QB/T 1685-1993 Requirements for the appearance of cosmetic product packaging
Some standard content:
Light Industry Industry Standard of the People's Republic of China
Appearance Requirements for Cosmetic Product Packaging
1 Subject Content and Scope of Application
This standard specifies the appearance requirements for cosmetic product packaging. This standard applies to all types of cosmetics.
2 Packaging Classification
The color and material classification of cosmetic packaging is divided into: a.
Bottle (including plastic bottle and glass bottle);
Cap factory including outer cover, inner cover (plug, pad): bag (including paper bag, plastic bag, composite bag): tube;
Box including red box, plastic box, reading box
foodmate.net1
Netizen exchange information
Mist can
Tube (including finger tube, bottom tube): cosmetic pen;
Outer box packaging (including flower box, middle plate, big box): other.
3 Requirements for the appearance of cosmetic product packaging
Product packaging materials should be non-toxic and safe. 3.1 Bottle
QB/T 1685-93
3.1.1 The bottle body should be stable, straight, smooth, and basically uniform in thickness, without cold cracks, cracks, or obvious scars or deformation. 3.1.2 Straight, smooth, without burrs (burrs), good thread and other matching structures, and good end work. 3.1.3 The bottle is clean inside and outside.
3.1.4 The bottle and the cover are tightly matched, without teeth, looseness, or leakage. 3.2 Salt
3.2.1 Internal difference
3.2.1.1 Neat, smooth, without deformation, without dirt, oil stains, etc. 3.2.1.2 It matches well with the bottle and the outer cover and cannot be left unused. 3.2.2 Outer coverwww.bzxz.net
3.2. 2. 1 Straight, polished, without any broken, cracked, punctured (stuck) or bursting, uniform color, no color shift, consistent with the standard sample. 3.2.2.2 Threads and other fittings are intact
3.2.2.3 Folding without electrochemical errors or hot stamping is evenly matched, and the color is consistent with the standard sample. 3.2.2.4 The cover is turned outward. 3.2.2.5 The cover and the bottle are tightly matched, without slipping, loosening, leakage, etc. Approved by the Ministry of Light Industry of the People's Republic of China on March 28, 1993, and implemented in 19930-01
QB/T 1685-93
3.3.1 There shall be no wrinkles, scratches, air bubbles, and the color is consistent with the standard sample. 3.3.2 The seal should be firm and straight, without sweat, perforation, leakage of paste (liquid), etc. 3.3.3 The composite bag is solid and the coating is uniform. 3.4 Softness
3.4.1 The tube is smooth, neat, evenly thick, without obvious scratches, and the luster is consistent with the standard sample. 3.4.2 The seal should be firm and straight, without opening, wrinkles, etc. 3.4.3 The cover should meet the requirements of 3.2.
3.5.1 The box surface is smooth and straight, without obvious scratches, rough edges (burrs), and the color is uniform, consistent with the standard product. 3.5.2 The tightness of the opening is appropriate and meets the test requirements of 4.2. 3.5.3 The mirror surface, contents and box are firmly bonded, and the mirror image is good. No scratches or breakage from the bottom 3.6 Spray cans
3.6.1 The body is intact, rust spots are not visible, the weld is smooth, and the upper and lower parts are particularly scratched. The color is uniform and consistent with the standard sample. 3.6.2 The roll can be flat and there should be no cracks or deformation. 3.6.3 The cover should meet the requirements of 3.2.
3.? Ingot tube
3.7.1 The tube body is straight, smooth, and there should be no obvious scratches. The color is uniform and consistent with the standard product. 3.7.2 The tube body is loose and tight to ensure that the belt can be rotated out. I push the companion network netizens to exchange information 3.8 Makeup pen
3.8.1 The pen holder should be smooth and straight, and the pen holder should not be glued or the paint should not crack. 3.8.2 The surface of the pen cover should be clear and tight. 3.8.3 The logo should be complete and the characters should be clear
3.9 Trademarks, instructions, and grid certificates 3.9.: The printed trademark should have a correct pattern and clear color, and the marks should be clear and solid. 3.9.2 The trademark should be affixed firmly and should not be extended, missed, reversed, or wrongly affixed. After affixing, the corners should not be tilted or warped. 3.9.3 The instructions should be printed on a neat surface with clear characters. 3.9.1 The marks and patterns should be in place. 3.9.5 The marks and patterns should be clear and the factory name, inspector code, etc. should be marked. 3.10 External packaging (flower box, medium box, large box) 3.10.1 Flower box
3.10.1.1 The flower box should be tightly matched with the box packaging. 3.10.1.2 The flower box should be clean, neat, flat, and folded without missing edges or corners. 3.0.1.3 The adhesive parts of the flower box should be firmly closed, without any signs of pasting, cracking or mutual adhesion, and the color should be uniform and consistent with the standard sample. 3.10.1.4 The product should not have micro-packaging, missing packaging or damage packaging, and the box cover should be closed properly. 3.10.1.5 The product flower box (including product packaging) should indicate the product's trademark name, factory address, production date (shelf life) or other specifications, and the license number should be marked if necessary. 3.10.2 Boxes
3.0.2.1 The middle box should be clean, straight and flat. 3.13.2.2 Strictly prevent the wrong installation, missing installation and inverted installation of products. 3.10.2.3 The box head (sticker) should be straight, clear and complete, and have the product name, quantity and factory name. 3.10.3 Sales
3.10.3.1 The six dragons should be clean, straight, smooth and firmly sealed. There should be no wrong installation, missing installation or inverted installation of products.
3.10.3.2
QB/T 1685--93
3.10.3.3 The labels on the outside of the box should be clear, complete, and appropriately positioned, and should include the product name, factory name, factory address, license number, specifications, quantity, gross weight, volume, factory date, precautions, etc. 3.11H he
3.11.1 Recordable spray cans should comply with 3.1 and 3.6 3.11.2 For the shelf life of the product, it is not necessary to indicate if the product quality has no problems for more than three years. 3.11.3 The implemented standard should be marked on the product manual and packaging. 4 Test method
4.1 Comparison between self-test and standard sample
The comparison between the tested and standard sample should meet the specified requirements. 4.2 Tightness test of box products
The sample cannot be forcibly peeled off with fingers. Hold the edge of the cover and the bottom will not fall off. The test is qualified. Additional instructions:
This standard is proposed by the Quality Standards Promotion Department of the Ministry of Light Industry. This standard is drafted by the National Chemical Standards Association. This standard is drafted by Beijing Liyuan Company, Beijing Richuan Chemical Factory No. 3, and Beijing Liyuan Daily Chemical Factory. The main drafters of this standard are Chong Qing, Li Zao, Ma Xiuzhen, Dong Shufen, and Liu Zuoyi.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.