title>JB/T 6144.1-1992 Cone Sealing Hose Assembly Cone Joint - JB/T 6144.1-1992 - Chinese standardNet - bzxz.net
Home > JB > JB/T 6144.1-1992 Cone Sealing Hose Assembly Cone Joint
JB/T 6144.1-1992 Cone Sealing Hose Assembly Cone Joint

Basic Information

Standard ID: JB/T 6144.1-1992

Standard Name: Cone Sealing Hose Assembly Cone Joint

Chinese Name: 锥密封胶管总成 锥接头

Standard category:Machinery Industry Standard (JB)

state:Abolished

Date of Release1992-06-09

Date of Implementation:1993-01-01

Date of Expiration:2007-09-01

standard classification number

Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories

associated standards

alternative situation:Replaced by JB/T 6144.1-2007

Procurement status:neq ISO 8434:1986E

Publication information

publishing house:Mechanical Industry Press

other information

Focal point unit:Xi'an Heavy Machinery Research Institute

Introduction to standards:

This standard specifies the classification of cone joints of cone sealing hose assemblies. JB/T 6144.1-1992 Cone joints of cone sealing hose assemblies JB/T6144.1-1992 Standard download decompression password: www.bzxz.net

Some standard content:

Mechanical Industry Standard of the People's Republic of China
JB/T6144.1-1992
Conical Sealing Hose Assembly
Conical Joint
Published on 1992-06-09
Implementation by the Ministry of Machinery and Electronics Industry of the People's Republic of China on 1993-01-01
Mechanical Industry Standard of the People's Republic of China
Conical Sealing Hose Assembly
Conical Joint
Subject Content and Scope of Application
This standard specifies the classification of cone joints of cone sealing hose assemblies. This standard is applicable to cone joints of cone sealing hose assemblies with oil and water as the medium. This standard is used in conjunction with cone sealing hose assemblies. 2 Reference standards
GB1047
GB1414
GB2878
JB/T6145
3 Product categories
Nominal diameter of pipes and pipeline accessories
Ordinary thread size series for pipeline screw-in endsHydraulic and pneumatic systems and componentsOil and gas port connection thread sizeCombined sealing washers
Steel wire and cotton braided hose assemblies
Technical conditions
The dimensional parameters of cone joints of cone sealing hose assemblies shall be as specified in the drawings and tables. 0
1992-06-09 Approved by the Ministry of Machinery and Electronics Industry JB/T6144.1-1992
1993-01-01 Implementation
Nominal diameter DN
M10×1
M10×1
M27×2
M33×2
M42×2
M48×2
M60×2
Product marking method
Cone joint
3.3 Marking example
M30×2
M33×2
M36×2
M42×2
M52×2
M56×2
M64×2
JB/T6144.1 -1992
JB/T6144.1wwW.bzxz.Net
Standard No.
Connecting Thread
Nominal Diameter, mm
Product Name
Conical Sealing Hose Assembly Conical Joint with Nominal Diameter D%=6, Connecting Thread d,=M18×1.5: Conical Joint
Technical Conditions
6-M18x 1.5
JB/T6144.1
Technical Conditions shall be in accordance with the provisions of JB/T6145.
Additional Notes:
This standard was proposed and managed by the Xi'an Heavy Machinery Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Xi'an Heavy Machinery Research Institute of the Ministry of Machinery and Electronics Industry. The main drafter of this standard is Qi Dingshun.
Recommended
Combined sealing gasket
(JB982)
People's Republic of China
Mechanical industry standard
Cone sealing hose assembly
Cone joint
JB/T 6144.1 - 1992
Published by the Mechanical Science Research Institute
Printed by the Mechanical Science Research Institute
(No. 2, Shouti South Road, Beijing
Format 880x1230
Postal Code 100044)
Print Sheet 1/4
Word Count 4,000
First Edition October 1992
First Printing October 1992
Print Quantity 1-500
Price 0.80 Yuan
Mechanical Industry Standard Service Network: http://www.JB.ac.cn2661 - 1t19 /
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.