GB/T 8593.1-1998 Earth-moving machinery operator control and other display symbols Part 1: General symbols
Some standard content:
ICS_53.100
National Standard of the People's Republic of China
GB/T8593.1—1998
cq Is0 6405. 1:1991
Earth-moving machinery
Symbols for uperator controls and other display- Part 1: Common symbols
Earth-moving machinery --Symbols for uperator controls and other display- Parl 1: Common symbols Issued on June 17, 1998
Implemented on April 1, 1999
Issued by the State Administration of Quality and Technical Supervision
CBT 8593. 1-- 1998
Cited Standards
Template
Use Symbol
Engine Transmission
Transmission System
General
Control System
Fuel
Lighting
Wind No.
Air Conditioning Control
CB/T8593.11998
This Standard is equivalent to 190)64(1:199.8 Machinery--Detection and other display parts: Part 1: Applicable symbols> System.
This certificate will be 7000:189 equipment graphics number - mark verification table 01: square machine code one type one... This language and the correct 418 equipment without the use of the graphic number of the long description and the first related content directly compiled by the standard to promote the market, so in the "month standard pain \ explanation of this change standard, in order to cooperate with the 8 will 1.21 the exchange of machinery and its question display the second part of the machine work equipment as a special symbol, this standard and the first heart single its original number to add 6.17 joint 5.13 late account two symbols. G8 square 8 machinery, machine full plan and degree system line number after non-equivalent use 104533 and set: this standard year comparison standard definition Two chapters, tables are added to the registration, the size of this teacher's school is not unified 1 32, the road year you forget the number of the most into a pen 142, special line number
GF35 includes 1 within the abandoned
Part: Manufacturing and use of common numbers, other steps and general line numbers: Part 2: Machine working equipment back to the special symbols. This part includes the working device of the support, bulldozer, bulldozer, grader, shovel machine working device, digging machine working device, digging back shovel working device, aluminum lifting table, self-printed car rain, loose cover, upper device effect plate, etc.
This standard GB/ T8593.2 From the beginning of the load, the term "659388". This standard is also issued by the Ministry of Construction of the People's Republic of China. This standard is issued by the Ministry of Construction of the People's Republic of China. The Ministry of Construction of the People's Republic of China is responsible for the research and development of new household equipment and the standard for the whole building of vehicles. The Ministry of Machinery Tianjin Engineering Machinery Research Institute, the Ministry of Design Beijing Engineering Research Institute: This standard is undertaken by Yang Chengce Hong, and the Yi standard is difficult to entrust the first Tianjin small plate screening research and development to be closely responsible for the selection of GD/T8593.11998
ISO
1S (International Organization for Standardization) book composed of various international standard groups (1SO finished products are the world federation of international standards - the main body) and the technical committee completed it. The voting committee was established based on its professional expertise. The Huachenghuizhou Medical Equipment Association should have the right to participate in this work. Non-governmental organizations with a sense of responsibility can also participate in this work. In all technical standard activities, all technical committees should work closely with the National Electrical and Mechanical Quality Committee (EC>) to formulate international standard changes. Only 75% of the votes in the field can be added to the voting.
International Standard 1S5-05,1:1997 and I5060,2,1953 was prepared by the T5/TC197 Technical Points Publication S3 Course New Security Committee.
1306415.1 was responsible for the technical revision of the first edition of IS06405:1982, the second edition of the United Nations. 150) Upper engine fuel-fuel operation and other display symbols are composed of the following parts: Part 1: Common symbols.
Part 2 Machinery operation and assembly area maintenance scope
National Standard of the People's Republic of China
Earth-moving machinery
Operator operation and other display symbols
Part 1 Common symbols
Forih-mnring machinery--Sybols far operalor controlsand ntherdisplayPart:common symbols You agree to the provisions of the ten general symbols of the city of machinery CA/T3593.1—1998
eqw150 64c5.7.1991
This standard is for the reference of other types of machines. 2. The following referenced articles are not included in the standard. They constitute the meaning of this standard before they are published in this standard: When this standard is published, the versions shown are valid. All violations will be revised. When using this standard, the following new versions should be considered. B/16912.117 Medical heart, etc. are shown in the following alternate graphics: Part: Formation of shape matching numbers (gTS(2 34-1.1::9A8)
(B185 National shape matching number muscle head stock Ying should be nexS41960%) 3. Definition
This standard is not a document under the book,
3. 7 Symbols syr:bol
Mountain force number is the original production, printing science conformal disease can be expressed · is the object or inducement, its right front chemical holding sign visual diagnosis, 4 general list
4.1 All the symbols in the general standard are expressed in the form of wheel ratio, but in the international standard, it is not possible to express the symbol in the form of wheel ratio, but in the international standard, it is necessary to change the symbol in the form of wheel ratio, and the symbol can be changed. 4.2 Subject to the limitations of some printing and display technologies. In order to make the driver stone parts cleaner, the symbol can be added to the bottom of the code, or it can be modified slightly. The basic graphic will not be changed. The above design is necessary: 4.3 To change the shape of a graphic leopard number and only the special design can be changed or matched with the design of the equipment section, the special number wheel fan line can be changed. The set of symbols is constant, and the symbol can be held Sex comfort preservation unchanged: Graphic design can make these changes, 4.4 In order to make the currency wear numbers all virtual bottom printing ambassador company see the life of the bay, in addition to the ten special symbols of the male explanation, there should be a careful agricultural indication.
4.5 Most of the incentive model currency accumulation is not controlled by the child, in this relative wood fast method, the use of the various symbols of the symbol should be combined with the symbol, with a new symbol, such as: 8.4 engine lubrication along the selection of the machine will be the number 6.1 put the engine symbol, 5. oil equal to the combination of the number and 3.1 ticket waiting
4.6 in the symbol on the right side of the machine to reduce the cow's side and the shape of the thick, the series flow is very determined that the machine is the left chrome motor. The display resistor or network image Quality and Technical Supervision Bureau 1998-061/Approved 1999040: Implementation
tiB/1 8593. 1-1998
When the shape of the parts is formed, the blood is actually more than enough for the machine to move from the sleeping part to the top. 2.? The back of the symbol should have a good contrast, preferably with precious colors. When the back of the symbol changes, for example, from faded color to faint color, or the bottom of the symbol changes at the same time. 2.8 The symbol should be set in or near the machine shown in the symbol. When there are more than one symbol, the symbol should be set in the direction of the special number in the direction of the special number. 4.9 The sieve head used in the symbol should be placed in accordance with G! 252 standard characters should comply with the principles of GRT1SC2.: 4.10: mark equal sign /1FC: registration number, small 5000 130 number large 500 number I in the registration number
4.11 special letter numerals can be used, 9.3 to 9.17 in the sub-number. When the number is used on the machine! The transmission system with the same beauty is intended to be used for the display, the letter type and size of the letter are limited, other types, small letters can be replaced, but the flow should be clear and easy to read, 4.2 this standard symbol as small as possible 32, four \ [\ square xm. \\ corner mark should not be divided, which helps to ensure that all teaching number graphics have the same size image display. 5.1 The following colors are used: a) if the machine is faulty or seriously damaged, please check it immediately b) if the machine is faulty or seriously damaged, please check it immediately b) if the machine is faulty or seriously damaged, please check it immediately b) if the machine is faulty or seriously damaged, please check it immediately b) if the machine is faulty or seriously damaged, please check it immediately b) if the machine is faulty or seriously damaged, please check it immediately b) if the machine is faulty or seriously damaged, please check it immediately c) if the machine is faulty or seriously damaged, please check it immediately 5.2 The following colors can be used when the machine is faulty: R) blue, main light of the headlight is not displayed; green, switch the signal and display. 5.3 with such as heat transfer cooling system on the vehicle. Red indicates heat, blue indicates cold 6 basic special number
engine
transmission system
ryadmiss.on systrs
ISO/EL
everyone
GBT 8593. 1
is used to
hytraulic syten
auxiliary drive system
brakaeystem
coolant
make ai:
exhastgas
presture
to||ISO
registration number
lead||(for example; start
symbol
symbol
, in
all use
only||to||other symbols:
symbol
(for example:
red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red||red level
继情零
1empers1l:
Failure/failure
fuil.ruufu-ntipu
Qigong Xiaguan passed smoothly
al.sr: sw:telh/mcehanism
Used in the store
for the quality class
150O/1EO
registration number
no capital mark
combination symbol, state quality
special agent line
length of force
in the middle please
use the standard
quantity combination symbol
number·use the wave rest
number of the youth to show the length of the line
only the local red house
symbol
use
number yuan charge
set the street please prohibit the mark
general symbol
GB/T 8593.1
cazaye
disengage
product safety/pass
an/s:art
break/stop
aff/stop
pass and break
onandoff
additional display
p.us/tnercase/ponitive
mlarity
registration number
TSO/TEC:
GB/T 8593.: —1998
reduction/reduction/negative
minus/deercase/ncgitive
Belurty
ligbter
positive research electric cloud device
bartery shargng cendi
drinking/time and off/timer
tlock/=mz switeh/ti:uer
hour/job timer
lrtrtele:r/tl:iphe.l per
ating lr.t.ts
seat belt: Lap belt only
ISQ/IEL
registration number
0/r 8593.
Note changes. castintoualy
linee?
continuously
continunusiy
rota-ioua
through
youre mpty
half-full
wariabtc..
vel zme half-full
full porcelain
. volume fll
remember the violent movement of the heart for a forward
mschiue
tior-.forward
: the movement of the instrument is the same as the movement of the tampon
michine
ton.reverse
direc-
matched symbol
fast dream dotted line long production
shape, forward driving
direction of the Xie diagram can be
avoid clockwise rotation
the first appropriate symbol
replace the blue tailor long
shape, then the basic movement
direction of the side medical doctor can
clockwise environment turn
invest in the vehicle management number
liang number of state's work force to a farm
Lctrol Beverting
rireclic—dal direcrirn
probe the operation of the pole
sotrol
oycrating
direutn. al:gle Errer.
adjust the needle to turn
wiuciwiserl is
clockwise turn
:uutet-:lockoisr
lubricstiunpuir.t
Wang Runzu test
ubiralion
retain the end of the head!
symbol inclusion
yellow head wood pain whole in
of the city
column number
GB/T 8593.: —1998
Reduce/decrease/burden
minus/deercase/ncgitive
Belurty
ligbter
correctly study electric cloud device
bartery shargng cendi
drinking/time and closing/timer
tlock/=mz switeh/ti:uer
hour time/operation timer
lrtrtele:r/tl:iphe.l per
ating lr.t.ts
seat belt: Lap belt only
ISQ/IEL
registration number
0/r 8593.
Note the change. Cast in totality
linee?
continuous change
continunusiy
rota-ioua
through
youre mpty
half-full
wariabtc..
vel zme half-full
full porcelain
. volume fll
remember the violent movement of the heart for a forward
mschiue
tior-.forward
: the movement of the instrument is the same as the movement of the tampon
michine
ton.reverse
direc-
matched symbol
fast dream dotted line long production
shape, forward drivingbZxz.net
direction of the Xie diagram can be
avoid clockwise rotation
the first appropriate symbol
replace the blue tailor long
shape, then the basic movement
direction of the side medical doctor can
clockwise environment turn
invest in the vehicle management number
liang number of state's work force to a farm
Lctrol Beverting
rireclic—dal direcrirn
probe the operation of the pole
sotrol
oycrating
direutn. al:gle Errer.
adjust the needle to turn
wiuciwiserl is
clockwise turn
:uutet-:lockoisr
lubricstiunpuir.t
Wang Runzu test
ubiralion
retain the end of the head!
symbol inclusion
yellow head wood pain whole in
of the city
column number
GB/T 8593.: —1998
Reduce/decrease/burden
minus/deercase/ncgitive
Belurty
ligbter
correctly study electric cloud device
bartery shargng cendi
drinking/time and closing/timer
tlock/=mz switeh/ti:uer
hour time/operation timer
lrtrtele:r/tl:iphe.l per
ating lr.t.ts
seat belt: Lap belt only
ISQ/IEL
registration number
0/r 8593.
Note the change. Cast in totality
linee?
continuous change
continunusiy
rota-ioua
through
youre mpty
half-full
wariabtc..
vel zme half-full
full porcelain
. volume fll
remember the violent movement of the heart for a forward
mschiue
tior-.forward
: the movement of the instrument is the same as the movement of the tampon
michine
ton.reverse
direc-
matched symbol
fast dream dotted line long production
shape, forward driving
direction of the Xie diagram can be
avoid clockwise rotation
the first appropriate symbol
replace the blue tailor long
shape, then the basic movement
direction of the side medical doctor can
clockwise environment turn
invest in the vehicle management number
liang number of state's work force to a farm
Lctrol Beverting
rireclic—dal direcrirn
probe the operation of the pole
sotrol
oycrating
direutn. al:gle Errer.
adjust the needle to turn
wiuciwiserl is
clockwise turn
:uutet-:lockoisr
lubricstiunpuir.t
Wang Runzu test
ubiralion
retain the end of the head!
symbol inclusion
yellow head wood pain whole in
of the city
column number
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.