GB/T 2861.16-1990 Die guide plate
Basic Information
Standard ID:
GB/T 2861.16-1990
Standard Name: Die guide plate
Chinese Name:
冲模导向装置 压板
Standard category:National Standard (GB)
state:Abolished
Date of Release1990-07-23
Date of Implementation:1991-05-01
Date of Expiration:2008-10-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Chipless Processing Equipment>>25.120.30 Molding Equipment and Casting Equipment
Standard Classification Number:Machinery>>Process Equipment>>J46 Mold
Publication information
publishing house:China Standards Press
Publication date:1991-05-01
other information
Release date:1981-12-29
Review date:2004-10-14
Drafting unit:Guilin Electrical Appliance Research Institute
Focal point unit:National Technical Committee for Mould Standardization
Publishing department:National Standardization Administration
competent authority:National Standardization Administration
Introduction to standards:
GB/T 2861.16-1990 Die guide plate GB/T2861.16-1990 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of ChinaWww.bzxZ.net
Guide unit for press tools
Clampr
Subject content and scope of application
GB/T 2861.16-90
Replaces GB2861.16-81
This standard specifies the materials, heat treatment, technical conditions, structural types and specifications of clamps for press guide units. This standard applies to clamps for press guide units GB/T2861.8, GB/T2861.12, GB/T2861.13 and GB/T2861.14.
Reference standards
GB/T12446 Technical conditions for die frame parts GB699 Technical conditions for high-quality carbon structural steel
Material, heat treatment, technical conditions, structural type and specifications of pressure plate 3
3.1 Material: 45 steel GB699.
3.2 Heat treatment: Quenching and tempering HRC28~32.
3.3 Technical conditions are in accordance with the provisions of GB/T12446. 3.4 Structural type and specifications are shown in the figure and table.
Approved by the State Administration of Technical Supervision on July 23, 1990, and implemented on May 1, 1991
3.5 Marking example:
GB/T 2861.16—90
Pressing plate with length L=16mm,
width B=20mm:
16×20GB/T2861.16
Screw diameter
Additional instructions:
This standard was proposed by the Ministry of Machinery and Electronics Industry of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Mold Standardization. 11.5
This standard was drafted by the Mold Branch of the Zhulin Electric Science Research Institute of the Ministry of Machinery and Electronics Industry. The main drafters of this standard are Wang Huachang and Qin Guangwei. This standard is entrusted to the Mold Branch of the Zhulin Electric Science Research Institute of the Ministry of Machinery and Electronics Industry for interpretation. 130
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.