JB/T 10150-1999 This standard specifies the classification and naming, requirements, test methods, inspection rules, marking and packaging of strong electromagnetic chucks. This standard is applicable to chucks for machine tools used for strong grinding and conventional milling and planing. This standard is published for the first time. JB/T 10150-1999 Strong electromagnetic chuck JB/T10150-1999 Standard download decompression password: www.bzxz.net

ICS 25. 060. 20
Machinery Industry Standard of the People's Republic of China
JB/T 10150—1999
Strong Electromagnetic Suction Cup
1999-10-08 Issued
National Bureau of Machinery Industry
2000-03-01 Implementation
JB/T10150-1999
This standard is formulated by the user. When formulated, the strong electromagnetic suction cup is compared with the general electromagnetic suction cup, mainly because the suction force is increased, thereby expanding the processing range of the machine tool, and can achieve strong cutting, shearing and cutting, and improve efficiency
This standard is proposed by the National Enterprise Cutting Machine Standardization Technical Committee. This standard is promoted by the Yitai Machine Tool Research Institute. The responsible unit for this standard is Linqing Machine Tool Parts Factory. The participating units for this standard are Wuxi Jianhua Machinery Factory, Dongyang Machine Tool Accessories Factory, Tianjin Electric Table Factory. The main contributors to this standard are Bao Huo, Yao Luqing, Ri Zhongyi, Cao Zuoyi. Standard
Machinery Industry Standard of the People's Republic of China
Strong Electromagnetic Suction Cup
JB.T10150-1999
This standard specifies the classification and naming, requirements, test methods, inspection rules, marking and packaging of strong electromagnetic suction cups (hereinafter referred to as suction cups).
This standard is applicable to the heating cups for strong grinding machines with conventional grinding. 2 Reference Standards
The provisions contained in the underlined standards constitute the provisions of this standard through their use in this standard. When this standard is revised, the versions shown are all valid. All standard versions will be revised. The method of using the standard should be tested for marketability using the following global standard versions: GHT998-1982 GD/T 1497:1985 GB/T 4943.2-1993 GB/T 226.J-1996 GB/T 14534-1 (IB.17421.1-1998) GB/T 14534-1 (IB.17421.1-1998) GB/T 14534-1 (IB.17421.1-1998) GB/T 14534-1 (IB.17421.1-1998) GB/T 14534-1 (IB.17421.1-1998) GB/T 14534-1 320T—1991
JB/T993—1999
3 Classification and designation
Low-voltage electrical appliances, basic test methods
Low-voltage electrical appliances monitoring standards
Low-voltage output devices without protection level
.T Industry mechanical and electrical equipment Part 1: General technical conditions Positive magnets and disks
General rules for machine tool inspection Part 1: Geometric accuracy of machine tools under no-load or finishing conditions Model Preparation of force method
Machine tool accessories,
General technical conditions for the packaging of machine tool accessories Preparation of random technical documents of machine tool accessories
3.1 The suction cup is divided into rectangular suction cup and circular pole cup according to its shape. 3.2 The basic form of rectangular suction cup is shown in Figure 1. According to its magnetic pole, it is divided into basic type, multi-purpose type and low magnetic circuit type. The basic parameters and dimensions of the round suction cup are shown in the table! Approved by the State Machinery Industry Bureau on October 8, 1909 2:000-03-01 Implementation
JB/T10150-1999
Many industries
Road type
Figure 1 Basic type of rectangular suction cup
Table length standard
JB/T10150-1999
Rectangular suction cup basic parameters and anti-small
no plate two sides, mX
Surface thickness, min
Screw extraction can be strong
Butterfly removal effect
Screw grid commercial degree
JE/T10 150-100
3.3 Parameters of the mesh suction cup are shown in Figure 2 and Table 2. D
2 Parameters of the mesh suction cup
Table surface
4 Requirements
Suction cup high pressure, dynamic
4.1 What is the difference between the actual length and the standard length? We shall use the specification of 2.3.1.1 in GB, T17421.[—1998] 4.1.2 Geometric accuracy inspection See 3.
4.2T test.TB/T1 150-1999. The plane of the installation surface is also inspected. The surface of the 30D measuring plate is increased by 3 meters for each increase of us<m. Before 300 meters, the length of the measuring plate should be increased by 3 meters.
Installation surface; accuracy 1: 0.12
Every 300
Add 0.01
Yongping instrument
Indicator
Test method
According to the special exemption of GR/T174211-1998
, place a horizontal diameter suction cup on it, and move it once to verify the horizontal setting reading. Through the OAC base plane, based on the assumption of a good level, the coordinate values ​​of each measured surface are calculated inversely. The error between the points on the plane and the base plane is the recommended value. This work can also be tested by other equivalent force methods. 5.4.3.2.2 Turn the disk to the indicating point on the operation board and the table surface, and move the indicating bottle on the stop board for inspection: the error is based on the maximum position of the indicating reading. The working environment is 110V. When there are special requirements, other standard voltage values ​​are also allowed. 4.3 Appearance
4.3.1 The magnetic poles should be arranged neatly and evenly, and the working surface should not have cracks, rust, holes, pits, burrs and other defects that affect the performance and appearance.
4.3.2 The maximum allowable value of the surface roughness R of the suction cup installation surface is 0.B, and the maximum allowable value of the surface roughness R of the suction cup table is 1.25
4.4 Structure
4.4.1 The lead-out wire of the sucker should have good sealing, absolutely resistant to boiling and recovery. Measures for breaking: 4.4.2 The lead-out wire connection should have good anti-falling measures 4.4.3 The heavy-duty sucker should have a lifting device.
4.5 Main performance
JB/T10t50-1999
4. 5. 1 The suction force of the sucker table has no suction force unevenness and should meet the requirements of Table 4. Table 4 Suction force and suction unevenness of suction cup
Suction type
Concentration. min
Allow 10% of the points to be measured are
Allow 10% of the points to be measured are 60
.5.2 Suction force is not greater than the force at this point! 4. 5. 3
Suction uniformity, max
Suction cup is used to evaluate the displacement of the specimen under a constant static load of 0, and it meets the requirements of Table 5. Table 5 Suction cup stiffness
Suction cup surface or diameter Www.bzxZ.net
>3J5~630
4. 6 Gas performance
4. 6. 1 Temperature rise
Static value
Under rated load for 6h, the voltage of the suction cup surface shall not be greater than 25% or the line temperature rise shall not be greater than 5 4.6.2 Insulation resistance
The insulation resistance between the suction cup body and the power supply input shall not be less than 5M. 4.6.3 Electrical resistance
During the electrical withstand test between the live parts and components of the suction cup, surface flashover and insulation breakdown shall not be caused. 4.6.4 Anti-floating water impact
The anti-expansion level of the suction cup light body should reach 1PX7 level, and the insulation resistance after water extraction should not be less than 5M gate 4.6.3 Continuity of the protection circuit
The continuity of the protective grounding circuit should comply with 8.2 of GB/T5226.1-1996.3 provisions, 5 test methods
suction cup table suction, uneven suction and sharp magnetic test should be carried out in accordance with the provisions of Table 6. Fill in the table
JBIT10150-(999
Table 6 suction, uneven suction sentence, magnetic test sign diagram
minus: the provisions of the test block according to GD/T, 14534-1993 Appendix A. Inspector
10-300030
test method
account plate set on the test table to
lead the electric Service delay electricity. Will be a block across
special war layer suction in Helan 1, knife
gravity also through the steel ring vertical ten
and the direction of the short report of a pull test decision.
suction to the test block to leave the price and when to
i's ​​war Dadong excellent design
stock force nature:
table product big suction and ground
hot old fairy
new electricity 1 Internal suction test, the suction meter when the test block leaves the force can be measured at each two dense layers of a rectangular line with half of its length and length. When the total number of points exceeds 60 points, the average point of the two lines is measured, and the total number of points is not less than 6. 2. 1.4-120-degree radius of the grid-shaped annular plate surface. 4. 5-9 points are taken from each single plate of the two holes of the same small medicine on the platform. JBF18151-1999 tape The table measurement test age reduction table has a single regulation. Table? Table stiffness test: The test piece is reported to the provisions of G13-1 Appendix 5.3 Temperature rise test test blue I tool cloud instrument set too test bench 1:. To melt the electric cover: the specified position between the fiber optic table (A, B, C points, the two indication rates are equidistant with the small shaft of the war, h points. In the two seasons, in the test, the average length of the construction, take, the arithmetic mean of the point indication position: the same method of acoustic inspection, the platform will be the most
point between the two inspection points. 5.3.1 The temperature rise of the suction cup shall comply with the provisions of 82.22 of B/11497-1085. After 6 hours of reverse current under the predetermined voltage, the temperature difference between any point of the suction cup and the surrounding air temperature shall be measured by point excitation. 5.3.1 The temperature rise of the wire shall comply with the provisions of 5.3.1 of GB/98-1982. The temperature rise of the wire with an insulating layer shall be measured by the insulation layer. For the calculation method of the temperature rise of the wire, please refer to Appendix C of GB/998-1982. 5.4 The insulation resistance test shall comply with the provisions of 16.2 of CB/998-1982. The image resistance between the suction cup lead wire and the optical body shall be measured with a 500V meter. 5.5 The insulation resistance test box is suitable for
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.