Some standard content:
Chemical Industry Standard of the People's Republic of China
HG/T2596—94
Various colored perchloroethylene enamels
Published on March 17, 1994
Ministry of Chemical Industry of the People's Republic of China
Implementation on January 1, 1995
W Chemical Industry Standard of the People's Republic of China
Various colored perchloroethylene enamels
1 Subject content and scope of application
HG/T2596—94
Replaces ZBG51063—87
ZBG51064—87
This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage and safety, hygiene and environmental protection requirements for various colored perchloroethylene enamels.
This standard applies to various colors of perchlorethylene enamels prepared from perchlorethylene resin, alkyd resin, plasticizer, pigment, extender pigment (semi-gloss enamel) and organic mixed solvents.
2 Reference standards
GB/T1723
GB/T1726
GB/T1727
GB/T1728
GB/T1730
GB/T1732
GB/T1733
GB/T1769
GB3186
Determination of coating viscosity
Determination of coating hiding power
General preparation of coating film
Determination of drying time of paint film and putty film
Determination of paint film hardness
Determination of impact resistance of paint film
Determination of water resistance of paint film
Determination of polishability of paint film
Sampling of coating products
G B/T5208
Determination of flash point of paint Rapid equilibrium method
2 Specifications and test methods for water used in analytical laboratories GB/T6682
Bending test for paint film (cylindrical axis)
GB/T6742
GB/T6751 Determination of volatile and non-volatile matter in paints and varnishes GB/T6753.1 Determination of grinding fineness of paints GB/T6753.4 Determination of flow time of paints ISO flow cup method GB/T9271 Standard test plate for paints and varnishes
GB9278 Temperature and humidity for condition adjustment and testing of paint specimens Cross-cut test for paint and varnish films
GB/T9286
Packaging mark for paint products
GB/T9750
GB/T 9754
Paints and varnishes Determination of specular gloss at 20°, 60° and 85° of paint films without metallic pigments GB/T9761 Paints and varnishes Visual colorimetry of paints HG/T2-1161 Determination of oil resistance of paint films
3 Product classification
Type I: Glossy varnish
Type I: Semi-gloss varnish
Approved by the Ministry of Chemical Industry of the People's Republic of China on March 9, 1994 and implemented on January 1, 1995
W4
Technical requirements:
The product should meet the technical requirements listed in Table 1. Item
Coating film color and appearance
Fineness, um
Flow time, s
Non-volatile matter content, %
Red, blue, black
Other colors
Hiding power g/m2
Dark complex color
Light complex color
White, pure blue
Dark blue, purple red
Lemon yellow
Drying time, m in
Single pendulum instrument (S)
Double pendulum instrument
Bending test, mm
Impact resistance, cm
Scratching test, grade
Gloss (60°)
Polishability (60°)
HG/T2596—94
Conform to the agreed standard color card and its color
difference range, paint film flatness, brightness
Not more than| |tt||Not less than
Not greater than
Not greater than
Not less than
Not greater than
Not less than
Not less than
Not less than
Oil resistance (immersed in 24h or 60～65℃3h)Water resistance (24h)
Flash point (℃)
Not less than
Conform to the agreed standard color card and its color
difference range Surrounding, paint film is flat, semi-gloss
No blistering, no falling off, no expansion,
Allow the paint film color to turn slightly yellow
No blistering, no falling off, allow the paint film color to turn slightly white-4
5 Test methodwww.bzxz.net
5.1 Test conditions
HG/T2596-94
5.1.1 The state adjustment and temperature and humidity of the test shall be carried out in accordance with the provisions of 3.1 in GB9278. 5.1.2 The test plate shall be carried out in accordance with the provisions of 4 and 6 in GB/T9271. 5.1.3 The preparation of the paint film shall be carried out in accordance with the provisions of 6.2 in GB/T1727. 5.1.4 The thickness of the paint film shall be carried out in accordance with the provisions of 9 in GB/T1727. 5.2 Paint film color and appearance
5.2.1 The color of the paint film shall be carried out in accordance with the provisions of GB/T9761. 5.2.2 The appearance of the paint film shall be visually inspected under the lighting conditions in accordance with 3 in GB/T9761. 5.3 Fineness
shall be carried out in accordance with the provisions of the 50um fineness meter in GB/T6753.1. 5.4 Flow time
5.4.1 Type I shall be carried out in accordance with the provisions of Method B in GB/T1723. 5.4.2 Type I shall be carried out in accordance with the provisions of ISO No. 6 cup in GB/T6753.4. 5.5 Non-volatile content
shall be carried out in accordance with the provisions of GB/T6751, and the test temperature shall be 85-90℃ and the time shall be 3h. 5.6 Hiding power
shall be carried out in accordance with the provisions of Method B in GB/T1726. 5.7 Drying time
According to the provisions of GB/T1728 for surface drying (method B) and thorough drying (method A) 5.8 Hardness
According to the provisions of GB/T1730 for method A: Koenig pendulum method or method B: double pendulum method. Method A Koenig pendulum is an arbitration test method.
5.9 Bending test
According to the provisions of GB/T6742.
5.10 Impact resistance
According to the provisions of GB/T1732.
5.11 Cross-cut test
According to the provisions of GB/T9286.
The cutting spacing is 1mm and the number of cuts is 6.
5.12 Gloss
According to the provisions of GB/T9754 for 60° gloss. 5.13 Polishing
According to the provisions of GB/T1769. The base material is a glass plate that meets the requirements of 3.1 in GB/T9754. The number of polishing times is 200. The gloss after polishing is in accordance with the provisions of 5.12. The proportion of polishing agent: 85 grams of chromium trioxide is mixed with 15 grams of kerosene. 5.14 Oil resistance
5.14.1 Oil: SY1502 gun grease is selected. 5.14.2 According to the provisions of 2.1 immersion method in HG/T2-1611. 5.14.3 The test temperature is method A: 23±2℃, 24h or method B: 60～65℃, 3h. Among them, method B is the arbitration test method. 5.15 Water resistance
5.15.1 The experimental water is prepared according to the provisions of grade 3 water in GB/T6682. 3
W.HG/T2596—94
5.15.2 Test in accordance with the provisions of 9.1A of GB/T1733. 5.16 Flash point
Test in accordance with the provisions of 5.2 of GB/T5208.
6 Inspection rules
6.1 All technical requirements listed in this standard are type inspection items. Except for the "flash point" item in Table 1, which shall be inspected at least once a year, the rest are factory inspection items and must be inspected for each batch. 6.2 The product shall be inspected by the inspection department of the manufacturer in accordance with the provisions of this standard. The manufacturer shall ensure that all products leaving the factory meet the technical requirements of this standard. The product shall have a certificate of conformity and, if necessary, instructions for use and precautions. 6.3 The receiving department has the right to inspect the product in accordance with the provisions of this standard. If it is found that the product quality does not meet the technical indicators of this standard, the supplier and the buyer shall jointly re-sample and re-inspect in accordance with the provisions of GB3186. If the result still does not meet the technical indicators of this standard, the product shall be judged as unqualified and the receiving department shall have the right to return the product.
6.4 The product shall be sampled in accordance with the provisions of GB3186. The sample shall be divided into two parts, one for sealed storage for future reference and the other for inspection. 6.5 The supplier and the buyer shall inspect and check the product packaging, quantity and marking. If the packaging is damaged or the quantity is inconsistent, the relevant departments shall be notified in a timely manner.
6.6When the supply and demand parties have a dispute over product quality, they may entrust a unit or product quality supervision and inspection agency agreed by both parties to perform arbitration tests.
7 Marking, packaging, transportation, purchase and storage
The integrity of the leaking barrel and the barrel cover should be checked frequently during packaging, transportation and storage. 7.1 Marking
Perform in accordance with the provisions of GB/T9750.
7.2 Packaging
The product should be packaged in a clean, dry and sealed container, and the contents should account for 90-95% of the container volume. 7.3 Transportation
The product should be protected from rain and sunlight during transportation, and should comply with the relevant regulations of the transportation department. 7.4 Storage
The product should be stored in a cool, dry and ventilated warehouse, and should be protected from direct sunlight, isolated from fire sources and away from heat sources. Under the storage and transportation conditions of 7.2 and 7.3, the effective storage period of the product is one year from the date of completion of production. 8 Safety, hygiene and environmental protection
This product contains organic solvents such as benzene, esters and ketones, which are flammable, explosive and toxic substances. The construction site of this product should take safe and effective measures such as ventilation, fire prevention, anti-static and anti-toxic, and comply with the safe operation procedures and relevant regulations of coating operations.
WHG/T2596-94
Appendix A
Construction reference
(reference)
A1This product is suitable for spraying and is adjusted with X-3 perchloroethylene release agent. If it is constructed in an environment with a relative humidity of more than 70%, it is necessary to add an appropriate amount of F-2 perchloroethylene moisture-proof agent to prevent the paint film from turning white. A2This product is matched with primer and putty:
Primer: iron red perchloroethylene primer, iron red alkyd primer. Putty: perchloroethylene putty, fat glue putty. If the product exceeds the storage period, it can be retested according to the technical requirements specified in this standard. If the results meet the requirements, it can still be used. A3
Additional Notes:
This standard is proposed by the Technical Supervision Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Standardization of Paints and Pigments. The working group leader and drafting unit of this standard: Shanghai Paint Factory, Paint Research Institute of the Ministry of Chemical Industry. The main drafters of this standard are Fang Beili and Liu Jiyuan. 5
W.bzsosocom
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.