JB/T 2001.2-1999 Types and dimensions of plunger glands for water systems (PN=20MPa)
Basic Information
Standard ID:
JB/T 2001.2-1999
Standard Name: Types and dimensions of plunger glands for water systems (PN=20MPa)
Chinese Name:
水系统 柱塞压盖 型式与尺寸(PN=20MPa)
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-06-28
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Fluid systems and general parts >> 23.100 Fluid power systems
Standard Classification Number:Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
Publication information
other information
Focal point unit:Metallurgical Equipment Standardization Technical Committee
Introduction to standards:
JB/T 2001.2-1999 JB/T 2001.2-1999 Types and dimensions of plunger glands for water systems (PN=20MPa) JB/T2001.2-1999 Standard download decompression password: www.bzxz.net
Some standard content:
IC.s$ 23.110
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
Standard of the Machinery Industry of the People's Republic of China
Water system Plug glund-Type and size[ PN-20 MPa J
This standard specifies the characteristics and dimensions of the column width cover for use in the case. This standard applies to all kinds of seal plug covers with a nominal force of 20MPa. The provisions of the referenced standard
JB/T2E01.2-[999
underlined standard are included, and the provisions become non-standard provisions through the use of the numbers in this standard. This standard is published and all versions are effective: All standards will be revised. All users of this standard should consider the possibility of using the latest version of the standard: JBT2001.1-1999 This system is located in Multiplication difference starting size [MI = 31.MPa] 3 types and dimensions
3.1DN40-200mm housing cover connection JB/T2001.1 provisions. 3.2YN22-20G0mm type and dimensions meet the current provisions of Figure 1 and Table 1. +..
【· Press, 2 pieces of women;? Get flower pad: 4-plum flower lower plate: 5 Da: 6 baking ten, 7-nut, F--Hui property
Taojia Machinery Industry Bureau 159--28 approved
2000-01-01 implementation
JGT 2(KG1.2.1
JB/)2001.2.2
JRT20U1.2 +
JB:T 2GO1.2.5
JB:T2GOI2.6
JT:T 2G01 2.:
T 2001 2.8
.w: 2 00:.2.9
JB/J 2001.2.10
JBT20O1.2.:1
W 21712
IH:I 241.2 14
JB:T 2C1.2.13
JB:T 200I2.16
.TT5:T 2001 2.17
JI:T 20U1.2.18bzxZ.net
3 200.2.19
:B200:.2.20
H3M1.2.11
JH/2X1.2.
11 7 x1.2.23
JB:1 2X12.24
JB:1 2iK1.2.25
15-T 20H11.2.26
JB2001.2.27
JB line 2001.2.28
JT 211 2 24
JN-1 Z011.7 30
JT 2001.23E
1Marking example
H9;dr:
JE/2001.2—1999
10 × 30
12×M×1
1 12 >M42 x3
Diameter 230rm Performance benefits:
115 core
16×42×3
15 ×M48×3
20 M483
20 × M56 × 4
230IB/T2001.2..1999
24 ×M6:4
24×M:1×4
2X11x12
4×M12.15
×M×1:
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.