Some standard content:
ICS.21.060.10
National Standard of the People's Republic of China
GB/T57852000
exlySoB765:1999
Hexagon hcad bolts with finc pitch thread2000-09-26issued
2001-02-D1implemented
issued by the State Administration of Quality and Technical Supervision
GR/T 57852000
This standard is equivalent to Shenzhen International Standard 1S08765.1999% Hexagon head bolts metric large product grades A and B. This standard is a part of the national standard "Hexagonal fasteners" product design standard. This series includes: A hexagonal fasteners: GB/T 7, GB/T 28, GB/T 2.1, (B/T 25.2, G/T 31.1, G/T 31.2. GR/T 3I.A, GN/T 32.1. G/T 12.2. G/T A2.3. G1/T 6789, G1/T :7E1. GR/T 6782. GR/T 5783.GR/T5784.G.3/T5766G5/T5783
b7 Hexagonal nut.GB/T41,GB/T56GB/T8U3.GB/T8(4.GB/T&C5CB/T858, GB/T889.1.CE/T889.2,GB/TU28..GJ/T6170,CB/Te17-,GB/T 6172.1,CH/T6:72.2,GH/T 6173.G/T6174.GB/T6175.GB/T617S.C1/T6178.UB/T6179.GH/Te18C.GB/T6181.GB/16IR2.GB/1 6184,GR/T6185.1,GB/T6185.2.GB/T5185.GB/T94S7,GB/T945R,GB/9159MGB/T 18195:
C) Angle flange and cigarette plug:G:T/T5789.GB/T79C and GN/T15674d) Six-phase emergency method commercial mother.B/T$177.1GR/5177.2GR/T6183.1,$B/T6183.2, GB/6187.1 and GB/T 6187. 2;
C) Ge Yuejie uniform monthly width connection pair:GB/T1228.GB/T122U, GB/T7230, CB/T3632, GB/T15339CB/T 1823C.:,CE/T 18230.2.,GB/T 18230.3.G1/I 18230.4.CI/! 15230.5,GB/1 18233.3GB/T 1623G.7;
f) Hexagonal climbing nails, wood nails, body tapping screws and assemblies, GB/T838, GB/T102, G5/T5285, GH/T6iGR, GB/TS456, GE/T1:A5G.4, G/T1824.1, GB/T 16821.2, GB/T 9074.1:.GR/TSC74-12.GB,T 0074.13.GRT 90T4-14,GR/T 9074.15,G5T 9074.16,G,T $074.17.GH/T 9074. 20.GB/T (4.21,GH/T UU74.22 GR/T 9 (4.23,IS08755) does not specify the packaging technical requirements, and the standard is based on the provisions (Table 3). IS03%5 standard is simplified, this standard is simplified according to GB/T27 simplified original just put forward the simplified marking 5.2!. This standard is a revision of GB/T 57851986, with the following major changes: a) two length specifications listed in Table 1 and Table 2; b) the degree of improvement of the method for the final optimization: Table 1: the optimization specifications (sample 1 should be noted in Table 1 and Table 2; Table 2: the optimization specifications (the values in Table 31 of the standard M20×1 are listed in Table 1 and Table 21); e) add 5.6 grade; d) add non-ferrous metal screws, the supply and demand parties shall agree on the best grade (Table 3); e) add powder microlayer (Table 3). This standard shall replace GB/T 5735198% from the date of implementation. This standard was proposed by the State Administration of Machinery Testing. This standard was approved by the National Quality Control and Standardization Technology Committee, and the standard was supported by the China Academy of Mechanical Science. Beijing Standard Parts Industry Group, Shanghai Screw Needle Factory, Biyang Standard Parts Manufacturing Factory and Zhejiang Xinggao High Strength Case Factory participated in the drafting. The National Quality Control and Standardization Technical Committee Secretariat of the ISO Foreword ISD (International Organization for Standardization) is a world-wide national standard ISO is a cooperative organization that is composed of standard bodies (ISO member bodies). The work of preparing international standards is carried out through various technical committees. Each member body is interested in the work carried out by a technical committee - ISO may participate in the committee. International organizations, governmental and non-governmental, with an interest in ISO may also participate in the work. ISO has a close joint project with the International Electrotechnical Commission (IEC) in the field of electrotechnical standards. The drafting of international standards shall be carried out in accordance with the rules given in Part 3 of the ISO Directives. The draft international standards adopted by the technical committee shall be returned to the International Standard. Distribution form all or member of the body to achieve the makeup ticket missing. International Standards published in the form of writing less than 75 light group bed technical fee,
International Standard IS875 150/TC.2 Zichen Technical Committee Wind developed the first edition of the first edition (S&: 988) is called a supplement + is a technical revision. ISO
This International Standard is a sub-series of the "six-piece expansion fastener" product series standard: This list includes: a) hexagonal head screws (1S4014--4715 and 15O8765)) Angle nail (01 [S4C and S0:
Angle every 1432403 and 506738675
For flange surface screw inspection () 1162 and 15015071)) Six-dimensional flange surface line 15151 rent 1510663
E) Grid connection drill structure [Flame wheel and dry Chen: IS4775.ISO4117414 and SO7417. 1 Range
National Standard of the People's Republic of China
Large angle head bolt fine thread
Hexago This standard specifies the thread size M×3~MG1×4, fine pitch thread effect, energy difference level 3.5,3.8,9.8,20.3,A27U,A4-70.A2.50.A4-50,CU2,CU3 and AI,4, etc., short A and B hexagonal head holts. Grade A is used for bolts with thread size of 24m or 150m (the smaller value); Grade A is used for bolts with thread size of 24m or 105m (the smaller value).
If other technical requirements are required, they should be selected from the current standards (such as GB/T19G, GB/T3106, GR/T3098.1, GI/T3098.6 and GB/F3:03.1).
The cylinder fatigue properties specified in GB/T5762 should be selected first. 2 Reference standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When the wood standard is published, the versions shown are valid: All standards will be revised. Parties using wood standards should explore the possibility of using the latest versions of the following standards: GR/T219R5 Number of external fasteners per piece (V[S]753.1053) UB/T 90—1985
CE/T196—1981
Exposed fastener inspection, marking and packaging (g1503269:154) Basic dimensions of ordinary screws (diameter 160m)
GB/T 197—1981
GR/T 1237-2000
Tolerances and fits of ordinary beams (diameter ≤-355TIm) Fastener green marking method (ES0899:138) GBT 3098.1—200C
GB/T 3098.6--2C60
Mechanical properties of fasteners frequency bolts, screws and strength (idtS0998-1.1399) Mechanical properties of fasteners stainless steel screw inspection, Xu and Hu Du [ul[S]304-1:1997)
B/T30S8.20199J Fasteners Mechanical properties of bolts, nails, washers and nuts made of metal (ege130 3839.1986)
GB/3103.1-1982 (confirmed in 1988) Nominal length of bolts, screws and screws and effective length of ordinary screws (ESO81976)
GB/T267-1985
Smoke parts electrical insulation layer
GB/T5276-1985 No. ... 000
Purple parts surface feeding embedded state specification, screw lamp and Na will have special requirements (2150) 157-2933) GB/5782-2 (00 square head screw thread (eI5010141990) G/T786.-2000 six head bolt standard tooth residual burst pattern (TS0) 5675:1) GB/T169351997 frequency, operation, channel production General technical specifications (GdTS) 8992: J986) Electrolytic parts
National Quality Supervision Bureau 2000-09-25 approved 2001-02-01 implementation
3 Dimensions
Note: Dimensions and markings are in accordance with GB 5276..1) 7 = 15\~3
2) Meters will be used as an example (G5/12).
3) The length of the course is not valid for 3P
). | |tt |
(lift)[half
S± 95
CB/T5785—2000
sa-aGF
GB/T 5785—2000
sea-ri
GD/T5785
5Roadyard
s'r9tf2
Drink sail
marmeu
umr ren:
+xxtx6E
4\NK4\X?\X2W 2\TXP9
GB/T5785-~2000
55ks'e
Essoe e
Erxn Exewi xaw
'-\\yt
SA-9eb
ss gts 2se
X42NT:x28
S[+$ 1Iar
1 Technical conditions and referenced standards
General resistance to technical requirements
Mechanical
Surface treatment
Collection and installation
5 Marking
Products, etc.
5.1 The marking method shall be in accordance with GB/T1237.
5.2 Marking example
CE/T585—2000
Table 3 Technical conditions and referenced standards
Not enough
GB/T :69K
GB/T 19A,CH/T 197
3.6.SS10. 9
mm16m：9.a
4>39mm：做没
GB/T 3056.1
d39！ A2-F0, Aq-73 A2-E0. A4-50 D-39 ran: according to the agreement G3/T $08B, 6 9: pull agreement non-ferrous metals CU2. CU3. AL GB/T 3U9s.10 4m and 1150 values are smaller G/F31C3.1 (+/1 5771.1.C:/ 5779-3
There is a single treatment
The single puller in the middle must be connected to GT257.
Technical requirements SOOB
If other clothing is required, the surface treatment is completed by the agreement between the supply and demand parties GE/T 9G
Business order processing
Screw effect specification d=M12×1., nominal bottom/=n11m, fine tooth explosion effect, excellent grade 9., surface hydrogenation, product grade is human grade, human angle head bolt mark
Specification GB/T5786M12×1.5×302 Marking example
CE/T585—2000
Table 3 Technical conditions and referenced standards
Not enough
GB/T :69K
GB/T 19A,CH/T 197
3.6.SS10. 9
mm16m：9.a
4>39mm：做没
GB/T 3056.1
d39！ A2-F0, Aq-73 A2-E0. A4-50 D-39 ran: according to the agreement G3/T $08B, 6 9: pull agreement non-ferrous metals CU2. CU3. AL GB/T 3U9s.10 4m and 1150 values are smaller G/F31C3.1 (+/1 5771.1.C:/ 5779-3
There is a single treatment
The single puller in the middle must be connected to GT257.
Technical requirements SOOB
If other clothing is required, the surface treatment is completed by the agreement between the supply and demand parties GE/T 9GbzxZ.net
Business order processing
Screw effect specification d=M12×1., nominal bottom/=n11m, fine tooth explosion effect, excellent grade 9., surface hydrogenation, product grade is human grade, human angle head bolt mark
Specification GB/T5786M12×1.5×302 Marking example
CE/T585—2000
Table 3 Technical conditions and referenced standards
Not enough
GB/T :69K
GB/T 19A,CH/T 197
3.6.SS10. 9
mm16m：9.a
4>39mm：做没
GB/T 3056.1
d39！ A2-F0, Aq-73 A2-E0. A4-50 D-39 ran: according to the agreement G3/T $08B, 6 9: pull agreement non-ferrous metals CU2. CU3. AL GB/T 3U9s.10 4m and 1150 values are smaller G/F31C3.1 (+/1 5771.1.C:/ 5779-3
There is a single treatment
The single puller in the middle must be connected to GT257.
Technical requirements SOOB
If other clothing is required, the surface treatment is completed by the agreement between the supply and demand parties GE/T 9G
Business order processing
Screw effect specification d=M12×1., nominal bottom/=n11m, fine tooth explosion effect, excellent grade 9., surface hydrogenation, product grade is human grade, human angle head bolt mark
Specification GB/T5786M12×1.5×30
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.