Standardization Technical Committee.
Drafting unit of this standard: China Article Coding Center.
The main drafters of this standard are Luo Qiuke, Qing Yingdi, Zhang Chunyuan, Li Ning and Du Jingrong.
This standard was first issued in 2000 and this is the first revision. The clauses in the following documents become the clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB12904 Product barcode (GB12904-2003, ISO/IEC15420:2000, NEQ)
GB/T12905 Barcode terminology
GB/T14257 Product barcode symbol position Preface III
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Coding 1
4.1 13-digit code without price information 1
4.2 13-digit code with price information 2
4.3 8-digit code 2
5 Barcode representation and symbol quality evaluation 2
6 Placement of barcode symbols in stores 2
Appendix A (Normative Appendix) Method for calculating the check code of price or measurement value 3
Some standard content:
ICS35.040 National Standard of the People's Republic of China GB/T18283-2008 Replaces GB/T18283-2000 Barcode for commodity-Bar codein-store2008-07-16Release Digital security device General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of China 2009-01-01Implementation Normative reference documents 3Terms and definitions 4Coding 4.115-digit code without price information4.213-digit code with price information 4.38-digit code.. .. 5 Barcode Representation and Symbol Quality Evaluation Placement of In-store Barcode Symbols Appendix A (Normative Appendix) Calculation Method of Check Code for Price or Measurement Value GB/T18283-2008 GB/T18283-2008 This standard is based on the GSI General Specification (Eighth Edition) formulated by the International Article Numbering Association (GS1), and in combination with my country's actual situation, GB/T18283-2000 "In-store Barcode" has been revised. This standard replaces GB/T18283-2000. Compared with GB/T18283-2000, this standard has the following major changes: The standard name is changed to "Commodity Barcode In-store Barcode". The scope of the original standard was changed from "This standard specifies the encoding, symbol representation and technical requirements of in-store barcodes. This standard applies to the barcode identification of variable consumption units of goods in the store closed-loop system." to "This standard specifies the encoding, barcode representation, symbol quality evaluation and placement of barcode symbols of in-store barcodes. This standard applies to the barcode identification of goods processed by stores for sale in stores and variable retail goods. only gives the numbers and names of the standards referenced in this standard, and changes the original referenced standard GB/T168301997 Storage and Transportation Unit Barcode" to GB/T14257 "Commodity Barcode Symbol Position". The definition of in-store barcodes in the original standard was changed to "Store Closed Loop The "barcode that identifies the variable consumption unit of goods in the system" has been changed to "the barcode with a prefix code of 20 to 24, which is used to identify the goods sold in the store's processing store and the variable retail goods". The definition of variable retail goods has been added. In terms of the code structure of the in-store barcode, a 13-digit code and an 8-digit code that do not contain information such as price have been added; the code structure of the original variable consumption unit has been adjusted and renamed as "a 13-digit code containing information such as price", the concept of "goods item code" has been deleted, and the "price (measurement value) code" has been changed to "price or measurement value code", and the "price (measurement value) verification code" has been changed to "price or measurement value verification code". The evaluation of the quality of in-store barcode symbols has been added. The placement of in-store barcode symbols has been increased. The calculation method of the price (measurement value) check code in the appendix is retained and renamed as "Calculation method of the check code of price or measurement value", and the "price (measurement value) check code\" in the appendix is changed to "check code of price or measurement value" accordingly. Appendix A of this standard is a normative appendix. This standard is proposed and managed by the National Technical Committee for Logistics Information Management Standardization. The drafting unit of this standard: China Article Coding Center. The main drafters of this standard: Luo Qiuke, Qing Yingdi, Zhang Chunyuan, Li Ning, Du Jingrong. This standard was first issued in 2000 and this is the first revision. Field 1 Scope Product barcode In-store barcode This standard specifies the encoding and barcode representation of in-store barcodes , symbol quality evaluation and placement of barcode symbols. This standard applies to the barcode identification of goods sold in stores and variable retail goods processed by stores themselves. 2 Normative references GB/T18283-2008 The clauses in the following documents become the clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) are not applicable to this standard. However, the parties who have reached an agreement on the standard may study whether the quantitative versions of these documents can be used. For all undated referenced documents, the latest version applies to this standard. GB12904 Commodity barcode GB1298 GB/T12905| |tt||GB/T14257 3 Terms and definitions GB/T129 In-store barcode Barcode language Quantity barcode symbol established and codein-store product barcode with prefix code 202 Note: 5-digit in-store route pre-order code is 2 variable retail product eriahleme in the retail trade process 4 Coding cannot be pre- 4.1 Gold code that does not contain price and other information 4.1.1 Structure products sold in stores and variable retail products. The 13-digit code that does not contain information such as price is composed of a prefix code, a commodity item code and a check code. Its structure is shown in Table 1. Table 1 Structure of 13-digit code that does not contain information such as price Prefix code 4.1.2 Prefix code XX1 is the prefix code, and its value is 20~24 4.1.3 Commodity item code Commodity item code XXax,xx,xx,x,x,x XX is the commodity item code, which consists of 10 digits and is compiled by the store. 4.1.4 Check code Check code X is the check code, which is a 1-digit number calculated based on the first 12 digits and is used to check the correctness of the entire code. The calculation method is shown in GB12904. GB/T18283—2008 4.2 13-digit code containing price and other information 4.2.1 Structure The 13-digit code containing price and other information consists of five parts: the prefix code, the commodity type code, the price or measurement value check code, the price or measurement value code and the verification code. Among them, the price or measurement value check code can be omitted. The 13-digit code containing price and other information is divided into four structures, and their structures are shown in Table 2. Table 2 13-bit code structure containing price and other information Structure type Structure 1 Structure 2 Structure 3 Structure 4 4.2.2 Prefix code Prefix codebzxz.net Commodity type code XXX,X,X,X XuXoX,XX, XnXeX,Xx, XXlz is the prefix code, and its value is 20~-24. 4.2.3 Commodity type code Check code for price or measurement value Price or measurement value code Xx,xxXa It consists of 4 to 6 digits and is used to identify different types of retail goods. It is compiled by the store itself. 4.2.4 Price or measurement value code is composed of 4 to 5 digits and is used to indicate the price or measurement value information of a specific retail commodity. 4.2.5 Check code for price or measurement value Check code Structure 3 and Structure 4 contain the check code for price or measurement value, which is a 1-digit number calculated based on each digit of the price or measurement value code and is used to check the correctness of the entire price or measurement value code. The calculation method is shown in Appendix A. 4.2.6 Check code X is the check code, which is a 1-digit number calculated based on the first 12 digits and is used to check the correctness of the entire code. The calculation method is shown in GB12904. 4.3 8-digit code 4. 3.1 Structure The 8-digit code consists of a prefix code, a commodity item code and a check code. Its structure is shown in Table 3. Table 3 8-digit code structure of in-store barcode Prefix code 4.3.2 Prefix code Consists of 1 digit, its value is 2 4.3.3 Commodity item code Commodity item code XX,X,XX,X X~X is the commodity item code, consisting of 6 digits, compiled by the store. 4.3.4 Check code Check code X is the check code, which is 1 digit, calculated based on the first 7 digits, used to check the error of the entire code. The calculation method is shown in GB12904. Barcode representation and symbol quality evaluation Barcode representation and symbol quality evaluation for in-store barcodes can be found in GB12904. Placement of in-store barcode symbols Placement of in-store barcode symbols can be found in GB/T142572 GB/T18283--2008 Appendix A (Normative Appendix) Calculation method of checksum for price or measurement value Weighted product In the calculation process of checksum for price or measurement value, a specific operation rule, i.e. weighting factor, is assigned to each code position in the price or measurement value code, including 2-, 3-, 5-+, 5-, etc. The result of mathematical operation on the numerical value in the price or measurement value code according to the corresponding weighting factor is called weighted product. Table A.1, Table A.2, Table A.3 and Table A.4 give the weighted products of the value 09 calculated according to the weighting factors 2-, 3, 5+ and 5 respectively. Weighted product corresponding to weighting factor 2 Code value Weighted product Weighted product corresponding to weighting factor 3 Code value Weighted product Weighted product corresponding to weighting factor 5+ Code value Weighted product Weighted product Weighted product corresponding to weighting factor 5 Code value Weighted product A. Calculation of checksum for 24-digit price or measurement value code A.2.1 Calculation method (The price or measurement value code position numbers are arranged in order from left to right) Step 1: Table A.5 gives the weighting factors to be used for each code position. Compare Table A1, Table A.2 and Table A.4 to obtain the weighted product corresponding to the value of each code position. Table A.5 Weighted factor allocation rules for 4-digit price or measurement value codes X Code position serial number Weighting factor Step 2: Add the results of the first step. Step 3: Multiply the result of the second step by 3, and the unit digit of the result is the value of the check code. A.2.2 Application example Calculation example of the check code of price code 2875 (i.e. 28.75 yuan): 3 GB/T18283-20C8 Code position number Weighting factor Price code 1. Obtain the weighted product according to Table A.1, Table A2 and Table A.4 2. Sum 3. Multiply the result of the second step by 3 Take the unit digit of the product 9 as the required price check code A.35-digit price or measurement code check code calculation A.3.1 Calculation method (Price or measurement code position numbers are arranged from left to right) 1 Step 1: Table A.6 gives the weighting factor to be used for each code position. Compare Table A.1, Table A.3 and Table A.4 to obtain the weighted product corresponding to the value of each code position. Table A. Rules for assigning weighting factors to 65-digit price or measurement value codes Code position number Weighting factor Step 2: Add the results of the first step, i.e., the weighted products, and calculate the sum. 3 Step 3: Subtract the result of the second step from the number that is greater than or equal to the result of the second step and is the smallest integer multiple of 1C. Step 4: Find the weighted product in Table A.4 that has the same value as the result of the third step. The code value corresponding to the weighted product is the value of the check code. A.3.2 Application example Calculation of the check code of price code 14685 (i.e. 145.85 yuan) Code position number Weighting factor Price code 1. Obtain the weighted product according to Table A.1, Table A.3 and Table A.4 2. Sum 3. Subtract the result 4 obtained in the second step from the number greater than or equal to the result obtained in the second step and the smallest integer multiple of 10 10. Look up Table A.4 to obtain the code value corresponding to the weighted product 7, which is 6, i.e. 6 is the check code required+ GB/T18283-2008 People's Republic of China National standard Product barcodeIn-store barcode GB/T18283-2C0 8 Published and distributed by China Standards Publishing House No. 16, Sanlihebei Street, Fuxingmenwai, Beijing Postal code: 100045 Website: epc.net.cn Tel: 68523946 68517548 Printed by Qinhuangdao Printing Factory of China Standards Publishing House Distributed by Xinhua Bookstores in various places Format: 88c×12301/16 Printing sheet: 0.75 Word count: 11,000 words First edition in November 2008 First printing in November 2008 Book number: 1550661-34295 Price: 14.C0 yuan If there is any printing error, the publishing center of our company will replace it. Copyright infringement will be investigated Report telephone: (010) 68533533That is, 6 is the required check code +|tt||GB/T18283-2008 People's Republic of China National Standard Product Barcode Store Barcode GB/T18283-2C08 Published and Distributed by China Standards Publishing House No. 16, Sanlihebei Street, Fuxingmenwai, Beijing Postal Code: 100045 Website: epc.net.cn Tel: 68523 946 68517548 Printed by Qinhuangdao Printing Factory of China Standard Press Distributed by Xinhua Bookstores in various places Format 88c×12301/16 Printing sheet 0.75 Word count 11,000 words First edition in November 2008 First printing in November 2008 Book number: 1550661-34295 Price 14.C0 yuan If there is any printing error, the distribution center of our company will replace it. Copyright infringement will be investigated Report telephone: (010) 68533533That is, 6 is the required check code +|tt||GB/T18283-2008 People's Republic of China National Standard Product Barcode Store Barcode GB/T18283-2C08 Published and Distributed by China Standards Publishing House No. 16, Sanlihebei Street, Fuxingmenwai, Beijing Postal Code: 100045 Website: epc.net.cn Tel: 68523 946 68517548 Printed by Qinhuangdao Printing Factory of China Standard Press Distributed by Xinhua Bookstores in various places Format 88c×12301/16 Printing sheet 0.75 Word count 11,000 words First edition in November 2008 First printing in November 2008 Book number: 1550661-34295 Price 14.C0 yuan If there is any printing error, the distribution center of our company will replace it. Copyright infringement will be investigated Report telephone: (010) 68533533 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.