BB 0005-1995 Labelling of aerosol products
Basic Information
Standard ID:
BB 0005-1995
Standard Name: Labelling of aerosol products
Chinese Name:
气雾剂产品标示
Standard category:Packaging Industry Standard (BB)
state:Abolished
Date of Release1995-04-03
Date of Implementation:1995-06-01
Date of Expiration:2011-04-01
standard classification number
Standard ICS number:Packaging and transportation of goods>>55.020 Packaging and transportation of goods
Standard Classification Number:Comprehensive>>Marking, packaging, transportation, storage>>A88 packaging printing, sealing, labeling
Publication information
publishing house:China Standards Press
Publication date:1995-06-01
other information
drafter:Yip Kwok-heng, Wu Chi-kin, Yu Meng-cheng, Peng Hung, Wong Fujiet
Drafting unit:Zhongshan Kaida Fine Chemical Co., Ltd.
Focal point unit:National Packaging Standardization Technical Committee
Proposing unit:China Packaging Corporation
Publishing department:China Packaging Corporation
Introduction to standards:
This standard specifies the basic requirements for the labeling of aerosol products. This standard applies to aerosol products that are directly printed or pasted on aerosol packaging containers. BB 0005-1995 Aerosol Product Labeling BB0005-1995 Standard download decompression password: www.bzxz.net
This standard specifies the basic requirements for the labeling of aerosol products.
This standard applies to aerosol products that are directly printed or pasted on aerosol packaging containers.
Some standard content:
Packaging Industry Standard of the People's Republic of China
Product Labeling
Aerosol Products
1 Subject Content and Scope of Application
This standard specifies the basic requirements for the labeling of aerosol products. This standard applies to aerosol products that are directly printed or pasted on aerosol packaging containers. 2 Labeling Requirements
2.1 The labeling must comply with the requirements of the laws and regulations of the relevant national administrative departments. BB0005-95
2.2 The labeling consists of text, graphics and Arabic numerals. The labeling content must be expressed in Chinese and be eye-catching and clear. 3 Labeling Content
General Labeling
Product name, manufacturer's name and address, trademark, net weight or net capacity, product use and instructions for use. For products with a limited use period, the shelf life, production date or production batch number, and limited use date must be indicated. Products that require a production license, health license, product registration number, etc. should be marked with the corresponding certificate number. d. Products that are toxic to humans and animals should have corresponding instructions. Flammable products should be marked with "flammable". e.bZxz.net
3.2 Characteristic marking
The product must not be impacted; it should be used away from fire. a.
The product should be stored in a dry and ventilated environment with a temperature below 50°C. It should be kept away from direct sunlight and away from fire and heat sources. The product should be kept out of the reach of children.
Do not puncture or throw the product or empty cans into fire. Disposable aerosol packaging containers must not be refilled. Additional notes:
This standard was proposed by China National Packaging Corporation. This standard is under the jurisdiction of the National Packaging Standardization Technical Committee. This standard was drafted by Zhongshan Kaida Fine Chemical Co., Ltd. The main drafters of this standard are Ye Guoheng, Wu Zhijian, Yu Mengcheng, Peng Hong, and Huang Fujie. Approved by China National Packaging Corporation on April 3, 1995 and implemented on June 1, 1995
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.