This standard specifies the classification and naming, requirements, test methods, inspection rules and marking, packaging, transportation and storage of paper clips. This standard applies to metal paper clips of various specifications. QB/T 1149-2005 Paper Clip QB/T1149-2005 Standard download decompression password: www.bzxz.net

1CS 97180
English number: Y54
Army number: 15706-2005wwW.bzxz.Net
Light Industry Standard of the People's Republic of China
QB/11492005
QR/Door 11-4191991
Paper clip
2005-03-19 Release
National Development and Reform Commission of the People's Republic of China 2005-09-01 Implementation
In the standard for 0B/114-1991 back color let's design. Standard No. QB1149-1991, +The following are the differences: Modified the product outer size
a) The basic reflections on the H wire diameter in the original specification 1, table 2, and table 3 were modified: QB/T1149-2005
5) The standard or standard table 1, table 2 has been modified to the maximum head height of 0.5mtl. The original standard 4.1 has been modified to change the time for the design of the head height to the maximum head height of 0.5mtl. The original standard 3.3 has been cancelled for the requirements of materials: - The items of batch inspection have been adjusted, and the inspection methods have been changed to AQ. (Table 5) The defects of shape control, light resistance, rust resistance and other standards have been classified as Class B defects, and the rest are listed as Class C defects. The China Education Industry Federation promotes this standard. The National Sports Supplies Standardization Center of Sichuan Province is responsible for the production of new sports supplies. The responsible products are: Shanghai Ruiduan Teguang Lv Stationery Co., Ltd., Sanhai Olindan Stationery Co., Ltd., Shanghai Eye Products Sales Co., Ltd., Xiner Dada Stationery Co., Ltd., Xinjiang Wuyi Longkanbei Stationery Co., Ltd., Hujiang Housuo Office Supplies Co., Ltd., Guangming Wenzhou County! Participants in the development of this standard: Zhang Zhuo. This standard was first issued in June 1999, and this is the first time to be specified. This standard replaces the light industry standard QB/T 1149-2005 issued by the former Ministry of Light Industry. It specifies the classification and naming, requirements, test methods, inspection planning and marking, production and storage of paper clips. This standard specifies the specifications of paper clips of various disciplines. 2 Regulatory references The following documents are not standard or are not standard. If the following documents are not standard or are not standard, the following documents are not standard (without code mark) or are revised: However, all parties involved in the implementation of this standard are encouraged to study whether the latest versions of these documents can be used. If the reference is not standard, the latest version is applicable to this standard. GB191-2000 Packaging storage and delivery graphic labeling GB/T282R.1-2003 Counting sampling inspection program Part 1: Batch sampling plan for acceptance (AQL) inspection QB/3826-1999 Light industry product gold coating and chemical treatment layer corrosion resistance test method (S) method QB3832-1999 Light industry product quality evaluation test station quality technology bureau [1997] No. 72 product identification and labeling regulations 3 Classification and naming 3.1 Product appearance 1, 2, 3. 3.2 Product appearance and dimensions 1, 2, 3. 3.2 Triangular paper clip 3.3 Product size 1, 2, 3. 3.3 Product size 2, 3.4 Product size 3.5 Product size 4.6 Product size 5.7 Product size 6.8 Product size 7.9 Product size 8.1 Product size 9.2 Product size 10.3 Product size 11.4 Product size 12.5 Product size 13.6 Product size 14.8 Product size 15.9 Product size 16.1 Product size 17. Flat paper clip
QB/T1°492CC5
Specification
Rules and regulations
Round paper clip dimensions
For students
Technical ruler" limit you also ice ruler period difference land point
Not only the hospital will consume the ruler condense the doctor will
Three South paper clip dimensions
Year work head
Hydroxy head age
Technical limit limit difference medical negative Lan
Only the slight limit
Table 3 Flat angle paper clip dimensions
Photography limit difference is not a small nuclear hospital fake difference!
Micro-production requirements can produce non-degradable and non-degradable same-shaped needles 33
Special Liang Lige products in the supplier's agreement, 4 requirements
4.1 Needle body
smooth, flat, parallel to the same line, with obvious marks when adding points, 4.2 Head
Strong or round, obvious.
4.3 Needle feet
Foots are neat, the diameter is not different, and the cut section is almost enough. 4.4 Appearance
Forging should not fall off, stains: color is about the same, and should not be blackened. 4.5 The following is the specification of the 4th table of g/m for the repeated delivery of the product. There is no obvious lengthening after pulling. rn
Single
and limit deviation
4. 6 Rust resistance
Source
Must arrive at the room to cut and other 6 lines
4.7 Small high packaging number
Table 4 Paper clip surface holding performance
QB/T 1149—2005
The most favorable printing paper can be used
Store small packaging only effective recovery packaging quota, exchange rate difference is 1 piece, name science should not be mixed 5 test force method
5.1 Needle peptide 1
Two turns: neat, partial to the shape of the technology to achieve real steel only welcome 5.2, secondary performance
4.5 requirements, monthly plan,
5.3 Rust resistance
According to the standard of 3826-[9, test, spray with the same 15.4 small box packaging only effective
Year small heart packaging only number of teachings test.
5.5 Other items day
6 Inspection soul rules
6.1 Product inspection capital procurement pressure standard batch inspection.
E.2 This appraisal adopts the design of 2:, the sample unit is small book, 6.3 heat test GB/2828.1-20034 special inspection, except for the inspection of half $3 of the sample rate, the sample rate is 6.4 batch inspection of the items required, the whole sample rate and the melting point of the product. 65 times the anti-rust performance, buy! "The highest level of inspection questions for the 4 samples of the World Bank; then the A-level of Table 5 to judge each order qualified and
6. Lightweight technology Q/3832-1999 to make judgment, corrosion resistance pure level 6, that is, the sample is judged to be QB/114S2005
quality product category
actual performance
leading ability
packaging only number
marked, packaging, transportation, storage
7.1 marking
test method
according to the heart to determine the source
there is a fixed production on the packaging! You,! The product weighing, labeling, specifications, quantity, year, net weight, size, factory batch number, etc., as well as marks such as "handle with care" and "prevent overflowing" shall comply with the product identification regulations and the paper marking shall comply with GB/J9-2000.
7.2 Packaging
The packaging structure is reasonable, and the two parties shall make notes before the contract. There shall be inspection certificate in the box (domestic sales). The packaging should be complete and free from damage, moisture, stains and corrosion. 7.3 Transportation
The products shall be kept away from moisture and rain during transportation. Be careful not to overload during transportation and do not overload, so as to prevent the packaging from being scattered. 7.4 Storage
The products shall be stored in a warehouse in a well-connected area and placed on wooden racks. The surface shall be no less than 1000mm and the temperature shall be no less than 10 degrees Celsius. The products shall be stored under the above conditions and the warranty period shall be two days from the time the products leave the factory.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.