This part of GB/T27050 specifies the general requirements for supporting documents to verify the supplier's declaration of conformity as described in GB/T 27050.1. In this part of GB/T 27050, the object of the declaration of conformity can be a product, process, management system, person or organization. GB/T 27050.2-2006 Conformity assessment supplier's declaration of conformity Part 2: Supporting documents GB/T27050.2-2006 Standard download decompression password: www.bzxz.net
This part of GB/T27050 specifies the general requirements for supporting documents to verify the supplier's declaration of conformity as described in GB/T 27050.1. In this part of GB/T 27050, the object of the declaration of conformity can be a product, process, management system, person or organization.
This standard is equivalent to ISO/IEC 17050-2:2004 "Conformity assessment - Supplier's declaration of conformity - Part 2: Supporting documents".
This standard is proposed and managed by the National Technical Committee for Certification and Accreditation of Standardization (SAC/TC 261).
Drafting unit of this standard: China Quality Certification Center
Main drafters of this standard: Lu Mei, Zhao Zhiwei, Wang Keqin, Bing Xuwei, Xia Jianjun, Zhang Shaojun, Zhao Jiarui, Liu Xiaohong, Jiang Wenbo, Cao Shi, Shen Jun.

GB/T 27000 Conformity assessment vocabulary and general principles (GB/T 27000-2006, ISO/IEC 17000:2004, IDT)
GB/T 27050.1-2006 Conformity assessment supplier's declaration of conformity Part 1: General requirements (ISO/IEC 17050-1:2004, IDT)
Foreword III
ISO/IEC Foreword IV
Introduction V
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 General requirements 1
5 Contents of supporting documents 1

ICS03.120.20
National Standard of the People's Republic of China
GB/T27050.2—2006/IS0/IEC17050-2:2004Conformity assessment
Supplier's declaration of conformity
Part 2:Supporting documentation
Conformity assessment--Supplier's declaration of conformity-Part 2:Supporting documentation(ISO/IEC17050-2:2004,IDT)
Published on September 4, 2006
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Administration of Standardization of the People's Republic of China
Digital anti-counterfeiting
Implementation on April 1, 2007
ISO/IECForeword
1 Scope
Normative references
Terms and definitions| |tt||General requirements
Contents of supporting documents
GB/T27050.2—2006/IS0/IEC17050-2:2004
GB/T27050.2—2006/IS0/IEC17050-2:2004Foreword
This standard is equivalent to ISO/IEC17050-2:2004 "Conformity assessment - Supplier's declaration of conformity - Part 2: Supporting documents".
This standard is proposed and managed by the National Technical Committee for the Promotion of Certification and Accreditation Standards. The responsible drafting unit of this standard: China Quality Certification Center. Participating drafting units of this standard: National Certification and Accreditation Administration, China Household Electrical Appliances Research Institute, Guangzhou Daily Electrical Appliances Testing Institute, Shenzhen Electronic Product Quality Testing Center, China National Laboratory Accreditation Administration, Haier Group, China National Accreditation Service for Conformity Assessment. The main drafters of this standard are: Lu Mei, Shen Jun, Xia Jianjun, Wang Keqin, Xu Wei, Cao Shi, Zhang Shaojun, Zhao Jiarui, Liu Xiaohong, Zhao Zhiwei, Jiang Wenbo.
GB/T27050.2—2006/ISO/IEC17050-2:2004ISO/IEC Foreword
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) have established a professional system for global standardization. The national member bodies of ISO and IEC participate in the formulation of international standards through technical committees established by ISO and IEC for technical activities in specific fields. The technical committees of ISO and IEC cooperate in areas of common interest. Other governmental and non-governmental international organizations that maintain liaison with ISO and IEC also participate in this work. In the field of conformity assessment, ISO's Conformity Assessment Committee (CASCO) is responsible for the formulation of international standards and guidelines.
International standards are drafted according to the rules in Part 2 of the ISO/IEC Directives. Draft international standards are circulated to national member bodies for voting. Draft international standards are published as international standards only if they are approved by at least 75% of the national member bodies voting on them. Attention should be drawn to the fact that some of the contents of this standard may involve patent rights. The International Organization for Standardization (ISO) shall not be held responsible for identifying any such patent rights.
ISO/IEC 17050-2 was prepared by the ISO Committee on Conformity Assessment (CASCO). This standard was reviewed and voted on by the national member bodies of ISO and IEC and approved by both organizations. ISO/IEC 17050-2, together with the first edition of ISO/IEC 17050-1, replaces ISO/IEC Guide 22 (1996) "General criteria for supplier's declaration of conformity", the second edition, and Guide 22 is cancelled. Under the general title of "Conformity assessment - supplier's declaration of conformity", ISO/IEC 17050 consists of the following two parts: - Part 1: General requirements;
- Part 2: Supporting documents.
GB/T27050.2--2006/IS0/IEC17050-2:2004
The supplier's declaration of conformity is a form of proof of conformity in order to meet the requirements of the market and regulatory authorities or institutions and gain their trust. Maintaining and providing documented information as the basis for the supplier's declaration when required can improve the acceptance of the supplier's declaration of conformity. This part of GB/T27050 specifies the requirements for supporting documents for the supplier's declaration of conformity. In addition to enhancing the trust in the supplier's declaration of conformity, these documents can also provide assistance to relevant government departments in their supervision activities. Regardless of the industry involved, suppliers may be required to have the responsibility to strictly verify the compliance of products (including services), processes, management systems, personnel or institutions with specified requirements (which may include normative documents such as standards, guidelines, technical specifications, laws and regulations). 1 Scope
GB/T27050.2-2006/1S0/IEC17050-2:2004 Conformity assessment Supplier's declaration of conformity
Part 2: Supporting documents
This part of GB/T27050 specifies the general requirements for supporting documents to substantiate the supplier's declaration of conformity as described in GB/T27050.1.
In this part of GB/T27050, the object of the declaration of conformity may be a product, process, management system, person or organization. Where appropriate, "declaration of conformity" may be used instead of "supplier's declaration of conformity". 2 Normative references
The following references are indispensable for the application of this standard. For dated references, only the version mentioned applies. For undated references, the latest version of the referenced document (including all its amendments) applies. GB/T27000—2006 Conformity assessment vocabulary and general principles (ISO/IEC17000:2004, IDT) GB/T27050.1—2006 Conformity assessment supplier's declaration of conformity Part 1: General requirements (ISO/IEC17050-1:2004, IDT)
3 Terms and definitions
The terms and definitions given in GB/T27000—2006 apply to this part of GB/T27050. Note 1: "Supplier's declaration of conformity" refers to the "declaration" defined in GB/T27000-2006, that is, the first-party certification. Note 2: In order to avoid confusion with the certification made by the certification body, the term "self-certification" is not recommended and should not be used. 4 General requirementsbZxz.net
4.1 Traceability
Supporting documents should be prepared, preserved, controlled and maintained in a manner that allows the supplier's declaration of conformity to be traced back. 4.2 Availability
The issuer of the declaration of conformity (the organization or person issuing the declaration) shall make supporting documents available to the relevant regulatory authorities or bodies as required to the extent necessary to meet regulatory requirements. The issuer may make supporting documents available to any other person or body who requests them.
4.3 Retention period
The retention period for supporting documents shall be in accordance with the requirements of applicable laws and regulations, but the issuer may specify a longer retention period. The specific needs of customers and other stakeholders should be considered. 5 Contents of supporting documents
5.1 Where applicable, supporting documentation shall include the following information to demonstrate conformity with the claimed requirements (see GB/T 27050.1-2006, Chapter 6 and Appendix A):
a) description of the object of the claim (product, process, management system, person or organization); design documents (e.g. instructions, diagrams, drawings, identification of professional areas and capabilities, specifications); b) i) results of conformity assessment, such as:
a) a description of the methods used (e.g. audit, audit procedure, batch testing, design review, design verification, design confirmation, inspection, sampling plan, series testing, test methods, type testing) and the reasons for their selection: 1
GB/T 27050.2—2006/ISO/IEC17050-2:2004 results (e.g. audit report, test report); and evaluation of the results (including deviations and concessions). d) Identification information, relevant qualifications and technical capabilities of the first, second or third party conformity assessment bodies involved, and detailed information on their accreditation status (e.g. scope of accreditation, name of accreditation body). When it is necessary to demonstrate that the object meets the declared requirements, the following should also be included: 5.2
a) Description of the management system related to the declared object; b) Other relevant information (e.g. risk analysis, reassessment procedures and planned arrangements). When changes to the supporting documents described in 5.1 and 5.2 affect the validity of the declaration of conformity, the changes should be documented. 5.3
GB/T27050.2-2006
National Standard of the People's Republic of China
Conformity Assessment Supplier's Declaration of Conformity
Part 2: Supporting Documents
GB/T27050.2—2006/1SO/IEC17050-2:2004*
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal Code: 100045
Website: spc.net.cn| |tt||Tel: 6852394668517548
Printed by Qinhuangdao Printing Factory of China Standard Press Distributed by Xinhua Bookstores in various places
Format 880×12301/16
Printing sheet 0.75 Word count 7,000 words
First edition in November 2006
First printing in November 2006
If there is any printing error, the distribution center of our company will replace it. Copyright infringement will be investigated
Report telephone: (010) 68533533
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.