GB/T 3752.1-1983 Compression-type right-angle pipe joints
Basic Information
Standard ID:
GB/T 3752.1-1983
Standard Name: Compression-type right-angle pipe joints
Chinese Name:
卡套式组合直角管接头
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-06-17
Date of Implementation:1984-04-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
This standard specifies the ferrule type combined right angle pipe joints, which are suitable for pipeline systems of oil, gas and general corrosive media. GB/T 3752.1-1983 ferrule type combined right angle pipe joints GB/T3752.1-1983 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Compression-type combined right-angle pipe joint
Adjustable elbow-Assembly
UDC621.643.4
GB3T52.1—83
This standard specifies the compression-type combined right-angle pipe joint, which is suitable for piping systems of oil, gas and general corrosive media. SbZxz.net
GB3750-83
GB 3752.2-83
G3764—83
Marking example:
Nominal pressure J level, pipe outer diameter D. is 14mm, lower sleeve type combined right angle pipe joint: pipe joint J14GB 3752.1—83
National Bureau of Standards 1983-06-17 Issued
1984-04-01 Implementation
Nominal pressure
(bar)
Pipe outer diameter
GB3752.183
Specific gravity is 7.85kg/dm3.
Note: weight is calculated value,
Technical conditions are in accordance with GB3765—83. Additional Notes:
Wrench Size
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry. er
(kg/100 pieces)
This standard was drafted by the Standardization Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery!, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the Seventh and Eighth Institutes of the Aviation Department. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Tu Muqin. From the date of implementation of this standard, the original ministry standard JB195877 "Combined Right Angle Pipe Joints with Compression Sleeves" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.