GB 11575-1989 Basic quotas for equipment for marine transport vessel repair
Basic Information
Standard ID:
GB 11575-1989
Standard Name: Basic quotas for equipment for marine transport vessel repair
Chinese Name:
海洋运输船舶机修设备配备基本定额
Standard category:National Standard (GB)
state:Abolished
Date of Release1989-08-10
Date of Implementation:1990-03-01
Date of Expiration:2005-10-14
standard classification number
Standard ICS number:Shipbuilding and offshore structures >> 47.020 Ships and offshore structures, general
Standard Classification Number:Ship>>Ship General>>U11 Ship Theory and Ship Model Test
associated standards
Procurement status:≈JIS F 901-78
Publication information
publishing house:China Standards Press
other information
Review date:2004-10-14
drafter:Guo Baozhen, Wu Xiansheng
Drafting unit:Shanghai Ship Design and Research Institute
Focal point unit:Shanghai Ship Research and Design Institute
Proposing unit:China State Shipbuilding Corporation
Publishing department:State Bureau of Technical Supervision
competent authority:China State Shipbuilding Corporation
Introduction to standards:
This standard specifies the basic quota of mechanical equipment for the maintenance and repair of diesel engine power units on ocean transport vessels. This standard applies to ocean transport vessels with a rated power of 290~15000kW and a deadweight of 300~65000t. GB 11575-1989 Basic quota of mechanical equipment for ocean transport vessels GB11575-1989 Standard download decompression password: www.bzxz.net
Some standard content:
UDC629.123.5:627.435
National Standard of the People's Republic of China
GB 1157589
Basic quota of machine tools facility andoutfits for the machinery of ships1989-08-10Promulgated
Implementation on 1990-03-01
State Bureau of Technical Supervision
National Standard of the People's Republic of China
Basic quota of machine tools facility andoutfits for the machinery of shipsSubject content and scope of application
GB 11575.·89
This standard specifies the basic quota of machine tools facility andoutfits for the machinery of ships for repair and maintenance services of diesel engine power units of offshore vessels. This standard applies to ocean transport vessels with rated main engine power of 290~15000kW and load capacity of 300~65000r. 2 Equipment quota for mechanical repair (see the table below)
Rated power
Load sensitivity
Approved by the State Administration of Technical Supervision on August 10, 1989 Name
Grinding machine
Electric welding plate
Main specifications
Center height
Center distance
2×150mmWww.bzxZ.net
2×200mm
42--320 A
Electric motor
Can also be combined
(universal) machine tool
Replace lathe and drill
1990-03-01Actual
Rated power
100nsg
.15000
Additional instructions:
Load capacity
7500sm
65 000
?500sLh
65 000
GB11575-89
Main specifications
Electric welding machine
Central supplier
Central supplier
Integrated type
Gas welding machine
Operation management Kai
This standard is proposed by China Shipping Corporation. This standard is under the jurisdiction of Shanghai Ship Research and Design Institute. Rongsheng
This standard was drafted by Shanghai Ship Research and Design Institute. The main drafters of this standard are Guo Baozhen and Wu Xianzhen. 1amm
2×200mm
1500mm
42~320A
2 acetylene 48,
2 bottles-bottle gas
40L, 4 bottles
D232-65
motor
This standard mainly refers to the adoption of the imported standard JISF0901-78 to increase the standard number of equipment and equipment. Combination (universal) machine tools can also be used to replace lathes and posts. The equipment is determined according to the user's requirements. 230000t transport
1 foreign ship front equipment
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.