GB 16196-1996 Hygienic standard for condensed silica dust in workshop air
Basic Information
Standard ID:
GB 16196-1996
Standard Name: Hygienic standard for condensed silica dust in workshop air
Chinese Name:
车间空气中凝聚二氧化硅粉尘卫生标准
Standard category:National Standard (GB)
state:in force
Date of Release1996-04-03
Date of Implementation:1996-09-01
standard classification number
Standard ICS number:Environmental protection, health and safety>>Air quality>>13.040.30 Air quality in the workplace
Standard Classification Number:Medicine, Health, Labor Protection>>Health>>C52 Labor Hygiene
associated standards
Publication information
other information
Release date:1996-04-03
Review date:2004-10-14
Drafting unit:Shanghai Labor Hygiene and Occupational Disease Prevention and Control Institute
Focal point unit:Ministry of Health
Publishing department:State Bureau of Technical Supervision
competent authority:Ministry of Health
Introduction to standards:
This standard specifies the maximum permissible concentration of condensed silica dust in workshop air and its monitoring and inspection methods. This standard applies to industrial production processes that can produce quartz vapor condensate smoke and dust, and processes that use silicon tetrachloride high temperature hydrolysis to produce far ultraviolet quartz glass, optical fiber and other materials. GB 16196-1996 Hygienic Standard for Condensed Silica Dust in Workshop Air GB16196-1996 Standard Download Decompression Password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Health standard for condensed silica dust in the air of workplace
1 Subject content and scope of application
GB16196—1996
This standard specifies the maximum permissible concentration of condensed silica dust in the air of workplace and its monitoring and inspection methods. This standard applies to the process that can produce quartz vapor condensate smoke in industrial production and the process of producing far-ultraviolet quartz glass, optical fiber and other materials by high-temperature hydrolysis of silicon tetrachloride. 2 Reference standards
GB5748 Determination method of dust in workplace air 3 Hygienic requirements
The maximum permissible concentration of condensed silica dust in the air of workplace is 3mg/m3. 4 Monitoring and inspection methods
The determination of condensed silica dust concentration and free silica content in the air of workplace shall be carried out in accordance with GB5748. 5 Supervision and implementationbzxz.net
Health and epidemic prevention agencies at all levels are responsible for supervising the implementation of this standard. Additional Notes:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by the Shanghai Institute of Labor Hygiene and Occupational Disease Prevention and Control. The main drafters of this standard were Lu Zhiying and Hu Tianxi. This standard was interpreted by the Institute of Labor Hygiene and Occupational Diseases of the Chinese Academy of Preventive Medicine, the technical unit entrusted by the Ministry of Health. Approved by the State Administration of Technical Supervision on April 3, 19962.
Implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.