GB/T 3756.1-1983 Compression-type straight pipe joints
Basic Information
Standard ID:
GB/T 3756.1-1983
Standard Name: Compression-type straight pipe joints
Chinese Name:
卡套式对接直通管接头
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-06-17
Date of Implementation:1984-04-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
This standard specifies the ferrule type butt joints, which are suitable for pipeline systems of oil, gas and general corrosive media. GB/T 3756.1-1983 ferrule type butt joints GB/T3756.1-1983 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Union for butt joints-Assembly
UDC621.643.4
GB 3756.1—83
This standard specifies the ferrule butt joints, which are suitable for pipeline systems of oil, gas and general corrosive media. S
GB3756.2—83
GB376083
GB3764—89
GB3761-83
Marking example:
Nominal pressure level, ferrule type straight pipe joint with pipe outer diameter D of 14mm: Pipe joint J14GB3756.1-83
National Bureau of Standards 198306-17 Issued
1984-04-01 Implementation
Nominal pressureWww.bzxZ.net
(bar)
Pipe outer diameter
Note: The weight is a calculated value, and the specific gravity is 7.85kg/dm. The technical conditions are in accordance with the provisions of GB3765-83. Additional Notes:
GB 3756.1—83
Size of wrench
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and approved by the Standardization Research Institute of the Ministry of Machinery Industry. e
(kg/100 pieces)
This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery!, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai Electromechanical Science and Technology Information Institute, and the Seventh and Eighth Institutes of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin. From the date of implementation of this standard, the original Ministry standard JB1961-77 "Cut-type Butt Straight Pipe Fittings" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.