This part defines the terminology of special freight car accessories for railway vehicles. This part is applicable to standards, technical documents and scientific and technological publications related to railway vehicles. GB/T 4549.11-2004 Railway vehicle vocabulary Part 11: Special freight car accessories GB/T4549.11-2004 Standard download decompression password: www.bzxz.net

ICS 01.040.45,45.060.20
National Standard of the People's Republic of China
GB/T4549.11—2004
Replaces GB/T464U._1-4:9.141984
Railway vehicules vocabulary
Part 11: Equipment attached to the special purpose freight carPromulgated on 2004-06-11
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Administration of Standardization of the People's Republic of China
Implemented on 2004-12-01
C/T 4549.11—2004
Self-sleeper car
4 years
5 Insulated car
6 Container flat car
Special freight car with equipment equivalent technology certificate
Appendix 4 (Normative data)
CCTV
English
GB/T4549 online vehicle vocabulary is divided into 1 part: Part 1 basic vocabulary, Part 2: Running equipment, Part 3: Braking equipment, Part 4: Vehicle structure and support equipment, Part 5: Vehicle body!
: Part 6: Doors, windows and their closing devices; - Part 7: Heating, ventilation and air conditioning equipment: Part 8: Plumbing and drainage equipment:
Part 9: Electrical equipment:
Part 10: Passenger car accessories
Part 11: Special freight car accessories: This part is GB/T454% Part 11 of railway vehicle room, GB/T 4549.11--2QQ4
This part replaces CB/T455.1-1U84 railway single vehicle terminology full bucket car ancillary equipment, B/T4544.12-1084 railway car cabinet terminology understanding car ancillary equipment. GH/T4549.13-1954 railway vehicle terminology self-dumping car ancillary equipment GB/T1549.14-1S84 lock vehicle terminology insulation car ancillary equipment 3 The main changes in this part are as follows:
This part The original B14549.11-1984 railway vehicle terminology hopper car research equipment GB/T449.2-1984 express vehicle terminology bumper car accessory equipment GB/T4549.13-1984 railway vehicle terminology self-car accessory equipment B, T4549.14-934 railway vehicle terminology protection return car accessory equipment answer 3 were combined and modified into F
and "unloading equipment", "temperature trap", "safety attachment" and "air chamber" were added. "Moisturizing cabinet", "guide cabinet", "end ladder", "side ladder", "inner ladder", "air intake", "suppression room", "plan or need", "suppression time", "electrical vibration", "fuel loading and unloading", "machine room", "system room", "control room", "cargo room", etc.: Change the "liquid level indicator" to "volume sign", "oil pumping seat" to "non-oil general seat", add Chapter 6 container flat car"
add "cement end car air plan", "oil discharge notice", "internal heating and cooling" Reference drawings and equivalent terms +- "Self-turning car" adds reference drawings and equivalent terms of "rollover mechanism (2)", "tilting mechanism (3)" and tilting concentrated pressure device"; while the reference drawings and equivalent terms of "loss elimination system" are added to the reference drawings and equivalent terms of "cooling resistance device" and "fuel collection and lubricating oil device"; some equivalent terms such as "case loading flat car hook" and "nest loading flat car door stop" are added to the reference drawings and equivalent terms of "self-turning car"; except for the terms "generator room" and "power distribution rate", some parts drawings in the original standard are omitted. Appendix A of this part is a standard appendix. Appendix 4 gives some reference drawings and related English corresponding terms of the following devices: tank car, self-turning car; bucket car, insulated car: GB/T4549.11-2004 nest loading flat car.
This part was proposed by the Ministry of Railways of the People's Republic of China, and the content of this part belongs to the Standard Design Research Institute of the Ministry of Railways. The drafting units of this part are: Meishan Rolling Stock Works, Standard Design Research Institute of the Ministry of Railways, Xi'an Rolling Stock Works, Harbin Rolling Stock Works, Qiqihar Railway Rolling Stock (Group) Co., Ltd., Wulu Rolling Stock Works, Beiqiong Erqi Rolling Stock Works, and Taiyuan Locomotive and Rolling Stock Works. The main drafters of this part are: Xia Hong, Yun Ying, Xiao Peng, Sun Huiqi, Shang Jiangshi, Xia Minghui, Xia Shien, Lu Di, Ke Keqiu, and Zhang Xin. This part was first published in 1984, and this is the first revision. 1 Scope
Vocabulary of railway rolling stock
Part 11: Special freight car accessories
This part defines the terms of special freight car accessories for railway rolling stock, and standardizes the relevant standards, technical documents, scientific publications, etc. 2 train
unloading devicenuedin devine
The device that sieves small pieces, gas or powdery goods out of the tank is divided into upper unloading type and lower unloading type according to the unloading method. 2.2
Slean heating pipelines Use steam or other heat sources to heat the medium inside the tank so that it can pass smoothly through the pipelines. The hot steam passes through the heating pipeline into the external heating jacket of the tank for external heating of the tank. The steam or other heat sources pass into the internal disc-shaped exhaust pipe for internal heating of the tank. 2.3
Safety accessoriessafety accessories
CB/T 4549.112004
To ensure the safety of the auxiliary vehicle, safety chests, bursting discs, emergency shut-off devices, pressure gauges, concentration indicating devices, temperature measuring instruments, etc. are installed on the tank.
Air pressure room
A device that is installed on the cargo vehicle to promote low flow density of the cargo during cargo transportation. 2.5
Heat preservatinn deviceInsulation jacket (external insulation), insulation layer and other accessories are installed to keep the cargo at a certain temperature during transportation. The insulation method can be insulation material insulation or vacuum cross-heat insulation. 2.6
Liqaidguidingplxle
Guide plate to limit and guide the flow of liquid or bulk cargo in a certain direction. 2.7
BeadIedder
Fixed on the head of the tank body, for people to climb up to the preparatory part of the tank body. 2. Sideladderbzxz.net
Fixed on the middle of the tank body, for people to climb up to the top of the tank body. 2.9
Inner manhole
A ladder for people to enter the interior of the body from the manhole to work. GH/T 4549.11—2004
The bottom of the body is the bottom of the body. 2.11
The discharge pipe is the place where the liquid is pumped out.
Intake pipe
The passage for preventing the air from entering the body due to the deformation of the air. 2.13
Cortlugroom
A working and resting room set up on the vehicle for the personnel escorting the vehicle. 2. 14
Measuring device
Indicator and metering device.
Can be installed with narrow volume sign, metering closure, mobile pipe, product or effective metering meter. 2.15
Volume sign volameImilatinzplate is installed inside the storage, indicating the effective volume of the model. 2. 16
Total passenger volume lotalHparity
【The sum of the manhole (or air bag) and the volume of the vehicle. 2.17
Effective volume tertiarily
The volume below the allowable height marked on the volume sign (or other metering equipment): 2.18
volwmgalswlicntable
Passenger volume meter
A table indicating the capacity calculation.
Steam inlet static pressure skauiutokestnticpressure The steam pressure allowed by the pipeline is lower than the steam pressure allowed by the pipeline. 3. Self-turning car
Stalle (orSteady) distance The minimum distance between the cargo and the car body passing through the center of the rotating shaft and the plane. 3.2
Full opening angle fuuupnaueke
The angle between the floor and the horizontal plane when the car is fully opened. 3.3
Unloading angle self-cleaningdnmp ngle and unloading, the angle between the floor and the horizontal plane of the car 3.4
Real coefficient rese1 Eactor
The ratio of the force generated by the deadweight of the car when the car is in the same position to the force generated by the door closing, 2
Resistance
kappresingtoggle
Control and measure the opening and closing of the side door of the car. There are two types of long and short legs. Overturning mechanism dmmpingmechanichantgm
CB/T 4549.112004
Push can safely control the normal opening and closing of the side door of the vehicle: a set of machines with the functions of early door opening and early unloading, 4.2
Hand driving device handdrivingdevice
The transmission device that uses human power to open and close the bottom door: 4.3
Air control pipe device pneomatiecontrolpipeLntedericeThe pipeline device that supplies compressed air for the air transmission device. 4. 4
Changeovervalrechangeovervalre
The valve that switches the air passage.
application valve
controls the air flow to achieve the opening and closing of the valve, 4.6
air regulating valve adjusts the air entering the control pipe to a certain pressure. 4.7
alve fornlaading while maving enables unloading in the process of unloading: 4.8
direction cylinder
the cylinder that uses air as power to control the push and pull of the rod. 5. Refrigeration/heating equipment refrigeratlng/eating equipment control system, temperature control system and control system, 5. 2
fuel equipment
the device that provides fuel discharge for the oil-fired unit or the self-driven refrigeration unit. 5.3
Lubricating oil device
A device for adding and storing lubricating oil to a diesel engine or a direct-drive refrigeration unit. GB/T 4549.11-2004
Water-cooling deviceWater-cooling deviceCooling water circulation device for a water-cooled diesel engine, mainly including water supply, heat exchanger, air, etc. 5.5
Air-cooling deviceAir-cooling device
A cooling device for a water-cooled diesel engine or a refrigeration unit. Mainly including air, fan, etc. 5.6
Generator compartmentGenerator compartmentA compartment where a diesel engine and ancillary equipment are installed. 5.7
Trainman room
Room equipped with living facilities for crew members, including: - generally including toilet, sleeping room, meeting room, etc. 5.8
Control roomcomtrolrnmm
Room equipped with power distribution cabinet, control instrument, filter and control equipment 5.9
Freight cnmparipent
Room equipped with air circulation equipment for loading and unloading cargo. 5. 10
Moar rid
Facility installed on cargo board to protect cargo from moisture damage and form air circulation channel. 5. 11
Refrigeratoricebarpen
The main refrigeration device of the reverse refrigeration vehicle. Others include: refrigerator bracket and brine discharge pipe: 5. 12
freezing plate
refrigeration plate
refrigeration device that can circulate and store cold energy, 5.13
effective floor steel effectvetloorarea floor rent of the two ends of the cargo room and the side tower ventilation room of the protective vehicle 5.14
total passenger and total capacity
(protection vehicle) the product of the allowable pushing code business of the cargo room and the number of floor rents. 6 flat car
container flat car lock Iockatcontainerflatwagnzfree box flat car used to limit or fix the installation position. 6. E. 2
Fixed lock ftxingkock
Fixed directly on the chassis, used to limit the loading position, like a packing flat car pin, 5. 1, 3
Turanverlock
Turanverlock is a packing flat car lock that can be turned over. When in use, it is used to limit the position of the container; when not in use, it can be turned over to prevent it from affecting the loading of other goods.
Rotary Lnek
GB/T 4549.11—2QQ4
The lock head can be softly cut into the table packing flat car lock, when the lock is supported, the head rotates, and the head stops at the closed state, so as to set the limit pin to the packing function:
Extended Lock Juck
The retractable case packing flat car money, the lock is in the working position when in use; when not in use, the lock head is reliable and does not affect the loading of other goods.
Automatic Lock Antnmaticlock
When packing, it is automatically locked by the deadweight of the container, and the pin is opened with force. 6. 1. 7
semi-mechanical axle
semi-mechanical matkock
automatically locks and opens automatically when loading and unloading. 6. 1. B
combination lock combination lack
single-grid flat car hook composed of movable lock seat, lock head reverse connection parts and anti-lost head device. 6. 1. 9
fixed overlock case flat car lock with fixed lock seat and reversible lock head. 6. 1. 10
tarmoverandrotarylock
soft-operated box car with a reversible seat and a rotating head 6. 1.11
tarmover and antomatic lock
tarmover automatic lock
tarmover lock with a reversible seat and a self-locking pin, which can be opened 6. 1. 12
tarmover semi-automatic lock
tarmover lock with a reversible seat and a self-locking pin, which can be opened manually 6.2door stop
door stop door gtnp
tarmover lock is a device used to prevent the door from being opened during container transportation. 6. 2. 2
fixingduurSlup
Fixed door stop
Door stop directly fixed on the frame
moveable door stop
When in use, the door stop covers the working position to stop the box door from being opened during the packing process. When not in use, it is converted into a door stop so as not to affect the loading of other goods.
Turn over door stop
Turn over door stop
The door stop is fixed on the stand and the door stop is rotated. When in use, the door stop should be placed in the working position and packed in the box during transportation. The door should not be opened. The rotating door stop should be fixed so that it does not affect the rotation of other objects. 5
GB/T 4549.11—2004
A. 1 Maintenance vehicle
4 1. 1 Oil discharge device
Appendix A
(Regulatory appendix)
Equivalent terms for auxiliary equipment of special trucks
Relevant reference drawings of oil discharge device Figure 1 Equivalent terms for oil discharge device See Table A, Figure a.A. 1.2 Heating pipeline
For the relevant reference drawings of heating pipelines, see Figure A.2. For the equivalent terms of heating pipelines, see Table A.2. Figure A.2
Table A,2
Drain oil cliff
Drain oil push head difference
Three marriage heart
slecaacket
gls:m inlrt rijx.
nil pu=let value sear
oil ou-let egree'nr. can
drain pipo
e pire
Ertong fee Jiapinda gas branch
such as along the school belt
Zhang gas main
Add water hall
GB/T 4549.11—2004
hretch stsem pips linking witb tre pixe itcam jackecaprhgin
Taain Etogm zinc oorer
maja A1.3 Internal heating pipe
For the reference diagram of internal heating pipe, see Figure A3. For the equivalent terms of internal heating pipe, see Table A.3. A.3 Internal heating pipe
Intake pipe
Oil drain pipe
Exhaust pipe
Exhaust pipe
Exhaust pipe
Cap ehein
amnrsr
iusife ateaun heating pipe LuesSranch srnm rif-
oil cutlet ralve sesd
mountain ai:tpipe
cil eutler eonneeriort esr
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.