This standard specifies the inspection, sampling and qualification determination methods for the safety requirements of imported and exported liquid heating appliances. This standard applies to household and similar liquid heating appliances with a rated voltage not exceeding 250V, including electric kettles, electric water bottles, coffee pots, egg boilers, milk warmers, feeding bottle heaters, pressure cookers, cooking pans, stew pots, yogurt makers, steamers, cleaning boilers, etc. SN/T 1372-2004 Inspection Procedure for Safety Requirements for Imported and Exported Liquid Heating AppliancesSN/T1372-2004 Standard Download Decompression Password: www.bzxz.net

ICS 97. 100. 10
People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard SN/T1372-—2004
Safety requirements for import and export liquid heating appliances
Inspection procedures
Rules for the inspection of safety regulretentsfor appliances of heating liquids for import and export2004-06-01Promulgated
People's Republic of China
General Administration of Quality Supervision, Inspection and Quarantine
2004-12-01Implementation
This standard is under the jurisdiction of the Certification and Accreditation Administration of the People's Republic of China. Drafting units of this standard: Guangdong Exit-Entry Inspection and Quarantine Bureau of the People's Republic of China. Main contributors: Huang Chengpai, Zhuang Xiaobo, Xia Disheng. SN/R 1372-2004
1 Scope
Safety requirements for inlet and outlet liquid heaters
Inspection procedures
This standard specifies the inspection, sampling and qualification methods for the safety or safety requirements of inlet and outlet liquid heating appliances. 5N/T 1372-2004
This standard applies to liquid heating appliances with a rated pressure not exceeding 2:GV and similar purposes, including electric kettles, electric water bottles, coffee makers, egg yolk heaters, steamers, cooking utensils, cooking pans, acid cookers, steamers, cleaning and boiling appliances, etc. 2 Normative referenced documents
The following documents have their provisions incorporated by reference in this standard. For any referenced document with a date, all subsequent revisions (excluding errors) are not applicable to this standard. However, for any referenced document without a date, the latest version shall apply to this standard. GB: T2838-1367 Batch counting and sampling table (applicable to rapid inspection of subsequent batches) G4706.1-199% Safety of household electrical appliances Part 1: General requirements GB706.199, 1999 Safety requirements for similar household electrical appliances - Part 1: General requirements 3 Technical specifications and definitions of the following standards: inspection lot
Imported inspection lot
refers to the same inspection lot of products under the same company, quality assurance, under the same shipping order, the same type and model, produced in the same unit, also known as batch. 2 Inspectionbzxz.net
4.1 Inspection method
4.1.1 Import inspection or: verification + single inspection: 4, 1.2 Export inspection method: type test-sampling inspection. 4.2 Sampling
4.2.1 Sampling conditions
4.2.1.1 Liquid heating appliances that apply for export inspection shall be verified to meet the requirements. 4.2.1.2 Liquid heating appliances that apply for export inspection shall provide valid and qualified type test control sheets. From the export inspection to the liquid heater point, the factory shall inspect all the products that have been packaged. 4.2.2 Sampling plan
4.2.2.1 Type test
Each type test shall be conducted. 3 units,
4.3.2,2 Fast sampling by batch
The sampling rate of batch oil sample inspection shall not be less than one batch per 10 batches, and the sampling inspection shall be carried out according to the 4.% sampling plan of GB2828-1987, and the special level S-1: Strictness according to GFH/T2328.-1997 4.6.3 4.2.3 Sampling method
Randomly scan the inspection batch:
SN/T 1372-2004
4.3 Inspection method
4.3.1 Type test
Carry out according to GA2706.1 and GA1706.:3. Type test shall meet the relevant requirements of safety. When the importing country's environmental standards or contracts have special requirements such as electrical integration, damage protection, etc., necessary tests should be added for some days. Under normal circumstances, type tests should be carried out every year. If one of the following situations occurs, single type tests should be avoided: a) when the product is exported for the first time or when it is put into production for the first time in half a year: b) when the design, process and materials used have major changes: quality is unstable, abnormalities are found in the exchange test and users have adverse reactions. 4.3.2 Batch sampling inspection
Batch sampling inspection inspection inspection items, technical requirements and inspection methods are shown in Table 1, Table 1 Inspection items, technical requirements and inspection methods serial number!
Emergency item 1:
Old temperature
Electrical steam temperature
Grounding voltage
Current comparison
(Core: products imported from the city are sent to Sichuan)
Replace the power supply point with the power supply cost (unit: V power quality number, fixed number of external
Pre-note the emergency unit; total position: W or hW: or fixed number of dangerous positions: A) plan transportation! The name, trademark or identification mark of the model and specification of the product shall be marked with the following signs:
, the factory name or agent name shall be marked, and the product description or identification mark shall be in Chinese: For the product type
, the vertical hot water heater shall be sold in hot water at the same time. The device is only a 375mA or 0.7/F device with a rate of 1.2 or 5m2/16.2mn. The total positive wave of the electric giant is required to withstand the test period. The test is based on the requirements of -1386.2. The technical pet has chosen the soldiers or the security point and the quality of the metal part. The resistance is not set in Beijing for years!
The standard value of the electrical area in the research is CH4706.1.-19. It is based on the extension of 2F8. The station average and key parts are checked for the station average related parts. The laboratory test is based on the 5-in-1 validation method. The laboratory test method is GD: 706.1H9A
fR 706. :
Chapter 6 of the vehicle
CE +06. :. -1550
During the random sampling inspection, as long as there is one item that fails, this batch of products will be determined as an unqualified batch: when all items are qualified, this batch of products will be required to pass the special inspection.
SN/11372—2004
If the type test fails, the random sampling inspection should be stopped immediately: it shall not be reported for inspection before passing the new test. 6. Disposal of unqualified batches
Export of unqualified batches is not allowed:
7 Others
Under the storage conditions of Zhengfu, the inspection validity period is 22 months.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.