This standard specifies the format of product variety code cards (hereinafter referred to as "code cards") and the principles for the compilation of product variety codes. This standard applies to the compilation and registration of product variety codes (hereinafter referred to as "variety codes") required for product variety filing management. GB/T 16707.2-1996 General Rules for Product Variety Filing Part 2: Product Variety Code Card Format GB/T16707.2-1996 Standard download decompression password: www.bzxz.net
This standard specifies the format of product variety code cards (hereinafter referred to as "code cards") and the principles for the compilation of product variety codes. This standard applies to the compilation and registration of product variety codes (hereinafter referred to as "variety codes") required for product variety filing management.

GB/T 16707:2—1996
This standard is for the compilation of product variety codes for product variety file management, and clearly stipulates the product variety code card format and product variety code compilation principles for product variety code compilation; it is used to extend and compile the six-layer twelve-digit code specified in GB7635-87 National Industrial and Agricultural Products (Commodities, Materials) Classification and Code and its extended national standards that have not been refined to the classification code of varieties.
This standard is compiled with reference to Appendix A "Product Variety Code Card Format" of Tianjin Municipal Standard DB12/T011-90 "Product Variety File Card Format".
GB/T16707, under the general title "General Rules for Product Variety Registration", includes the following three independent parts: Part 1 (i.e. G/T16707.1): General Rules for Product Variety Registration Part 1: Product Variety File Card Format Part 2 (i.e. GB/T16707.2): General Rules for Product Variety Registration Part 2: Product Variety Code Card Format Part 3 (i.e. GB/T16707.3): General Rules for Product Variety Registration Part 3: General Rules for Product Variety Registration Management Appendix A of this standard is a prompt appendix. This standard is proposed and managed by the National Technical Committee for Document Format and Data Element Standardization. The drafting units of this standard are: Tianjin Electronic Instrument Quality Center Test Institute, China Institute of Standardization and Information Classification and Coding, and Tianjin Archives.
The main drafters of this standard are: Zhu Peiche, Guo Qiyong, Fang Qing, and Liu Jiafu. 1 Scope
National Standard of the People's Republic of ChinabzxZ.net
General rule for putting on record of product variety
Part 2: Code card form of product varietyCB/T 16707-2---1996
This standard specifies the format of product variety code card (hereinafter referred to as code card\) and the compilation principle of product variety code. This standard applies to the compilation and registration of product variety code (hereinafter referred to as "variety code") required for product variety registration management. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in the standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards.GB7635-87 National industrial clothing product (commodity, material) classification and code JB3750-84 Product category classification
ZB Y32 024~90 white card paper
3 Code card format
3. 1 The code card format should comply with the provisions of Table 1. 3.2 In Table 1, the font of "Product Variety Code ×× Card" is 7mm long Fangwei font, and the rest of the characters are 3.5mm long Shang Song font.
3.3 In Table 1, "Product Variety Code Card" is written as "Product Variety Code Sequence Card", which is used for the compilation of product variety codes. At this time, the column (1) in Table 1 is "Enterprise Code" and the column (2) is "Encoder". 3.4 In Table 1, "Product Variety Code Card" is written as "Product Variety Code Registration (Retrieval) F", which is used for the registration (or retrieval) of "Product Variety Code". At this time, the column (1) in Table 1 is "Register", and the column (2) is "Remarks". The code of the unit using this card is filled in on the right of "Unit". 3.5 The paper used for the code card should comply with the provisions of Grade A paper (quantity 250g/m2) in ZBY32024. 4 Principles for the compilation of product variety codes
4.1 Product variety codes are composed of blue-digit Arabic numerals. 4.2 Variety code sequence conditions: Different varieties of the same product that meet the six-layer two-digit code in GB7635 and its extended national standards can be sequenced.
4.3 Variety code sequence method: start from 001 and arrange in ascending order. 4.4 The compilation of variety codes is the responsibility of the industry management department. 5 Coding and card filling examples
Thermocouple products produced by Tianjin Automation Instrument Factory No. 8 include WRR-00 platinum 30-pin 5 thermocouples. This product was approved by the State Administration of Technical Supervision on December 2, 1996 and implemented on July 1, 1997
and coded and registered.
Coding procedure,
GB/T 16707-2—1996
a Determine whether it is a variety according to the relevant standards for product variety classification. The product variety classification should be determined according to the departmental standard JB3750. The product is indeed a variety.
For those without such standards, refer to Appendix A (suggested Appendix) and study and determine with the industry unit. b) According to GB7635 and its extended national standards, check the category and classification code of the product: After checking: it is known that the category of "thermocouple" is V: Instruments, measuring instruments, weighing instruments", and its classification code is 870110170101". c) Determine the enterprise code: Check the national enterprise code regulations and know that the enterprise code of Tianjin Automation Instrument VIII is \10341457-2\. d) Encode: Encode on the "Product Code Sequence Card\", as shown in Table 2. e) The enterprise shall establish a "product variety code registration card" for registration, as shown in Table 3. 1
GB/T16707.2—1996
GB/T 16707. 2
—1996
GB/T 16707.2—1996
GB/T 16707.2
Appendix A
(Suggestive Appendix)
Principles and suggestions for determining product varieties
Product variety marking is the basic calculation unit of the production technology capability of the enterprise. It is an important basis for technical management, production management and planning management. The correct classification of varieties aims to improve the accuracy of national economic statistics and facilitate product management. A. The meaning of product varieties
Variety refers to a product that can meet a certain purpose and marks the technical level and balance of research and trial production. The basic calculation unit for research and trial production. In a product series, the main parameter values ​​or structural forms have changed significantly, and the products that need to be redesigned, trial-produced, and identified are a variety. A2 Conditions for product varieties
A2.1 Products with different design principles are different varieties. 42.2 Products with significant changes in structure are different varieties. 42.3 Products with significant changes in technical indicators are different varieties. A2.4 Products with breakthroughs in technology and materials are different varieties. A2.5
Those that require special testing technical conditions are different varieties. A2.6 Products with different test objects are different varieties. A2.7 Products with different precision are different varieties. A3 The meaning of product series
A series of products with basically the same type characteristics arranged in a regular hierarchy according to size and conditions of use are called a series. A product series contains 10 varieties. The division of these varieties should be based on the values ​​of their main parameters and the structural form. Products that have undergone major changes and need to be redesigned, trial-produced and adjusted are called a variety. For example: YS series micro two-phase asynchronous motors, this series contains products with 6 motor functions such as YS80, YS71.YS63.YS56, YS50, and YS45, which are similar in size and are divided into six grades, 6 varieties.
When only some parameters, technical performance or structural form of the product are changed, but it does not involve changes in the main process equipment and technical design, it cannot be regarded as a new variety, and only specifications are discussed.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.