This standard specifies the model marking, structural type, part type, structural dimensions and materials, technical requirements, test methods, inspection rules, marking, packaging and storage of tubeless compression valves. This standard applies to tubeless tire valves for motorcycles, cars, light trucks, trucks and buses. This standard does not apply to aircraft tire valves. GB 12836.2-2003 Tubeless Valve Part 2: Compression Valve GB12836.2-2003 Standard Download Decompression Password: www.bzxz.net

ICS 83. 160. 99
National Standard of the People's Republic of China
GB12836.2--2003
Tubeless yales
Parl 2 Clamp-in valves
Published on 2003-06-13
National Quality Supervision and Inspection Commission of the People's Republic of China
Revised on 2003-12-01
Article 6.3, 7.2 and some indicators in Chapter 8 of this Part are mandatory, while others are recommended. This part of the product is formulated based on the development status of non-metallic valve media in my country in recent years. The model marking of compressed air valve media in this part refers to ISO 10475:1592. Its structural type refers to IS4131598. It also refers to foreign standards such as National Standard 1[N77811979] and DIN 8527 (1979), TRA Standard (2000), JATMA Yearbook (2(Q)) and ETRTO Standard Manual (273). This part was proposed by the original Chinese Society of Chemical Industry and was formulated by the National Wheel Standardization Technical Committee. This part was entrusted to the National Wheel Standardization Technical Committee for Valve Media Standardization for interpretation. This part is drafted by Hangzhou Wantong Valve Co., Ltd., Nanlv Junli Shenzhen Automobile Co., Ltd., Shandong Valve Factory, Shenyang Rubber Machinery Co., Ltd., and was drafted by Zhu Xiao, Yan Feng, and Liu Qizhong. This part was first published in July 2003. 1 Scope
Tubeless valves
Part 3, Compression valves
CB 12836.22003
12835 This part of the vehicle standard specifies the model, type, parts type, structure size, technical requirements, test methods, inspection, marking, packaging and other aspects of the tubeless compression valve cap (hereinafter referred to as the valve cap) for cars, automobiles, or cars, and relatively weak tires on buses and passenger cars. This part does not apply to aviation tire valve caps: 2 Normative references||tt ||The clauses in the following texts are applicable to this part by reference in this part. In particular, before the date of this part, all subsequent revisions (including incorrect contents) are not applicable to this part. However, it is recommended that the versions of this part be used in accordance with the regulations. For any out-of-date references, the new version shall apply.
GB51996 Dry tire valve core
32-3000:3000 The table of withdrawal sequence and withdrawal rod is applicable to the inspection of selected batches) GB971997 Tire valve core
G!! Tire valve detection pattern
GB/97652UU3 Tire valve environmental test method S1075:152 Marking of tire valves with inner rim and tire valves without inner rim and parts 3 Model marking
3.1 The product model * indication method shall comply with the provisions of 15)11475, 3.2 Marking Example:
The valve body length of 58mm is marked as: inner tube valve end DK05 (3132836.2: The valve body length of Cmm is marked as single valve end, no valve DP11C core B12836.4 structure
The station configuration of the valve end should be in accordance with the provisions of Figure 11 of Xie 1-1, GB12836.2-2003
Yingji seal
valve certificate
GP 1/9
Drainage wheel
Hole light/mm
2 Use case
Lifting car, plastic repair
Car, gas-enhancing car,
Beijing Middle School car
13F11::
1F1-1C
1XQ51E:
1xqot:
Surface dyeing)| |tt||Read the pad
and the Republic
Ar-14, 146
Society: Protective tube according to the state of Guangchang'an choose its type of protection;
Only condition,
4 six embrace,
—gasket
——gradually closed hope:
Medical care situation
IG24: type
015:4 :
TC1 type
GA 795
SR-79E
Figure 1CQ0, C type valve ring
Wuchuan
Help hole meal/m
GA12836.2—2003
Main Sichuan injection
Sedan, plant,
Motorcycle
GE 12836.2-2003
Except for protection;
Air heat:
Six screws:
Pieces:
Dense Village Leather
Sealing:
Figure 2CR04~CR11.DRO4~DR07 type valve mouthFigure 3DR09~DR11 type valve mouth
1Protection;
Air core:
One% you;
Entry angle Frame
Secret month insurance 1
Hexagonal payment;
Shaanxi vehicle:
5 Protection
Figure 4CPO1C~CP05C.P01C~DP10C valve mouthFigure 5LPO1.CP06C,DPC1~TP05P11C~DP14C valve mouthGB12836.2—2003
B12836.2—2003
Protection line!
Our hearts!
Required body:
Six-corner entertainment mother;
Type secretion diagram
Defense teacher:
Air people Zhi,
——Six-corner Ming
5·…-seat film.
Figure 6C007 type valve mouth
CMI03C type valve spray
Protection situation,
One sea,
Six flowers some;
Figure from (M01 type valve end
Protection machine:
One sea discussion
One required seat:
Eight use frequency 4
Move step:
Six doors:
Mouth body:||tt| |Hexagonal nitrogen nut:
Gasket,
Gasket.
CB12836.22003
Figure 9CM02 type valve
Figure 10DQ01 type valve
7312836.2—2003
Precautions:
Gas,
Pollution,
Many screws:
5——From the judgment base,
5Parts type, size material
National 11JH202C: type valve
The side structure size and material of the valve should comply with Table 1~Figure 2
CRn4.- CR11.IRP4 -.\NG3
DRGa·-ERiE
CP:IC-.CPSC.DPR1C--DPIC
CPu:,.PUC,PrI.-DFub.JPIIC.DPICcQwww.bzxz.net
Core trace base
ZA No. B No.
Explosive liquid 10
Surrounding 12CQ08.C03 type mouth body
Cow position for things Meter
Frequency control 5
W control 10V
Figure 13CR04~CR11DR04~DRC7 model number
CR12836,2—2003
Zhongnong Yimi
TR57OC
TR57:C
TR572C
V3-·3
V3-2-2
V3 21
V: 214
V3-21-f
:-21-7
B12836.2—2003
Meitong HV
Spiral effect heart
Change fast 9%
Figure 14I>R0g~DR11 type mouth body
Single age is from meters
DPOSC:
Drcae:
SCPO1C~CPC5C,DPO1C~DP10C type end piece Figure 15
Single should be capsule
71854313
TR5441
TR545n
TR54SE
TH61656
1k5461n
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.