JB/T 2462.27-1999 This standard is a revision of JB 3198-83 "Dimensions of facing cutters for common components of modular machine tools". Only editorial changes have been made according to relevant regulations, and the main technical content has not changed. This standard specifies the relevant interchangeable dimensions of facing cutters for modular machine tools. This standard applies to facing cutters for single-axis boring and facing heads of modular machine tools. This standard was first issued in 1983. JB/T 2462.27-1999 Dimensions of facing cutters for common components of modular machine tools JB/T2462.27-1999 Standard download decompression password: www.bzxz.net

1C25.6.99
Machinery Industry Standard of the People's Republic of China
JB/12462.1~2462.28-1999
Combination Machine Tool Common Parts
1990-05-21 Issued
National Machinery Industry Bureau
2(MI-01-1 Implementation
JB/T2462.27-1999Www.bzxZ.net
This standard is revised on the basis of JB319883 Multi-combination Machine Tool Common Parts Turning Plate Dimensions
This standard is consistent with the technical content of JB719883, and has been edited with the relevant provisions. The blank standard replaces JB3198 from the date of this announcement. This standard is proposed by the Technical Committee for Standardization of Metal Cutting Machine Tools: The Technical Committee for Standardization of Metal Cutting Machine Tools, Combination Machine Tool Branch The drafting unit is Dalian Weaving Machine Tool Research Institute. This standard was first issued in 1983.
■Scope
Machinery Industry Standards of the People's Republic of China
Common Parts of Modular Machine Tools
Face Turning Cutter Dimensions
This standard specifies the interchangeable dimensions of face turning tools of modular machine tools. The narrow standard is applicable to the face turning cutter of the single-axis boring and flange end facing heads of modular machine tools. 2. Reference Standards
FB/T2462.27 —1999
The provisions contained in the following standards are technical standards that are referenced in this standard. The versions shown in this standard are valid. All standards will be revised. The parties using this standard should also explore the possibility of using the latest versions of the following standards: GH5.1-1999 Interchangeable dimensions of spindles and faceplates Part 1: AGB/T5900.2 [99? Interchangeable dimensions of faceplates on machine tool spindle ends Part 2: Cam lock shape GB/T5900. 31997 Interchangeable dimensions of machine spindle end and faceplate Part 3: F-type 3 Nominal dimensions
The nominal dimensions of the faceplate are specified with the corresponding nominal dimensions of the single-cut and faceplate heads 4 Interchangeable dimensions
The interchangeable dimensions of the faceplate are in accordance with the provisions of Figure 1 and Table 1. Approved by the Bureau of Machinery Industry of South China on May 20, 1999 G
Implementation on January 01, 2000
5 Cutting head end
Eight-cutting head first product
JB/T 2462.27—1999
Erpan thick joint
Liu Mouxing standard 5
Single-axis sharpening and facing head
Each main code
Including: 1
11: 15
The end facing cutter disc is the same as the end of the earth shaft of the single-axis boring and facing head, and its type and size are in accordance with the provisions of GB/S900.1, GB/5900.2GB/T5900 3 respectively.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.