GB/T 5642.1-1985 Flared welded pipe joints
Basic Information
Standard ID:
GB/T 5642.1-1985
Standard Name: Flared welded pipe joints
Chinese Name:
扩口式焊接管接头
Standard category:National Standard (GB)
state:Abolished
Date of Release1985-01-01
Date of Implementation:1986-09-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:Fluid systems and general parts>>Pipeline components and pipelines>>23.040.60 Flanges, pipe joints and connecting parts
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1986-09-01
other information
Release date:1985-11-25
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 5642.1-1985 Flared Welded Pipe Fittings GB/T5642.1-1985 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Flared type tube fittings-
Weld male connector-Assembly
This standard applies to expanded type welded pipe fittings for piping systems with oil and gas as the medium. GR 5642.2--85
Marking example:
Expanded welded pipe joint with an outer diameter of 10 mm: Pipe joint 10 GB 5642.1-85
Published by the National Bureau of Standards on November 25, 1985
GB 5847-85
I GB 564E-R5
UDC621.643.4www.bzxz.net
GB 5642.186
Implemented on September 1, 1986
Outer diameter of pipe
M16 × 1.5
M18 × 1.5
M 27 × 1.5
M30 × 2
M33 × 2
M36×2
M39×2
M42×2
M45×2
Technical conditions shall comply with the provisions of GB5653
GB5642.1—85
85 "Technical conditions for flared pipe joints". St
Additional remarks:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and approved by the Standardization Research Institute of the Ministry of Machinery Industry. Quality (steel)
kg/100 pieces
This standard was proposed by the Standardization Research Institute of the Ministry of Machinery Industry, Shanghai Hydraulic Accessories!, Jiaoyang Automotive Research Institute, and Shanghai Hydraulic Pneumatic Research Institute. The main drafters of this standard are Hu Lu, Product, and Qiang Neng
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.