This standard applies to the compressed packaging of light-foam Chinese herbal medicines for domestic circulation. GB 6265-1986 Chinese herbal medicine compressed packaging for transportation GB6265-1986 standard download decompression password: www.bzxz.net

National Standard of the People's Republic of China
Chinese herbal medicine compressed package for transport
Chinese herbal medicine compressed package for transport This standard applies to compressed and packaged light and foamed Chinese herbal medicine for domestic circulation. Specifications of the compression baler chassis
UDC582:615.32
GB6265—86
The inner diameter of the compression baler chassis and the maximum size of the shrink packaging should comply with the provisions of Table 1. Table 1
Standard box size
Reserved box size,
Reserved box size,
Reserved box size
Reserved box size
Inner diameter of chassis
760×340
950×340
760×440
820×500
850×400
Specification of compressed package
800×400
1000×400
800×500
860×540
900×450
Method: Specification of compressed package refers to the size measured 24 hours after packaging. Standard box size should be used first. 2
Packaging materials
Wrapping and tying materials shall comply with the provisions of Table 2. Table 2
Shuangbao materials
Material name
Plastic braiding
*Should be used first when using the reserved box size. National Bureau of Standards 1986-04-18 Issued
Technical requirements
Conform to the technical requirements of GB736-81
Conform to the technical requirements of GB406-78
1986-12-01 Implementation
Tying materials
Moisture-proof materials
Suture materials
2.2 Support materials for attachment
GB6265-86
Continued Table 2
Material name
Palm rope||t t||Iron wire
Moisture-proof paper
Technical requirements
Rope made of three strands, diameter 6~7mm
Rope made of "general expansion, true diameter 6~7mm
Conform to GB3084-82#10, #12, low carbon steel galvanized steel wire can play a moisture-proof role, clean and not pollute medicinal materials: Machine wire made of: strands, diameter 2~3mm2.2.1 Plywood is made of bamboo pieces, strips, purple locust strips or other materials of the most equivalent quality. The side length of the fire board should be less than the corresponding box inner diameter of 40mm.
2.2.2 When plywood is not used, bamboo pieces of appropriate length are placed on the upper and lower sides of the package, with a width of 30mm and a thickness of 4~6mm. The diameter of the vitex and purple locust strips is 8mm or more.
2.3 Packaging materials should be dry, free of insects, and will not affect the quality of medicinal materials. 3 Technical requirements
3.11 The net weight of the shrink-wrapped medicinal materials is divided into five weight numbers: 20, 30, 40, 50, and 60 kg. 3.2 The supporting materials used should be placed between the wrapping materials and the moisture-proof materials. 3.3 When the medicinal materials are compressed into packages, the packages should be tightly packed according to the properties of the medicinal materials while ensuring the quality requirements. 3.4 Requirements for the tying of packages
3.4.1 The packages are tied with ropes or iron wires for 5 to 7 turns horizontally, and the knots are tied and locked to prevent slipping and loosening. 3.4.2
The seams of the wrapping materials are sewn with hemp thread, and the stitch length is not more than 20 mm. 3.4.3 The appearance of the package should be neat on all six sides and full on the octagonal part, and the goods should not be exposed. 4 Marking
4.1 Shipping and Receiving Marking
4.1.1 Shipping and Receiving Marking Items11 include: transport number, product name, number of shipments, destination station, receiving and shipping units, and departure station. They shall be pasted or arranged on both ends of the package.
4.1.2 Text and graphic items1 on the package include: pharmaceutical classification mark, product name, specification (grade), gross weight, net weight, origin and packaging unit, and period.
4.2 Packing and storage graphic markings shall be handled in accordance with the provisions of GB191-85 "Packaging Storage and Transportation Graphic Marking". 5 Others
5.1 For shrink packaging, the moisture content of medicinal materials shall comply with relevant national regulations. 5.2 Each package shall be accompanied by a medicinal material quality certificate. 5.3 When using standard box type compression packaging, the weight, compression height, internal materials, supporting materials, and density of each Chinese herbal medicine are shown in Table 3. When using the reserved box type compression packaging, except for the weight and compression height of each Chinese herbal medicine, the rest of the requirements of Table 3 shall be followed. The weight change shall comply with 3.1. After the weight and compression height change, the density of the compressed package should be the same as the density of the standard box type, with an error of no more than 10%. Requirements for weight and lining
Table 3 Varieties and weight of compressed packaging
Name of medicinal material
Sauryleaf spatholobi
Honeysuckle
\Touweng
Loquat leaf
Chuanzuokexi
Plantago
Liu Duxiao
Fording tablets
*Density difference is +10%bZxz.net
Height after packaging
Inner material
Supporting material
Moisture-proof material
Add moisture-proof paper
Add moisture-proof paper
Add support
Add support
Add support
Shenzhen support
Shenzhen support
Support
Add! Support
Shenzhen support
Add support
Add support
Density*
Medicinal material name
Aquilaria sinensis
Mulberry bark
Dandelion
Shiwanpu
Sea palm bark
*Density error is above 10%.
GB 6265-86
Continued Table 3
Height after packaging
Moisture-proof material
Add moisture-proof paper
Supporting material
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
||Add support
Add support
Add support
Density*
Medicinal material name
Ginseng leaf
Moneywort
Oroxylum
Greasegrass
Perilla leaf
Perilla stem
Imperata root
Hedton diffusa
Scutellaria barbata
Pendula officinalis
Old Guancao
Albizzia julibrissinica
Celosia cristata
*Density error is ±10%.
GB6265-86
Continued Table 3
Height after packaging
Moisture-proof material
Supporting material
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Add support
Name of medicinal materials
Lobumahu
Yuejiaoteng
Weidingxian
Chuanxinfeng
Vortex motherwort
Light bamboo leaf
Stretching tendon grass
*Density error is ±10%.
GB6265-86
Continued Table 3
Height after packaging
Moisture-proof material
Add moisture-proof paper
Supporting material
Add support
Add support
Add support
Add support
Add support
Density*
Name of medicinal materials
Winter melon peel
Sea breeze vine
Scarce stigma
Isatis indigotica
Villaria parasiticus
Melon wilt peel
Patrimonium wilfordii
Black grass
Dwarf tea
*The density error is ±10%.
GB6265-86
Continued Table 3
Height after packaging
Inner village materials
Moisture-proof material
Add moisture-proof paper
Supporting materials
Add support
Add support
Add support
Add support
Add support
Add support
Density*
Name of medicinal materials
Lugen tablets
Epiphysalis
Juncus effusus
Xanthium sibiricum
Echinochloa crus-galli
Big stretch tendon
Equisetum equisetum
Luffa
Adenophora adenophora
*The density error is ±10%.
GB6265-86
Continued Table 3
Height after packing
Inner lining material
Moisture-proof material
Supporting material
Add support
Add support
Add support
Add support
Add support
Add support
Density*
Additional remarks:
This standard is proposed by the State Drug Administration. GB6265-86
This standard is drafted by Beijing Medicinal Materials Company and Hunan Medicinal Materials Company. The main drafters of this standard are Wang Zixin, Wang Qinghua, Shen Jiapeng and Cao Shikui. 225
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.