GB 16170-1996 Limits of noise level at fixed position on motor vehicles GB16170-1996 Standard download decompression password: www.bzxz.net

GB 16170—1996
This standard is formulated in accordance with Article 11 of the Regulations of the People's Republic of China on the Prevention and Control of Environmental Noise Pollution. In view of the increasingly serious noise pollution from urban traffic in my country, and the fact that a large number of vehicles in use have become the main noise source of urban road traffic noise, it is urgent to strengthen the monitoring and control of noise radiation from vehicles in use. This standard focuses on the control of noise emissions from vehicles in use under stationary conditions. In order to better promote the implementation of this standard and the technical progress of vehicle user control, this standard is divided into two time periods for implementation based on the date of vehicle production.
This standard is proposed by the Science and Technology Standards Department of the State Environmental Protection Administration. This standard is interpreted by the State Environmental Protection Administration. 1 Scope
National Standard of the People's Republic of Chinabzxz.net
Limitg of noise emitted by stationary road vehicles
Limitg of noise emitted by stationary road vehicles This standard specifies the limit of stationary noise emitted by vehicles. This standard applies to vehicles in use that are allowed to travel on urban roads. 2 Reference standards
GB3730.1·88 Terms and definitions of motor vehicles and semi-trailers Vehicle types GB/T14365-93 Motor vehicle stationary noise measurement method 3 Motor vehicle stationary operating noise limit values
3.1 Vehicle classification shall be carried out in accordance with GF3730.1.
3.2 The operating limit values ​​shall be implemented in accordance with Table 1.
Vehicle type
Minibus, truck
Light bus, cargo truck
Medium bus, freight truck
Large bus
Measurement method
Fuel type
Vehicle production date
1_4300r/min
Gasoline"
1.>4300r/rmin
N>147kW
According to the rated power specified by the manufacturer
1998 Before January 1, 2008, the following shall be followed: 1 to 5.3 of GH/T14365 Motor Vehicle Stationary Noise Measurement Method. GB 16170-1996 approved by the National Environmental Protection Bureau on March 7, 1996, and implemented from January 1, 1998.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.