HG 2273.3-1992 Natural Gas Secondary Conversion Heat Protective Agent HG2273.3-1992 Standard Download Decompression Password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
Natural Gas Secondary Conversion Thermal Protective AgentbzxZ.net
Subject Content and Scope of Application
HG 2273. 3 - 92
This standard specifies the technical requirements, test methods, inspection rules, and marking, packaging, transportation and storage requirements for type Z205 natural gas secondary conversion thermal protective agent.
This standard applies to type Z205 natural gas secondary conversion thermal protective agent used in conjunction with type Z204 catalyst in the secondary reformer of ammonia synthesis plants.
2 Reference standards
GB191 Packaging storage and transportation pictorial symbols
HG2273.4 Test methods for natural gas first and second stage conversion agents 3 Technical requirements
3.1 Main physical properties and chemical components
The main physical properties and chemical components of Z205 natural gas second stage conversion thermal protective agent are listed in Table 1 and Table 2. Regular inspection is required. Table 1 Main physical properties
Waste gray ring
Nickel oxide
3.2 Technical indicators
(Al,O,)
Nominal size, blood
Calcium oxide
Main chemical components
Silicon oxide
Ferric oxide
(FeO,)
Bulk density
1. 10 ~1. 15
% (m/m)
Potassium oxide + sodium oxide
(K,O+Na,O)
Under the test methods and inspection rules specified in this standard, the product quality of Z205 natural gas two-stage conversion thermal protective agent must meet the technical indicators listed in Table 3.
Table 3 Technical Indicators
(Nio), %
Almost average, N/particle
Radial crushing strength of particles
Percentage of particles with a strength lower than 200 N/particle, %5.0
Approved by the Ministry of Chemical Industry of the People's Republic of China on 1992-03-03 Heat resistance
No adhesion or fragmentation occurs at 1300°C
Implemented on 1993-01-01
4 Test methods
The radial crushing strength, heat resistance and main chemical components of HG 2273.3-92
The test of HG 2273.4, Chapter 4, Chapter 5 and Chapter 6 of the second-stage conversion thermal protective agent for natural gas of type 205 is carried out. 5 Inspection rules
5.1 The quality of Z205 natural gas two-stage conversion thermal protective agent shall be inspected by the quality inspection department of the manufacturer. The manufacturer shall ensure that all products leaving the factory meet the technical indicators specified in this standard. 5.2 In normal production, products are inspected in batches, and the representative quantity of each batch shall not exceed 10. 1.5.3 The test samples of the products shall be randomly sampled by the dedicated personnel of the quality inspection department. The number of sampling units shall be three times the cube root of the total number of units in the product packaging barrels, that is, 3×VN (N is the total number of barrels). If there is a decimal, it shall be rounded to an integer. Take out the same number of samples from each opened barrel, a total of about 3 samples, and after being fully mixed, divide them into chemical component analysis samples, activity and strength test samples, test samples and storage samples by reduction method, and put them into sample bottles, seal them, and affix labels: indicate the product name, model, batch number, representative quantity, sampling date, sampler, etc. The samples can be kept for at least one year for inspection. 5.4 When the product fails the inspection, the relevant testing devices, instruments, meters, chemical reagents, etc. shall be checked and calibrated, and retested. If the second inspection is qualified, the third inspection is still required. If the third inspection is also qualified, the quality of the batch of products is qualified. If the second or third inspection is unqualified, the product is considered unqualified. All unqualified products are not allowed to be sold as qualified products, nor can they be mixed with qualified products in the warehouse.
5.5 When retesting, re-sampling can be carried out according to Article 5.3 of this standard, and the test shall be carried out according to the test method in Chapter 4. 5.6 When judging whether the measurement results meet the requirements of the standard, the rounded value comparison method shall be used. 5.7 When the supply and demand parties have disputes over the quality of the products, the demander has the right to re-inspect according to the inspection methods and inspection rules specified in this standard, or to arbitrate with relevant units.
6 Marking, packaging, transportation, storage
6.1 The products listed in this standard should be packaged in iron drums that can prevent moisture and pollution. The outer wall of the packaging barrel must be painted with earth gray or grayish white oil. Each barrel contains 40~50kg-
6.2 Pay attention to sealing when packaging. The packaging container should be accompanied by a product quality certificate, which should be stamped or represented by the inspector.
6.3· The outside of the packaging container should have a firm mark, indicating the product model, name, batch number, gross weight (kg), net weight (kg), trademark, production period, manufacturer name, and prominently indicate the moisture-averse * mark and the &*prohibited rolling * mark in Figure 6 of GB191. 4 The packaged products should be stored in a dry warehouse, and pollution and moisture are strictly prohibited. 6,5. During transportation and loading and unloading, it is strictly prohibited to drop, roll and collide. During transportation, there must be rainproof facilities. Additional instructions:
This standard is proposed by the Science and Technology Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of the fertilizer catalyst standardization technology unit of the Ministry of Chemical Industry, and this standard is drafted by the Southwest Institute of Chemical Industry. The main drafters of this standard are Kou Kaibo, Chen Changyun, Wu Dengyi, etc.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.