GB/T 2884.8-1996 Yangtze River system section barge model standard series--Yangtze River tributary 200 ton section barge model standard
Basic Information
Standard ID:
GB/T 2884.8-1996
Standard Name: Yangtze River system section barge model standard series--Yangtze River tributary 200 ton section barge model standard
Chinese Name:
长江水系分节驳船型尺度系列--长江支流200吨级分节驳船型尺度
Standard category:National Standard (GB)
state:Abolished
Date of Release1996-06-17
Date of Implementation:1997-01-01
Date of Expiration:2005-10-14
standard classification number
Standard ICS number:Shipbuilding and offshore structures >> 47.060 Inland vessels
Standard Classification Number:Ships>>Ship General>>U14 Inland Waterway Transport Ship General
Publication information
other information
Review date:2004-10-14
Drafting unit:Institute of Standards and Metrology, Ministry of Transport
Focal point unit:National Technical Committee for Inland Waterway Standardization
Publishing department:Ministry of Transport
competent authority:Ministry of Transport
Introduction to standards:
GB/T 2884.8-1996 Yangtze River Sectional Barge Model Standard Series - Yangtze River Tributary 200-ton Sectional Barge Model Standard GB/T2884.8-1996 Standard download decompression password: www.bzxz.net
Some standard content:
GB/T 2884.8—1996
This standard is a revision of GB2884.8—81. After the revision of this standard, the original GB2884.8—81 will cease to exist. The division of waterways in this standard is consistent with the requirements of GBJ139—90 Inland Waterway Standard. This standard was proposed by the Ministry of Communications of the People's Republic of China. This standard is under the jurisdiction of the National Inland Waterway Ship Standardization Technical Committee. The drafting units of this standard are the Institute of Standards and Metrology of the Ministry of Communications and the Yangtze River Ship Design Institute. The drafters of this standard are Liu Yiru, Xiang Zhizhong and Wang Feifei. This standard was first issued on December 31, 1981. The Yangtze River Ship Design Institute is entrusted with the interpretation of this standard. 14
W. National Standard of the People's Republic of China
Dimensiton serles or Lntegrated harges tor the chaagjlang waterways--Dimensions of Integrated barges for 200-ton tributaries of the Yangtze River--Dimensions of Integrated barges for brnch roites of.the Chatgjteng-200DWT
Scope of sales
GB/F 2884.8—1996
GE 2BB4. 8——81
This standard specifies the general requirements, model composition and markings of the 200-ton sectional barges of Changting. This standard is applicable to sectional barges sailing on the tributaries of the Changfa River, and other water system sectional barges may be implemented accordingly. 2—General requirements
2.1 General type tonnage: 200t.
2.2 Ship type standards: total length 30m, beam 7.5m, draft 1.3~1.5m, 3 Model composition
The model consists of four parts:
.4 Mark
Barge tonnagewww.bzxz.net
“节” is the first letter of the Wen Chinese pinyin, indicating \分”, “支” is the first letter of the Chinese pinyin, indicating “tributary”, “长” is the first letter of the Chinese pinyin, indicating “Yangtze River” 4.1 Each barge is equipped with the following contents The following are the signs: a) ship model, factory serial number, standard number 1 b) overall length, waterline length, width, depth, design draft, full load displacement 1) manufacturer name:
d) year and month of construction.
4.2 The sign is rectangular in shape, 330mm long and 200mm wide, and is made of metal material (copper, wax or other). Approved by the State Technical Supervision Bureau on June 17, 1996 and implemented on January 1, 1997
W.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.