Some standard content:
C5 97.1ec
Classification number: Y54
Preparation number: 157052005
Light Industry Standard of the People's Republic of China
QB/T1148-2005
Supervisory Q/T1148991
Pins
Officepins
Published on 2005-03-19
National Development and Reform Commission of the People's Republic of China Implemented on 2005-09-01
This standard is a revision of Q1148-1991 pins. This standard QB/1148-19 village to the following difference
a image design product size:
QA/T1148-2005 www.bzxz.net
a) you do not eat use average forward, needle length limit Bin selected from the original "0.5m received to 0.3mm5! The order of the diameter limit error is the positive error, this statement is not accurate enough, now received as the basic technical size is the smallest value: the next standard 4? The needle body curvature exceeds the intention of the whole, now slightly for obvious curvature, the corresponding test method is changed to the standard 4.1 requirements for raw materials two one in other requirements one increase the extreme eye difference, the efficiency is 1, and the most reliable small box: two training batch inspection month, requirements, test methods are generally AQ [. (3) the classification of unqualified products in the sea head needle standard needle protection process as a daily defect, it will be classified as a heart failure This standard is issued by China Light Industry Association and is under the jurisdiction of National Standardization Center for Light Industry Products. This standard is issued by: Shanghai Xinwen Sports Products Co., Ltd., Shanghai Dianyue Sports Products Co., Ltd., Shanghai Xinwen Sports Products Co., Ltd., Jinhua Zhouwensi Co., Ltd., and Xie Jianjiang Dada Sports Products Co., Ltd. Wuyi Brand Foreign Gifts Co., Ltd. This standard is mainly issued by: Zhang Yue:
It was first issued in June 1991, and the first headlight modification was carried out. From the date of implementation of this standard, the light industry department issued by the Ministry of Chemical Industry shall issue the light industry department 48-1 standard
tt||QB/T1148-2005
This standard specifies the design and naming requirements, test methods, test rules and punctuation, location, transportation, This standard applies to the following standards. 2. The following missing normative references are the following clauses that become the clauses of this standard. They are the dated references. All subsequent changes (excluding the contents of the certificate or the error) are not applicable to the following standard. However, for the purpose of research, the latest versions of these documents can be used: All the documents without dates can be used for reference. 1. New version 4. Three major standards. G [91-2000 Similar storage and transportation markings || tt || GB/12828.1-2003 Counting throwing fence inspection process Part 1: Pulling acceptance (AQ.) Searching batch inspection plan oil fence Q38261999 Light 2: Gold star coating and chemical treatment layer resistance to neutral salt test (NS5 station QE/3872-1 light product gold reduction layer corrosion Test result book evaluation due to the national technical acupoint product bureau order No. 43 quantitative gas product design supervision book regulations "national purchase three transfer technology theft product belongs to the hot collection supervision [199 No. 172 product identification mark dynamic 3 classification and naming || tt || 31 product appearance || tt || 1! This control management in the edition time, date zero, quality test supervision replacement inspection required quality total after 12005 mouth 30 month pressure home quality only good price inspection inspection total film today No. 8 Product design supervision is formulated, 2K is carried out, and at the same time the quality supervision of the product manufacturer is measured and prepared (National Building 43
OH:T1148235
Product size
Love limit according to the production
white exchange length
3.3 Special coal planning products are provided by the supplier in the gas juice month 4 requirements
4.1 Needle body
Light medical, obvious world and Shenzhen engineering marks. 4.2 Needle tip
Extreme difference
Scientific development, such as sharp white points, no flat tip: sentence tip, flat line: 4.3 Sing
Embryographic, no end, la
4.4 External
Drive should be sound, rust, self-peak Mao this film about: should not be black. 4.5 Anti-rust ability
Reach level 6 of the test equipment.
4.G Small box packaging quality
Small box packaging quality shall comply with the regulations in Table 2, and the specifications shall comply with the "Measurement and Inspection Regulations of the Industry": Table 2
Lake customer code
5 Test method
5.1, the red class says
use the microscope to measure
5.2 Anti-rust ability
Technical B3826-1999 provisions: wide range variable week packaging 1h limit blue
point A
5.3 Small box packaging quality
200 catties win balance and standard estimation period reduced by 1 other items
6 Standard inspection rules
6.1 Strict inspection of the entire product source.
6.2 Do not use the replacement parts, the single unit is small basin: QBT-1146—2005
.3 Return to the north standard test according to the special end inspection level S3 of B\2828.1103 with the inspection sample plan of the soul of the determination certificate 6.4 Reverse inspection three and requirements, test method AQL compensation length 3 provisions of Table 3
Rust resistance
to the tour extension
replacement 6.6 confusion
6.5 Except for rust or strength, do not need to Bo group inspection three S-3 for a sample to compete for the second log in, connect the table 3. AO will judge the specifications of each machine according to the customer's requirements.
6.6 Anti-rust performance (B3%32-1999) is determined. If the corrosion level is lower than level 6, it means that the machine is not suitable for rust. 7. Marking, packaging, transportation, purchase and storage
7.1 Marking
In the introduction and installation, the production name, product name, pipe number, import number, positive number, etc., the body head, the standard requirements, the first period or other marks, strictly follow the "stop mark" and comply with the regulations. The file mark should comply with GB/T 191 20M.
7.2 The packaging
should be sounded and sounded, and the special gas installation should be sounded and sounded. The internal packaging should be complete, dry, and marketed. The internal packaging should be inspected and certified. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed. The internal packaging should be complete, dry, and marketed.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.