This standard specifies the rules for the trial wear inspection of various types of boots and shoes before they are officially put into production. This standard applies to the trial wear inspection of various types of leather shoes (daily wear boots, work boots, heavy labor protection boots, sports boots, etc.) before they are officially put into production. QB/T 2674-2004 Rules for the trial wear inspection of leather shoes QB/T2674-2004 Standard download decompression password: www.bzxz.net

ICSB1.060
Classification number: Y78
Registration number: 15140-2005
Light Industry Standard of the People's Republic of China
QB/T2674—2004
Replaces QB/Jiang 3640—1999
Leather shoes-Rules for determination of the suitablityPublished on December 14, 2004
National Development and Reform Commission of the People's Republic of ChinaImplemented on June 1, 2005
This standard is a revision of QB/T3640-1999 leather shoes fitting inspection rules: Compared with QB/T3640-1999, this standard mainly adds industry-specific features, adds definitions, and clearly defines the test objects, wearers, and controlled categories: the number of fittings is "at least 6 pairs, preferably including a series of shoe sizes"; and makes clear provisions for the test objects.
This standard was proposed by China Leather Industry Federation. This standard was drafted by the Standardization Center.
The drafting unit of the standard was China Leather and Accessories Industry Research Institute. The main drafter of the standard is Xiao Ling.
QB/T2874—2004
This standard was first issued in 1990 as the light industry standard ZB/Y75021-19906 wear test specification, and was converted into the light industry standard QH/T3640-1999 in April 1999. This is the second revision. From the date of implementation, this standard replaces the light industry standard QBT3640-1999 (changed wear test specification) issued by the State Light Industry Administration.
HYKANYKAea=||tt ||1 Scope
Rules for trial wear inspection of leather shoes
This standard specifies the trial wear inspection rules for all kinds of leather shoes before formal production. QB/T2674204
This standard is intended to apply the trial wear inspection of all kinds of leather shoes (such as cowhide pressure boots, heavy duty shoes, transportation boots, etc.) before formal production of new products:
2 Definitions
This standard is applicable to all kinds of leather shoes.
The test personnel are the wearers during the test period.
Observation Wearing day
If B (continuous or short-term)
controlled footwear www.bzxz.net
The shoes have been made of various types, performance, materials, styles and craftsmanship. 3 Fitting conditions
3.1 The test shoes must be 6 pairs, preferably including the shoes in the case. 3.2 Selection of test personnel
8.2.1 The foot type of the test personnel should be different from the foot type of the test personnel. 3.2.2 The selection of test personnel includes gender, age, occupation, specific day or specific activity. 9.2.3 The tester shall communicate with the front door of the test to confirm the actual situation of the whole wear and test. 3.3 When it comes to leather shoes, such as dust, color selection of shoes, etc., the wearer shall wear the user's color. 3.4 Test time
See Table 1.
New pull
Niu Huoyao
Two shoes
Year-old labor insurance silicon
Transparent period
New materials
30 ~·60
Single license for learning
New technology
30~-69
45~·6a
QB/T2874—2004
4 Fitting method
4.1 According to the different fitting conditions, they are divided into various fitting conditions such as styles. Check the fitting safety and health problems regularly and record the results in the original record
4.2 4.2.1 Pair of testing
4.2.1 Pair of testing - one for new and one for controlled, the tester is still old. 4.2.2 If the wood is not tested according to the method of 4.2.1, the tester shall take the same test model and the controlled model as the tester. 5.1 Test or testable, the test result is still valid, 5.2 The result of 5.1 is not used, and the following three points are required: a) Ten requirements; 5) and the requirements of the tester: 6 Result report
6.1 Note the standard of the machine, the monitoring system.
6.2 The name of the test personnel, sex, age, occupation, foot requirements, pressure and test environment, etc. 3 The type of test plastic, number of books, wear plan, time of test, 4 The number of items that did not appear after the test period (double or 5) The number of items that appeared (times or only) and the time of the problem
6.5 According to 5.1 and 5.2, report the results and give a comprehensive test price, HY KANY Kca=
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.