JB/T 3108-1999 JB/T 3108-1999 Single-axis woodworking milling machine parameters JB/T3108-1999 Standard download decompression password: www.bzxz.net

ICS79.120.10
Machinery Industry Standard of the People's Republic of China
JB/T3108—1999
Single-axis woodworking milling machine
Published on May 14, 1999
National Bureau of Machinery Industry
Implemented on January 1, 2000
JB/T3108—1999
This standard is a revision of JB310882 "Single-axis woodworking milling machine parameters". During the revision, only editorial changes were made according to relevant regulations. The technical content has not changed
This standard replaces JB3108—82 from the date of implementation. Appendix A of this standard is a prompt appendix.
This standard was proposed by the National Technical Committee for Standardization of Woodworking Machine Tools and Cutting Tools. This standard is under the jurisdiction of Fuzhou Woodworking Machine Tool Research Institute. The responsible drafting unit of this standard: Mudanjiang Woodworking Machinery Factory. The main drafters of this standard: Dong Yanwen, Luan Jingkun This standard was first issued on May 12, 1982. 1
Machinery Industry Standard of the People's Republic of China
Single-axis woodworking milling machine
This standard specifies the parameters of single-axis woodworking milling machine. This standard is applicable to single-axis woodworking milling machine.
JB/T3108-1999
Replaces JB310882
The type of single-axis woodworking milling machine is shown in Figure 1 (without limiting the specific structure), and the parameters should comply with the provisions of Table 1.
a) Single-spindle woodworking milling machine without auxiliary worktable b) Single-spindle woodworking milling machine with auxiliary worktable
Table 1 Main parameters of single-spindle woodworking milling machine
Main parameter name
Maximum milling height H
Approved by the State Machinery Industry Bureau on May 14, 1999 ≥60
≥120
Implementation on January 1, 2000
JB/T3108-1999
Appendix A
(Suggestive appendix)
Other basic parameters of single-spindle woodworking milling machine
Other basic parameters of single-spindle woodworking milling machine are shown in Table A1. Table Al
Parameter name
Maximum milling height H
Workbench length L
Workbench width B
≥120
Mechanical industry standard
Single-axis woodworking milling machine parameters
JB/T3108-1999
Published and distributed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing sheet 1/2 Number of words 6000
Format 880×1230
First printing in August 1999
First edition in August 1999wwW.bzxz.Net
Print number 1-500
Price 500 yuan
99-366
66680 /
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.