JB/T 9162.12-1999 Dimensions of set nuts with fine pitch
Basic Information
Standard ID:
JB/T 9162.12-1999
Standard Name: Dimensions of set nuts with fine pitch
Chinese Name:
紧定细牙螺母 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.12-1999 JB/T 9162.12-1999 Dimensions of set fine pitch nuts JB/T9162.12-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Kaurled clamping nuts with inethreadDimeatiansbZxz.net
This standard specifies the types and sizes of set and unthreaded nuts. Plastic type and size
Pregnant type and size are as shown in the figure and the regulations
±M24×1.5,M30×1 5
M12x125
M20×15
M24×1.s
M30× 1.5
Approved by the State Machinery Industry Bureau on May 20, 199914
JB/79162.12-1999
2HF44(1.12-87
2000-01-01implemented
Marking example:
JB/T9162.12—1999
r-M30×1.5 type 1 set fine thread end female marking screw AM30×5
B/9162.J2--1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.