This standard specifies the dimensions, shape, weight and allowable deviation of hot rolled round wire rod. This standard applies to round wire rods of various types of steel with a nominal diameter of 5mm to 40mm. GB/T 14981-2004 Dimensions, shape, weight and allowable deviation of hot rolled round wire rod GB/T14981-2004 Standard download decompression password: www.bzxz.net

ICS 77. 14D. 65
National Standard of the People's Republic of China
GB/T14981—2004
Replaces GB/1149811994
Dimensions, shape, weight and tolerances of hot rolled wire rods
(ISO/DIS 16124 Steel wire rod-dimensions and tolerances, MOD)2004-06-09Promulgated
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
2004-12-01Implementation
Network secret
For reference only
National Standard of the People's Republic of China
Dimensions, shape, weight and tolerances of hot rolled wire rodsG3/T 49R1 :2024
Published and distributed by China Standards Press
No.16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal code: 1c0043
Website: bzchs.con
Tel: 68523946
68517548
Printed in Qinhuangdao by China Standards Press! Printed and sold in Xinhua Bookstores all over the country
Printing sheet 0.5 hen Number 8,000
Format 880×123C 1/15
First edition September 2001
First printing September 4, 2004
Book number: 155066: 1-21609
If there is any printing error
Price 8.90 yuan
Replaced by the issuing center of this company
Copyright exclusive Infringement must be investigated
Report telephone: (010) 68533533
This standard is modified to adopt ISO/DIS:G124% wire rod Foreword
GB/T 14981—2004
Dimensions and Deviations This standard amends GB/T14981—1991: The main technical differences between this standard and IS()/DIS16121 are: This standard only selects the circular cross-section wire rod part in 130/LIS15124, and appropriately narrows the nominal diameter range of the wire rod: ·…Specify the degree requirements of different groups: Add the definition of Article 2.4;
Add the requirement for wire rod weight.
The main changes of this standard compared with GR\T14981-1994 are as follows: expansion of nominal diameter of wire rod (expanding the nominal diameter range from 5.5mm~30mm to 5mm10mn); 1 (raising the nominal diameter of 15mm from the original third grade to the first grade); Table 1 (increasing the allowable deviation of diameter to Class A precision and Class B precision); 2.2 tightening the indicators (the allowable deviation of the original diameter shall not exceed ±50mm. The out-of-roundness shall not exceed .80mm and the allowable deviation of the diameter shall not exceed ±0.49mm); Chapter 3 (reducing the number of groups from 5 to 2) cancelling the original Article 3.2;
cancelling the original Chapter 4;
When there is a dispute over size and deviation, the specific measurement position is specified (Chapter 5 of the 1994 edition, Chapter 4 of this edition). Appendix A of this standard is a reference for information. This standard was proposed by the China Iron and Steel Association and is under the jurisdiction of the National Technical Committee for Steel Standardization. Drafting units of this standard: Metallurgical Industry Information Standards Research Institute, Magushan Iron and Steel Co., Ltd., Jiangsu Shagang Group Co., Ltd., Xuanhua Iron and Steel Group Co., Ltd. Main drafters of this standard: Tu Leng, Tu Lijuan, Huang Zhiyu, Zhang Shuxing, Liu Yulan, Huang Dongsheng, Zhang Pianhui. This standard was first issued in 1994. 1 Scope Dimensions, shape, weight and allowable deviations of hot-rolled wire rods This standard specifies the dimensions, shape, weight and allowable deviations of hot-rolled wire rods. This standard is applicable to round wire rods of various types of steel with a nominal diameter of 5mm to 40mm: dimensions, shape and allowable deviations The nominal diameter and nominal cross section of the wire rod are listed in Table 1. The allowable deviation of the cut diameter shall comply with the provisions of the corresponding level of accuracy in Table 1. 2.2 Nominal diameter
Grade A precision
Grade B precision
Grade C precision
Grade A precision
Out-of-roundness
Grade B precision
Grade C precision
GB/T 14981—2004
Ring weight/
Cross-sectional area
(kg/m)
GB/T14981—2004
Nominal diameter?
Grade A precision
Allowable deviation/mm
Grade B precision
.- 0. 4:
Grade C precision
=r, 25
Table 1 (thread)
A-level accuracy
Out of roundness/mm
1Double precision
C-diameter accuracy
2.3Accuracy level to point can be specified in the corresponding product standard or individual. If not specified, it shall be implemented according to level 4 precision. Yellow cross-sectional area, five
Theoretical weight,
(xR/m)
7, 99
2.4If specified in the contract, the nominal mutual diameter nn~1CmiIm The allowable deviation of the diameter is not large. 4 cmm can be delivered. 2.5 mm. According to the requirements of the buyer, other nominal diameter wire rods can be supplied after the agreement between the supply and demand parties. The allowable deviation shall be in accordance with the provisions of the adjacent smaller specifications.
3 Weight bzxz.net
3.1 The theoretical weight of the wire rod is listed in Table 1. The thickness is calculated as 7.85 cm. 3.2 The group of hot wire rods shall be in accordance with the provisions of Table 2. The number of coils in each batch (2 coils are allowed if less than 2 coils) shall consist of two rods. The group of wire rods shall be clearly marked.
1x 5:00
3.3 The weight group of wire rods shall be indicated in the contract. If not indicated, it shall be delivered as group II. 4 Inspection
GB/T14981—2004
Minimum weight of each pole wire rod/kg
Not less than
If there is any dispute about the size, shape and allowable deviation of the wire rod, it should be measured at 4m from the end of the wire rod. A
Network density
GB/T 14981—2004
Appendix A
(Informative Appendix)
Technical differences between this standard and ISO/DIS 16124 and their causes Table A.1 gives the technical differences between this standard and ISO/DIS 16124 and their causes. Table A.1
Chapter number of this standard
Chapter 1
Technical differences
Only the round surface wire rod part is taken, and the nominal diameter range is appropriately reduced
Specific requirements for non-instantaneousness are specified according to different groups. Add: Clauses specified in the contract
Add! Requirements for wire weight
GB/T14981-2004
Determined according to the actual production situation and equipment level in my country at present
Consistent with the previous version, suitable for my country's national conditions, in line with my country's current production and actual use conditions, determined according to my country's current production and actual use conditions
Network theft
For reference only
Distance rights are reserved
Book number: 155066 1 21600
Price:
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.