title>HG/T 3597-1999 Acid Brown P-RB (Weak Acid Brown RL200%) - HG/T 3597-1999 - Chinese standardNet - bzxz.net
Home > HG > HG/T 3597-1999 Acid Brown P-RB (Weak Acid Brown RL200%)
HG/T 3597-1999 Acid Brown P-RB (Weak Acid Brown RL200%)

Basic Information

Standard ID: HG/T 3597-1999

Standard Name: Acid Brown P-RB (Weak Acid Brown RL200%)

Chinese Name: 酸性棕P-RB(弱酸性棕RL200%)

Standard category:Chemical industry standards (HG)

state:in force

Date of Release1999-04-20

Date of Implementation:2000-04-01

standard classification number

Standard ICS number:Chemical Technology>>Chemical Products>>71.100.01 General Chemical Products

Standard Classification Number:Chemicals>>Coatings, Pigments, Dyes>>G57 Dye

associated standards

Publication information

other information

Introduction to standards:

HG/T 3597-1999 Acid Brown P-RB (Weak Acid Brown RL200%) HG/T3597-1999 Standard download decompression password: www.bzxz.net

Some standard content:

1CS-71.100-01
Chemical Industry Standard of the People's Republic of China
(1999))
1999-04-20 Issued
2000-04-01 Implementation
Petroleum and Chemical Industry of China
Registration No.: 2790
HG/T3597-1999
Public Standard The test conditions are selected according to the relevant provisions of the national standard GH/T3378-8 acid fast tripod material color light intensity determination film method>, and the test method of dyeing color light and surface degree is developed and determined. The inspection items and technical standards are determined by referring to the standards of similar dye products and small production periods. The inspection items in the standard are all tested in parallel using the test methods specified in the national standards or industry standards. This standard is proposed by the Technical Supervision Department of the Ministry of Chemical Industry of the People's Republic of China. The standard is issued by the National Material Standardization Technical Committee. This standard was initiated by: Shenyang Chemical Research Institute, Zhenjiang Jingjiu Chemical Co., Ltd., and the main contributors of this standard are: Ding Jingwen, "Shu Chengren Di, Tu Shuo 1 Scope
Chemical Industry Standards of the People's Republic of China
Acid Brown P-RB
(Weak Acid Brown RL 200%)
Acld Brown P-RH
(Weak Acid Bromu R I.D)
HG/T35971999
The third standard specifies the requirements, sample aging method, inspection rules, marking, packaging, transportation and storage of acid P-RH (CI acid Bromu R I.D). This standard uses 2-hydroxy-5-hydroxy-1-base chemically-treated products to make late-stage nuclear products with single-level, copper-free, and rare-earth dyeing and printing structural formula, sub-formula O.Na
respectively, mass, 516.46 (according to the 15th International Standard for Atomic Mass 2 Reference Standards
The following standards contain clauses that are used in this standard to constitute the clauses of this standard: When the standard is published, the versions shown are valid. All standards will be revised. The parties to this standard are welcome to discuss the possibility of using the latest versions of the following standards: GB/T 2874.-F4
Dyes-free dyeing--Specify the provisions
CB/T 2378-&0
3581--94
2563-81
2386-30
Method for determination of color and strength of dyeing materials--Measurement method for dyeing without dyeing--Measurement method for measuring the sieving fineness of dyes--Measurement method for measuring moisture content in dyes and dyeings--97
Color fastness to environmental conditions (em15) 165-X121993) Textiles
593*,2-1397
3922-1491
GB/TG:53
CB/T 9-127
Color fastness test for textiles: color fastness test 2 (VJS>10.5-C62:1989) color fastness test (S) 10-0)
1/1 dyestuff dyeing standard depth color card
medical textiles
training textiles
waste-free test difference water fastness quality (c150)) 1c5Ec19) color car test questions
color test
national petroleum and chemical industry 1999 04 20 approved hot pressing color medium q501331114
light color welcome (150105-02194)
2000-0401 practical
3 requirements
3.1 appearance, black to nuclear color sentence end
HG/T 35971999
3. 2 acid brown R3 quality and should meet the requirements of Table 1 Table 1 acid raw material P-RB quality requirements
process room. public
no impurities
fine, change; pass 1I U: relative content; Y water
beam color sample
single piece P-real wool fabric on the nest color rate should be lower than the provisions of Table 2 light
for the standard year
1 standard agent near low ~ effective
table? Acid standard PRB on the sheep seven fabrics to half degree strong flow
.- dye fish production depth:
4 sampling
positive hot pressing
--4 1 --:
from the year batch with a very uniform product as a batch of products of the catch, the small batch shall not be less than barrels. The sample packaging must be intact. When buying samples, do not let the outside world fall into the product. Take samples from the upper, middle and lower parts with probes. The sample quantity should not be less than 209. After the obtained products are fully divided, they are packed in a brown ball with a grinding mouth and sealed. The bottle is labeled with: the name of the product, whether it is changed, the sampling date, the box is used, and the version is kept for future use. 5 Test method
5.1% Determination
H daytime visual determination
5.2 Color test
5.2.2 Dyeing degree
is 12, and the color is + point flying (to be beautiful fabric) than the year! 5.2.3 Dyeing agent: Qinxin 15/2378 ten weak dyes are prepared according to the provisions of the dye bath. In five 300L of dye, add 3% of the existing dye to make a dye bath of 46% c.5/nmoL standard depth reduction. In the test city, dilute nL acid solution, 10g/l acid resistant grade, 1(-k/L anhydrous sodium sulfate, add to the product volume. 5.2.4 Color replacement: HG/T 3597
Preparation of dye bath
Put the prepared dye in water, heat it to 40℃, put the unpenetrated wool fabric into the dyeing, increase the flow rate to 9-9℃, continue dyeing at 3℃. Take the dye out of the water, let the liquid cool to 53-0℃, and then take out the dye without washing. 5.2.6 Evaluation of color and shade
According to the relevant provisions of GE/23
5.3 Determination of water-soluble content
According to the provisions of GE/12.181
5.4 Determination of dyeing speedbzxZ.net
According to the relevant provisions of GE/12.181
GH/T238s is used as the current standard, and the filter screen price is 180um: 5.5 Determination of moisture content
shall be carried out according to the provisions of GB/T2S261\common method\ 5.6 Determination of color flatness before friction and color fastness on hand-held fabrics shall be carried out according to the provisions of product T3S2C. Determination of color fastness to water shall be carried out according to the provisions of CB/Gate 3521.2. Determination of color fastness to downstream flow shall be carried out according to the provisions of 6B3922: Determination of water color solidity shall be carried out according to the provisions of GT7\3. And the determination of hot pressing color rate shall be carried out according to the provisions of GB/T13. Determination of light color before pressing at 180L shall be carried out according to the provisions of (15/8427: 6 Inspection rules
5.1 Classification
3.1~3.3 of this standard are type inspection items. 3.1-2 are factory inspection items. 3. Each item shall be inspected once a year during continuous production:
6.221. Production inspection
The acid PR shall be inspected by the quality inspection department of the manufacturer. The manufacturer shall ensure that the acid PR products leaving the factory meet the requirements of this standard. Each batch of acid PR shall be issued a quality certificate in the same format as the factory's. 63 The production and use unit shall accept the required acid PR in accordance with the provisions of the vehicle consumption and other items to check whether it meets the requirements of the technical standard.
6.4 Re-test
If one of the indicators in the test results does not meet the requirements of this standard, a sample should be taken from the double-packed packaging for re-test. If only one indicator does not meet the requirements of the standard, the whole batch of products cannot be accepted.
HG/r3597-1999
7.1 The outer packaging of acid brown PR shall be painted with a solid and anti-smudge mark indicating: manufacturer name, factory address, product name, registered trademark, standard abbreviation, product number, product weight, weight and net weight. 7.2 Each batch of acid brown PR shipped from the factory shall be accompanied by a quality certificate. The content includes: manufacturer name, product name, certificate number, specification, date of manufacture and net weight, product quality compliance with this standard and standard number. 7.3 P.RB should be installed in the inner plastic packaging. Net weight of 30k can be determined through negotiation with the user.4. Avoid strong shock during transportation. Prevent damage to the product. Handle with care and avoid soil damage. 7.5 Acid PRB products should be stored in a well-ventilated place under open air and should not be exposed to heat or chemicals.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.