This standard specifies the technical requirements, test methods and inspection rules for backup fire trucks. This standard applies to backup fire trucks. GA 412-2003 Backup Fire Truck GA412-2003 Standard download decompression password: www.bzxz.net

ICS 13,220.01
People's Republic of China Public Security Industry Standard G4 412—2003
Auxiliary fire truck
Auxiliary rirevehicle
Published on 2003-01-29
Published by the Ministry of Public Security of the People's Republic of China
Implemented on 2003-07-01
5.21.52.4, 5.2.7.5.5.2.2.5.6.2 of this standard are mandatory texts. The rest are recommended texts. This standard is issued by the Fire Fighting Bureau of the Ministry of Public Security. The issuing unit of this standard is the Shanghai Fire Science Research Institute of the Ministry of Public Security. The drafters of this standard are Luo Xule, Ma Zuobei, Xia Qi, Liang Jilin, Li Wenjie and Huang Xiaoxiao: GA412—2003 1 Scope This standard is for the technical requirements, test methods and inspection rules of rear-shoulder fire trucks. This standard is applicable to: Fire Fighting 4 (Waiting for you to start the car) 2 Normative References GA412—2003 The following documents have become the clauses of this standard through the use of this standard. All the documents with a date of use and all subsequent revisions (excluding errata) or versions are not applicable to this standard. However, the parties to this standard who have reached an agreement may use the latest versions of these documents. For undated referenced documents, the latest versions are applicable to this standard. GF30-198 Pressure Vessels
G5/T149S—197 Noise Measurement Method for Motor Vehicles GB/T624419R6 Series, Formulas, Basic Parameters and Technical Requirements for Base Flame for Fire Engines GB2451988 Performance Requirements and Test Methods for Fire Annexes GH7819S? Motor vehicle operation safety requirements GH7456-1SS8 Fire performance requirements and test methods for fire trucks GA/T 114-2003
Fire truck product model compilation method
QC/T 252-1398
Special vehicle order test method
3 Terms and definitions
The following terms and definitions apply to this standard. 3.1
Rear swing fire truck is a fire truck that supplies various types of fire-fighting equipment to the fire scene. 4 Models and classifications
4.1 The code, term and model compilation method of the fire truck shall comply with the provisions of GA/T114-200. 4.2 The vehicles are divided into water transport vehicles, liquid vehicles, inflatable vehicles, equipment transport vehicles, and white imperial stone joint vehicles. 5 Requirements
The chassis of the vehicle should be the automobile chassis licensed for production or import by the national automobile industry competent department, and the fee requirements are 5/6344--935.
5.2 Complete vehicle
5.2.1 The structural data, quality release data and performance data of the vehicle after the whole vehicle is assembled should comply with the provisions of Table 1 1bzxz.net
CA412-2C03
Water tanker
Wave supply vehicle
Equipment auxiliary vehicle
Creative style
Return to the light!
5.2.2 Number of passengers
Change the size
5 --7 006
5 0Go·-7 x
Length: mm
Number of vehicles
12 cJc
12 ono
Height: 4 meters
( ku'l- Su kut'l?
According to the staff efficiency, there are 2 people and 3 people (including the driver). The total weight of each passenger and the carry-on luggage is: 5.2 3 Maximum departure speed and acceleration time
The maximum speed and acceleration time of the slow car shall comply with the provisions of Table 1: 5.2.4 Braking performance and dynamic performance of the rear derailleur shall meet the requirements of 125-15? Special braking system. 5.2.5 Rainproof sealing performance The rear derailleur seal shall meet the requirements of 1.1.5 of (B79561-58). 5.2.6 Reliability
The reliability of the vehicle shall meet the requirements of 4.1.5 of (T7956-1998). 5.2.7 The noise in the air (excluding the noise of the generator) shall be measured according to the test method specified in 6.7, and the noise level in the passenger compartment shall be less than B (A). 5.2.8 Vehicle manufacturing and assembly requirements
5.2.8.1 The outer surface of all castings shall be smooth , no sand is allowed, the whole system has the defects of expected degree and external pressure or: 5.2.8.2 The welding of the parts should be smooth
5.2.8.3 The joints should be tight and the seats should be neat, and the feed should be neat, and there should be no broken, loose and other defects. 5.2.4 The self-locking equipment of the recessed parts should be equipped with scraping, and the bottom of various pipelines should be fixed. 5.2.5 The fastener seat key of the color gold (except stainless steel) should be black and other attached tests. 5.2.9 Surface quality requirements
5.2.9.1 The surface of the color gold (except stainless steel) should be made of the surface and the frequency anti-magic ratio treatment. 5.2.92 The outer surface of the vehicle should be clean and beautiful, the installation should be semi-solid and flat, and the exposed surface without primer is not allowed to have paint. 5.3 Engine system and power output device
The engine system and power output device should include (FB 7956[SS8 2, 1. 7, 4. 1. R 5.4 Passenger compartments 5.4.1 The floor of the passenger compartment should be flat and dustproof. 5.4.2 The passenger compartment should be flexible and have good airtightness. The door should be opened and closed. 43 The hood should be equipped with some equipment for safe access. The top of the vehicle should be protected and anti-slip, and water can flow down naturally. 5.4.4 Equipment should be able to reasonably place the equipment. 5.4.5 The doors of the passenger compartment and equipment box should be easy to open and close, well-designed, and the door locks should be firm and reliable, and should not open automatically. The doors should be straight and even:
5.4.6 The doors and windows should be made of safety glass, and the glass lifter should be reliable: it should not be lifted out of position, and should have good sealing after closing.
5.5 Water tanker and liquid supply truck
5.5.1 Fire pump
The fire-fighting performance shall comply with the provisions of GB6245-1998: 5.5.2 Water system plan
5.5.2.1 The performance of the water system shall comply with the provisions of 4.2.3, 1.2.4, 1.2.5, 4.2.6, 4.2.7 and 4.2.5 of CB79561998:
5.5.2.2 The water system of the liquid supply truck shall be corrosion-resistant, and the plan and water system shall have disinfection and cleaning facilities. 5.5.3 Water supply path
5.5.3.1 The end wall shall be of steel plate welded structure, the weld shall be smooth, smooth and precise, without defects such as warping, penetration, clamping and cracking.
5.5.3.2 A manhole with a diameter of not less than 4mm shall be provided on the upper part. 5.5.3.3 The body of the sill shall be made of skin-resistant material or shall be treated with anti-corrosion. 5.5.3.4 The drainage outlet shall be set at the bottom of the device, and the water filling tray shall be set at the top. 5.5.3.5 The capacity tolerance of the floor is ±2% when the capacity is greater than or equal to 12000L. When the capacity is less than 12093L, the capacity is reduced by 10L and the absolute value of the actual difference increases by 0.1%.
5.6 Inflatable vehicle
5.6.1 The inflatable vehicle shall be equipped with at least one inflator, and the T of the inflator shall be less than 10MPa. The flow rate is greater than 0 "/mia to ensure that there are more than two inflatable vehicles at the same time. The size of the inflatable joint is G5/8. At the same time, it should be equipped with corresponding electric motors, mobile service lights and lighting equipment for the workbench.
5.6.2 The design and construction of the pressure tank shall comply with the provisions of GB15C-1398, and its corresponding design (or manufacturing> license and product certificate,
5.7 Equipment transport vehicle
The equipment transport vehicle's terminal material layout should be easy to retract and release, the fixing mechanism should be reliable, and it should be classified and arranged according to its purpose and function. 5. Day dump truck
5. Day.1 The same requirements should meet the corresponding functions. 5. Day, 2 The lifting mechanism should act reliably, and it will not affect the normal work after 100 times of continuous lifting. The hydraulic system does not show any leakage phenomenon. The hydraulic components act normally. The ball is abnormal, and the pressure and temperature should not be excessive. 5.3 The vehicle body should be fixed and equipped with a locking mechanism. During driving, the vehicle body should not tilt or shift. 5.9 Operation and instrument monitoring system
5.9.1 Each vehicle under the system should be equipped with corresponding signboards. 5.9.2 Each operation mechanism should be easy to operate and the automatic control mechanism should have emergency measures. 5.9.3 There should be an instrument monitoring system and it should be placed in a convenient position for operation. 5.9.4 The oil should be easy to operate and can keep the cam valve or gear in the specified position. 5. T0 Electrical system
5.13.1 The total average power of all old equipment in the vehicle shall not exceed 1.4 times the rated power of the engine. 5.1.2 The service lights should be installed in the passenger room, instrument panel, room, equipment box, etc. GA412—2003
E Cleaning method
6.1 Appearance, manufacturing and assembly quality of the whole vehicle
Inspect the appearance, manufacturing and assembly quality of the whole vehicle: the results should meet the requirements of 2.2.9.5.4, 5.6.5.7, 5.8.5.9 and 5.20. B.2 The performance test of the vehicle, fire protection and water system shall be carried out in accordance with the provisions of Chapter 5 of GB 7955-1998. The results shall comply with the provisions of 5.2.1.5.3 and 5.5. 5.3 Braking performance shall be carried out in accordance with the provisions of GB 7258-1998. The results shall comply with the provisions of 5.2.4. 6.4 Reliability shall be carried out in accordance with the provisions of 5.6 of GB 7956-1998. The results shall comply with the provisions of 5.2.6. 6.5 Acceleration performance and height of vehicle shall be carried out in accordance with the provisions of 5.3 of GB 7956-1998. The results shall comply with the provisions of 5.8.3. 6.6 Anti-sealing performance
The test should be carried out in accordance with the provisions of GB/T14SG-979, and the result should meet the requirements of 3.2.7. 6.6 Indoor noise
Indoor noise is the method of GB/T14SG-979, and the result should meet the requirements of 3.2.7. 7.1 Type inspection
7.1.1 After the trial production of new products is completed, a type inspection should be carried out, and the sample car for type inspection is 1. 7.1.2 The actual conditions of type inspection shall be in accordance with the provisions of 4.=, 4.2, and 4.3 of QC/2521998. 7.1.3 The type procedure shall be in accordance with 4.4 of QC/252-1996. 7.2 Inspection items
After moving the car, all items of this standard and automobile regulations shall be controlled in age.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.