JB/T 8783.2-1998 This standard is a revision of ZB J62 008-87 "Double-disc Friction Brick Press Types and Basic Parameters". This standard specifies the types and basic parameters of friction brick presses. This standard applies to friction brick presses with two types of internal brick discharge and external brick discharge for refractory brick making, and also applies to composite brick presses with hydraulic pre-pressing. JB/T 8783.2-1998 Friction Brick Press Types and Basic Parameters JB/T8783.2-1998 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T8783.2-1998
Friction Brick Press
Type and Basic Parameters
1998-07-17 Issued
: National and Mongolian Machinery Industry Bureau
1998-12-01 Implementation
JB/T8783.2--1998
This standard is a revision of ZB36200S876 Shuangyiku banned brick press room type and basic parameters>, and the major technical contents are different from the original standard as follows:
The name is collected as rate-moving type brick press and basic parameters, and the basic parameters of combined brick press are added;
It follows the R5 system of the advanced numerical control system, retains the specifications of nominal force 630kN, 100)kN, 1600kN, 2500kN, 400kN, 63CGkN and 1000CkN, and adds the specifications of nominal force 1e000kN and 25000kN; cancels the specifications of nominal force 3150kN, 5000kN and 8000kN, and replaces the brick-discharging method of the machine-discharging brick-breaking machine. This standard will replace ZBJ6208-87 from the date of entry into force. This standard is issued and managed by the National Forging Machinery Standardization Technical Committee. The originator of this standard is Liaoyang Yinzhou Machine Tool Co., Ltd. The main author of this standard is Bai Jingjun.
This standard was first issued in April 1987.
Machinery Industry Standard of the People's Republic of China
Friction Brick Press
Type and Basic Parameters
The standard specifies the type and technical parameters of friction brick press. JR/T8783.2—1998
28Ju?
This standard is applicable to the friction type brick press with bricks discharged from the machine and bricks discharged from the machine by fire. It is also applicable to the compound brick press with hydraulic pressure (hereinafter referred to as the standard).
2 Brick press with bricks discharged from the machine
2.1 The schematic diagram of the press with bricks discharged from the machine is shown in Figure 1.1
3.2 The basic numerical values ​​of the single-span pressure-breaking method are determined by the National Bureau of Machinery Standards and Industry. Approved by the State Administration of Machinery Standards and Industry on December 1, 1998
Nominal P
Maximum force P
Change process 5
Process efficiency
Scope of application
Workbench
Work. Table
Effective size
3 Machine outgoing brick type silicon press
JB/T8783.2—-1998
Internal brick type brick press Basic parameters
Batch outgoing brick plastic press type reference Figure 2. 3.1
1 Transmission refers to the image belt,
JB/T8783.2—J998
3. 2. The basic performance of the brick press machine is in accordance with the provisions of Table 2. 2. Basic data of the brick press machine
Nominal force
Block operation S
Operation times
Degree
Mountain stroke
Working table size:
Combined brick press
4.1 Compound press type is more according to Figure 3,
Operation: Supervision needs to be written. The structure is not limited by the technical drawing
JB /T8283.2—1908
4.2 Basic parameters of compound brick presses are specified in Table 3. Table 3 Basic parameters of compound brick presses
Pressure P
Maximum force.
Slider stroke 5
Rational number
Loading output
Brick force
Brick stroke
Working table sizewwW.bzxz.Net
About the output of the cylinder
Vacuum system vacuum history
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.