SJ 1.6-1987 Regulations and requirements for the formulation and revision of technical standards for the electronics industry. Procedures and regulations for the approval of technical standards for the electronics industry. SJ1.6-1987 standard download decompression password: www.bzxz.net

Ministry of Electronics Industry of the People's Republic of China Ministry of Electronics Industry Standards for the Formulation and Revision of Electronic Industry Technical Standards
Related Regulations and Requirements
Procedures and Regulations for the Submission of Electronic Industry Technical Standards This standard specifies the work requirements and procedures for the submission of electronic industry technical standards for approval. SJ1.6—87
This standard applies to the submission of national standards, national military standards, professional standards (ministerial standards) and ministerial guiding technical documents in the electronic industry technical standards.
Referenced standards:
GB1.2 Guidelines for standardization work Provisions on publication and printing of standards GJB0.1 Provisions on publication and printing of national military standards SJ1.7 Provisions and requirements for the formulation and revision of technical standards for the electronic industry Requirements for the completeness of materials when submitting a draft standard (draft for approval) for approval
SJ1.11 Provisions and requirements for the formulation and revision of technical standards for the electronic industry Requirements for the content of a draft standard (draft for approval) for approval report
3 The standard approval procedure is as follows:
Sponsor
Organize the draft standard
Submit a complete report
(draft for approval) and other approval materials
Related materials
Submit the draft standard for approval
Professional standardization
Technical committee
The secretary of the department reviews and signs. After signing, return to the Ministry of Standardization Research Institute for approval procedures. National standards. Professional standards. National military standards. Approved by the Ministry of Electronics Industry of the People's Republic of China on November 10, 1987. Ministry of Electronics Industry, for approval and release. Or reported to the Ministry of Electronics Industry for approval and release. Given a number, released or implemented on January 1, 1988. SJ1.6—87. Note: Projects sent to the professional standardization technical committee for review and signature refer to national standards, national military standards and professional standard projects for which professional standardization technical committees have been established and are under the unified management.
4 The main drafter of the sponsor shall fill in the "Approval Signature Form of the Sponsor of Electronic Industry Technical Standards" [format as Appendix A (Supplement)] and sign it, and after the standardization review of the sponsor, the technical person in charge shall review and sign it, and handle the official approval report document of the sponsor submitting the draft standard (draft for approval) (written in accordance with the requirements of SJ1.11), attach the full set of information required by the completeness requirements of SJ1.7, and submit it according to the procedures specified in Chapter 3. 5 The "Approval Signature Form of the Sponsor of Electronic Industry Technical Standards" shall be attached to the cover of the draft standard (draft for approval), and the number of copies is as follows:
National Standards
National Military Standards
Professional (Ministry) Standards
Ministry Guiding Technical Documents
2 copies;
2 copies;
1 copy;
1 copy.
In the text of the draft standard (draft for approval), there should be a text that meets the requirements for the publication and printing of relevant standards: national standards, professional (departmental) standards and departmental guiding technical documents should meet the requirements specified in GB1,2; national military standards should meet the requirements specified in GJB0.1.
6 The main drafter of the sponsoring unit should fill in a "Standard Information Printing Signature Form" [format according to Appendix B (Supplementary)] and paste it on the cover of the text for printing and publishing. 7 The sponsoring unit and the main drafter of the standard shall be responsible for the scientificity, completeness, advancement, correctness, mutual coordination, economic rationality and text quality of the content of the standard, and shall submit the corresponding information in accordance with the requirements for the completeness of the approval information of various standards. Each link in the approval procedure should also focus on the review of the above-mentioned relevant contents. If it is found that it does not meet or does not meet the relevant regulations and requirements, it should be returned in turn according to the reverse procedure specified in Chapter 3 above, and the sponsoring unit shall make necessary modifications or supplements. However, there should be sufficient basis and clear requirements for rejection. After the sponsor reorganizes the manuscript according to the requirements, it should be submitted according to the original procedure.
8 When the Ministry of Standardization Institute conducts the review, the professional reviewer should fill in the "Electronic Industry Technical Standard Review and Approval Signature Form" [the format is in Appendix C (Supplementary)] and paste it on the text with "Electronic Industry Technical Standard Sponsor Approval Signature Form". It should be submitted after the review is carried out according to the prescribed procedures. 9 The Ministry of Standardization Institute is responsible for the filing and publication of the standards approved and issued by the Ministry. At the same time, the standards approved and issued by the National Bureau of Standards and the Commission of Science, Technology and Industry for National Defense should also be filed in the institute. .2:
SJ1 .6—87
Appendix A
Format of the approval and signature form of the sponsor of the electronic industry technical standard (supplement)
Format of the approval and signature form of the sponsor of the electronic industry technical standard Standard name
Standard number
Project plan code
Sponsor
Deputy sponsor
Main drafter
Sponsor:
Standardization review
Technical person in charge
Standard name
Standard number
SJ1.6— 87
Appendix B
Format of Signature Sheet for Printing of Standard Materialswww.bzxz.net
(Supplement)
Format of Signature Sheet for Printing of Standard Materials
Number of copies printed: Suggestions
Sponsor
Main Drafting Person:
Ministry of Standardization Research Institute:
Professional Reviewer
Technical Person in Charge
Approval Number and Date
SJ1.6—87
Appendix C
Format of Signature Sheet for Review and Approval of Technical Standards for Electronic Industry (Supplement)
Electronic Industry Technical Standard Review and Approval Signature Form Standard Name
Standard Number
Project Plan Code
Sponsor
Deputy Sponsor
Ministry of Standardization Research Institute:
Professional Review Undertaken by
Professional Office Director
Technical Person in Charge
Approval Number, Date
Additional Notes:
SJ1.6—87
This standard was drafted by the Standard and Quality Department and the Standardization Research Institute of the Ministry of Electronics Industry.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.