GB/T 5641.1-1985 Flared cross pipe joints
Basic Information
Standard ID:
GB/T 5641.1-1985
Standard Name: Flared cross pipe joints
Chinese Name:
扩口式四通管接头
Standard category:National Standard (GB)
state:Abolished
Date of Release1985-01-01
Date of Implementation:1986-09-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:Fluid systems and general parts>>Pipeline components and pipelines>>23.040.60 Flanges, pipe joints and connecting parts
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1986-09-01
other information
Release date:1985-11-25
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 5641.1-1985 Flared Cross Pipe Fittings GB/T5641.1-1985 Standard Download Decompression Password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Flared type tube fittings-
Union cross-Assembly
This standard applies to flared type tube fittings for use in piping systems using oil and gas as the medium. 2L
GE 5641.2
GB5647-
Marking example:
Flared cross pipe joint with outer diameter of 10mm Pipe joint 10GB5641.1—85
National Bureau of Standards 1986-11-25 Issued
UDC621.648.4
GB 5641.185
GB 5646
1986-08-01 Implementation
Pipe outer diameter
M16 × 1.5
M18 ×1.5
M 22 × 1. 5
M24 × 1. 5bZxz.net
M30×2
M33 × 2
M36×2
M39×2
M42×2
GB 5641,185
Technical conditions shall be in accordance with the provisions of GB5653-85 "Technical conditions for flared pipe joints". s.
Additional remarks:
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. S
Material (steel)
kg/100 pieces
This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, Shanghai Hydraulic Accessories Factory, Changchun Automobile Research Institute, and Shanghai Hydraulic and Pneumatic Research Institute.
The main drafters of this standard are Hu Lusheng, Li Ningning, and Zhang Qianlong. From the date of implementation of this standard, the original Ministry standard JB1906-77 "Flared Cross Pipe Joint" shall be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.