title>SY 6505-2000 Regulations on the coloring of shallow-water petroleum facilities - SY 6505-2000 - Chinese standardNet - bzxz.net
Home > SY > SY 6505-2000 Regulations on the coloring of shallow-water petroleum facilities
SY 6505-2000 Regulations on the coloring of shallow-water petroleum facilities

Basic Information

Standard ID: SY 6505-2000

Standard Name: Regulations on the coloring of shallow-water petroleum facilities

Chinese Name: 浅海石油设施涂色规定

Standard category:Oil and gas industry standards (SY)

state:in force

Date of Release2000-12-12

Date of Implementation:2001-06-01

standard classification number

Standard ICS number:Environmental protection, health and safety >> 13.100 Occupational safety, industrial hygiene

Standard Classification Number:Petroleum>>Petroleum General>>E09 Health, Safety, Labor Protection

associated standards

Publication information

other information

Introduction to standards:

SY 6505-2000 Shallow Sea Petroleum Facilities Coloring RegulationsSY6505-2000 Standard download decompression password: www.bzxz.net

Some standard content:

ICS 13.100
Registration No.: 8127--2001
Petroleum and Natural Gas Industry Standard of the People's Republic of China SY 6505-2000
The provisions for outside surface colorof shallow water facilities
Issued on December 12, 2000
State Administration of Petroleum and Chemical Industry
Implementation on June 1, 2001
SY 65052000
Cited Standards
General Provisions
Main Body of the Facility
Buildings
....................
SY 6505-200Mwww.bzxz.net
5.4 and Chapter 8 of this standard are recommended, and the rest are mandatory. This standard is formulated to standardize the color of the outer surface of shallow-water oil facilities and their various equipment, containers, pipelines, etc., to facilitate identification by operators, prevent misoperation, and prevent or avoid accidents. In terms of content setting, this standard mainly includes the coloring requirements of the shallow-water oil facilities and the equipment, containers, pipelines, structures, etc. installed on them: the coloring requirements of fire-fighting equipment, life-saving equipment, safety signs, warnings, navigation aids and numbers installed on the facilities are not listed in this standard and should be implemented in accordance with the provisions of existing national standards; this standard does not apply to the coloring requirements of shallow-water oil-specific ships.
After the release and implementation of this standard, when the mobile Shishan facilities in use enter the factory for repair and the fixed oil facilities are overhauled, this standard should be implemented.
This standard is proposed by China National Petroleum Corporation. The content of this standard is under the jurisdiction of the Petroleum Industry Safety Professional Standardization Technical Committee. The drafting units of this standard: Safety and Environmental Protection Department and Technical Supervision Department of Shengli Petroleum Administration. The main drafters of this standard are Ren Qinghe, Lu Shihong, Lv Mingtun, Ren Qiang and Yang Hongxu. 1. Scope
Petroleum and natural gas industry standard of the People's Republic of China Provisions for outer surface color of shallow water facilities
The provisions for outer surface color of shallow water facilities This standard specifies the requirements for outer surface color of shallow water facilities and their various equipment, containers, pipelines, etc. This standard applies to shallow water petroleum facilities:
2. Referenced standards
SY6505—2000
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. All parties using this standard should explore the possibility of using the latest versions of the following standards. GB2893—1982 Safety colors
3 General provisions
3.1 The color samples of the coloring shall comply with the requirements of (B2893, 3.2 After the equipment, containers, pipelines, etc. are wrapped and insulated, their outer surface color shall be consistent with the color specified in this standard.
3.3 The paint used for coloring shall have a product approval certificate from the issuing inspection agency. 3.4 Equipment, containers, pipelines, etc. not covered by this standard shall choose a contrasting color according to the installation area and location. 4 The main body of the facility
4.1 The soil color of the mobile drilling, oil production, and operating platform shall be painted gray. 4.2 The main body of the fixed oil production platform shall be painted red: 4.3 The main deck surface shall be painted light green,
5 Equipment
5.1, Drilling equipment
5.1.1 The following equipment shall be painted red: || tt||a) Overhead crane:
b) Hydraulic (pneumatic) tongs;
e) Kelly spinner;
d) Air bag and safety valve of drilling pump:
e) Plate control device and its manifold and auxiliary equipment and well control room:) Hydraulic pipe system:
5.1.2 The following equipment shall be painted yellow:
a) Traveling slide;
b) Big hook;||t t||c) Water tap:
Approved by the State Administration of Petroleum and Chemical Industry on December 12, 2000 and implemented on June 1, 2001
d) Top drive device;
e) Gas (electric) winch;
f) Agitator reduction box and motor shield;g) Vibrating screen;
h) Desander;
i) Desilter;
j) Degasser.
5.1.3 The following equipment should be painted gray:
a) Derrick;
b) Linkage machine, shield.
5.1.4 The following equipment should be painted light blue:
a) Drilling winch, rotary table and chain shield;b) Drilling pump.
5.2 Downhole operation equipment
5.2.1 The color of the workover derrick should be painted white. 5.2.2 The color of the workover rig should be painted gray. 5.2.3 Other equipment should meet the requirements of 5.1. 5.3 Oil and water (gas) well gathering and transportation equipment
SY6505--2000
5.3.1 The appearance color of the wellhead device should be determined by the unit, among which the wellhead device of the oil production well should be painted gray; the water injection wellhead should be painted green; the gas production wellhead should be painted yellow, and the hand wheel on the gate should be painted red. 5.3.2 The surface color of the heating furnace and the heat medium furnace should be painted silver-white. 5.4 General equipment
5.4.1 The color of the main and auxiliary diesel engine bodies should be yellow, the base should be black, and the exhaust pipe should be silver-white. 5.4.2
The color of the main and auxiliary generator sets and the base should be gray. The surface color of the boiler should be silvery white.
The color of the air compressor should be gray.
The color of the ventilation device should be gray, and the impeller should be red. The color of the hydraulic lifting device should be gray. The color of the boat lifting machine should be gray.
Lifting equipment should be painted according to the following requirements:
a) The crane body and the boom should be yellow;
b) The eye-catching ball of the small hook should be red.
5.4.9 The crane equipment should be painted according to the following requirements: a) The main body of the anchor machine should be gray;
b) The anchor head and anchor chain should be black.
5.4.10 Pump equipment should be painted in accordance with the following requirements: a) The color of the fresh water pump, seawater pump, and bilge pump body is green; b) The color of the hydraulic pump, fuel pump, and lubricating oil pump is yellow; c) The color of the crude oil pump is gray;
d) The color of the natural gas delivery pump is yellow;
e) The color of the coupling and shield of various pumps is red. 5.4.11 The color of anti-pollution equipment should be green. 2
6 Containers
SY6505—2000
The color of containers containing various media should comply with the provisions of Table 1. Table 1 Container coloring requirements
Container name
Crude oil tank
Diesel tank
Heat transfer oil tank
Fresh water tank
Crude oil settling tank
Sewage oil tank
Separator
Soil powder, weighting agent, bulk cement storage tanksHydraulic oil tank, lubricating oil tank
Chemical agent tank
The coloring of pipelines transporting various media shall comply with the provisions of Table 2Pipeline coloring requirements
Pipeline name
Crude oil pipeline
Natural gas pipeline
Diesel pipeline
Heat transfer oil pipeline
Steam pipeline||t t||Compressed air pipeline
Fresh water pipeline
Water injection pipeline
Sewage oil pipeline
Drilling fluid high (low) pressure pipeline
Safety vent pipeline
Lubricating oil pipeline
Chemical agent pipeline
Hydraulic control pipeline
Fire water pipeline
Surface color
Silver white
Silver white
Orange red
Surface color
Silver white
Silver white
Light blue
Orange red
8Structures
SY 6505—2000
8.1 Various supports, handrails and ladders should be painted green. 8.2 The color of the guardrail should match the color of the soil. 8.3 The torch body should be painted orange.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.