GB/T 8804.2-2003 Determination of tensile properties of thermoplastic pipes Part 2: Unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) and high impact polyvinyl chloride (PVC-HI) pipes
Basic Information
Standard ID:
GB/T 8804.2-2003
Standard Name: Determination of tensile properties of thermoplastic pipes Part 2: Unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) and high impact polyvinyl chloride (PVC-HI) pipes
Chinese Name:
热塑性塑料管材 拉伸性能测定 第2部分:硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材
Standard category:National Standard (GB)
state:in force
Date of Release2003-03-05
Date of Implementation:2003-08-01
standard classification number
Standard ICS number:Rubber and plastics industry>>Rubber and plastic products>>83.140.30 Plastic pipes, fittings and valves
Standard Classification Number:Medicine, Health, Labor Protection>>Medical Devices>>C33 Dental Devices, Equipment and Materials
associated standards
alternative situation:GB/T 8804.1-1988
Procurement status:ISO 6259.2-1997, IDT
Publication information
publishing house:China Standards Press
ISBN:155066.1-19660
Publication date:2003-08-01
other information
Release date:1988-02-13
Review date:2004-10-14
drafter:Gao Jinyu, Zhou Lingren, Wei Zuoyou
Drafting unit:Huaya Wuhu Plastic Co., Ltd.
Focal point unit:National Technical Committee for Standardization of Plastic Products
Proposing unit:National Light Industry Federation
Publishing department:General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
competent authority:China Light Industry Federation
Introduction to standards:
This standard specifies the test methods for tensile properties, especially tensile yield stress and elongation at break. This standard is applicable to PVC-U, PVC-C and PVC-HI pipes for various purposes. S GB/T 8804.2-2003 Determination of tensile properties of thermoplastic pipes Part 2: Unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) and high impact polyvinyl chloride (PVC-HI) pipes GB/T8804.2-2003 Standard download decompression password: www.bzxz.net
Some standard content:
GB/T8804-2003 Thermoplastic monolithic pipe tensile properties determination 3 is divided into three parts: Part 1: General principles of test force method, Part 2: Hardness test of polyvinyl chloride (PVC-U), polyvinyl chloride (PVCC) and high impact polyvinyl chloride (PVC-HT) pipes, Part 3: Olefin pipes. This part is the second part of GB/18804-2013. This part is equivalent to [S06259-2:1997 Determination of tensile properties of thermoplastic materials Part 2: Rigid polyvinyl chloride (FVC-L), fluorinated polyvinyl chloride (VC-C) and high impact polyvinyl fluoride (PVC-H1) pipes 3 (English version)
This part removes the wide material appendix A, appendix B, appendix C and appendix D in ISO6259-217. The main changes compared with (GB/8804.1-1988) are as follows: 1. Added oxidized polyvinyl chloride (PVC-C) and high impact polyvinyl fluoride (PVC-HI) pipe tensile properties: 2. The width of the half-line part of the specimen is changed from 5mm±0.4mm to 6+9mm; 3. The test ramp is changed from 5mm/min±1mm/min 5mm/mia=0.5mm/r.in, added "original Jin\ one element,
This part replaces GB/T980-.1-1958 from the date of application. The National Light Industry Low-cost Association issued the standard.
This standard belongs to the National Plastic Products Standardization Committee. Kongdu Fenchong Huaya Wuyue Plastic Co., Ltd. is responsible for the drafting, and Fu Jianyan Tong New Materials Science and Technology Investment Co., Ltd. is responsible for the drafting. The main drafters of this part are Gao Cuyu and Shang Hanwei Zuofa. 1
1 Fan Guo
Determination of tensile properties of thermoplastic plastic fibers
Part 2: Hard polyoxyethylene (PVC-U), oxidized polyfluoroethylene (PC-C) and high impact polyoxyethylene (PVC-H pipes
CD/T 8804.2—2003Www.bzxZ.net
The wood part of GB/T8804 specifies the test method for tensile properties of hard polyvinyl chloride (PV), chlorinated polyvinyl chloride (PVCC) and high-resistance polyvinyl chloride [PVC-H] thermoplastic materials. The following properties are especially tested: - tensile yield stress!
breaking length,
wood is applicable to various types of fluoroethylene (FVC-), chlorinated fluoroethylene
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.