This standard specifies the basic parameters, structural dimensions, requirements, test methods, inspection rules and markings, packaging, transportation and storage of copper pipe equal diameter tees, copper pipe 45° elbows, copper pipe 90° elbows, copper pipe reducers, copper pipe sleeve joints and copper pipe caps for construction. This standard is applicable to piping systems such as cold water, hot water, refrigeration, heating (≤135℃ high temperature water), gas, and medical gas, and can also be used as a reference for other pipelines. CJ/T 117-2000 Copper pipe fittings for construction (socket and spigot type) CJ/T117-2000 CJ/T117-2000 Standard download decompression password: www.bzxz.net

C3/1 117—2000, Standard of Urban Construction Industry of the People's Republic of China
Copper tube fittings for construction (spigot and socket joint)
2000-12-13 Issued
The Ministry of Construction of the People's Republic of China Issued
2001-05-01 Implementation
CJ/T117—2000
Application Standard
Product Type
Test Method
Inspection Rules.
Marking, Packaging, Transportation and Storage...
Design and Use of Copper Non-Silver, Low-Silver Materials and Processing Technology Appendix A (Suggested Appendix)
B (Suggested Appendix)
Stress Calculation and Installation Requirements for Selecting Metal Corrugated Expansion Pipes 12
C I/T117--2000
Since the Ministry of Construction first issued the standard for old building pipe fittings in March 1SS6, relevant departments have continuously put forward "right benefits" for the use period of pipe fittings, and this kind of strong technical force has quickly expanded the content of the standard. The production standard JG/T8031.1~3031.81904 construction open pipe fittings 3 standard repair and joint pieces will be revised this time, and the distance between the pipe and the character type is not equal to the effect of the large 1 industry standard H340199 copper and side alloy joints 3 socket door length non-voucher effect uses the national standard 150016 door 1 steel pipe capillary welding seal according to the head assembly size and test method reading large Lithuania standard AS1, water supply and copper alloy compression fittings, accessories and terminal number required. The outer diameter of the flat port is allowed to deviate from the standard, the nominal diameter is 0V~32mm and (/T180%%-2000 sewn water and copper gas pipes are consistent with the dimensions specified in Table 4 of the high-level response: the nominal diameter is N40~200mm and GB/T168661997* for general purposes and the copper alloy non-chain graphic pipe shape size and allowance in Table 5 (grade). The outside of the pipe is to be cut into a round shape with two pins according to the international standard (274:19754) [G/[33, ~3331.8, and the outside of the pipe is added with an example of W 108 blood this specification. In order to make it not allowed to use copper pipes in traditional Chinese medicine and safety, the standard of B-ultrasound demonstration was added, replacing 3031.1~3031.8-1556. Appendix A and Appendix B of this standard are reminders: the standard quota research and supplement plan of the Ministry of Standardization of Water Supply and Drainage Products was proposed. This standard was drafted by the Ministry of Water Supply and Drainage Products Standardization Committee. The International Automobile Industry Association participated in the test. In the main section of the standard, the Institute continued to form, and Liu planned to be next to Sun Jing and Zheng! . People's Republic of China Urban Construction Industry Standard Copper Pipe Fittings for Construction [Socket Type] || TT || Copaer lube fittings for construction (spigot and socket joint) 1 Scope
CJ/T 117--2030
This standard specifies the general parameters, specifications, test methods, inspection rules, color installation, etc. of the copper pipe full diameter two-way joints, copper pipe 90 mm including joints, copper palm-radius joints, copper sleeve joints, pipe fittings (hereinafter referred to as pipe fittings) for construction.
This standard is applicable to piping systems for cold water, heat, refrigeration, medicine (grade 35 high temperature water), gas, medical gas, etc., and its rotten pipe fittings can also be used:
2 Referenced standards
The texts contained in the above standards shall be used in this standard and shall become the system texts of this standard: The versions shown at the time of this standard revision are valid. All standard instruments are designed with images and marked with 4. The following confirmation documents should be used when possible: 9]—1 Packaging, storage and transportation pictorial symbols
GB/P152?
G3T 154-1S52
GB/T 2(4(
GR/T 706S-'9A9
GBEEEE
Copper and copper-containing parts:
General tolerance metric
Full sales tape
There are also packaging, special symbols, and transportation procedures for processed productsGR:T 1e866-—:A97
GB/T 1?2.9 1908
G0/T :8633-2099
3 Product classification
3.1 Types and codes
A volume of processing copper and feather alloys without doubt round material size no detailed deviation life discussion month core water supply and distribution equipment and defense production financial science soft safety evaluation standard creation energy system pipe and gas pipeWww.bzxZ.net
Pipe and other properties of some types of code quality table 1,
Yun E academic reputation of the type and code
Two-way fire
The Ministry of Construction of the People's Republic of China 20DD-12-13 approved A state
2001-05-01 implementation
Hua diameter joint
To open the joint
A type joint both ends are selected:
3.2 The basic integers of the pipe 4 are shown in Table 2.
CI/T 117—2000
“Table (end)
Table 2 Basic parameters of copper pipes
TrS).T(RA4SE.B45E.AOnK.H9nE.K.Sc
3.3. Basic dimensions of copper pipes and fittings 3.3.1 The dimensions of the pipes and fittings are obtained from Table 1 and Table 3. Basic dimensions of the sockets and fittings
Normal diameter V
Normal diameter
Normal outer diameter of standard fittings
8± 2. 2:
Nominal pressure F
\N1. F MP..
Normal diameter
86= 0. 23
1n5±c15
: 59 - 3. 60
219±3.76
The bracketed numbers are small in size,
2.—The maximum outer diameter of the salary mouth is allowed to be adjusted.
? The average internal production deviation of the previous year
CJ/117—2000
Table 3 (complete)
3SHE:2
3.3.2 The standard configuration type and basic six inches of copper kidney equal diameter three-certificate joints are shown in Figure 2 Table 42
Business 2 pipes and other through-approval heads
Public through-control
CI/T 117-20CC
Table 4 Dimensions of copper common three-way joints
Introduction to the dimensions
In: E
3.3. 3 Pin-tube reducer structure, see 3 and Table 5..
#3 Pin-tube guide diameter flow head
body, ks
P15 MPa
Public barrier
I3u/ru
125/N5
1E0 ur
1F0/::5
Replacement outer diameter
-14:28
-05:55
-05275
.5378.1
133/105
la/lus
1832133
CJ/T 117—2000
Basic dimensions of the reducing tee joint of the pipe
Even
Weight.kg
Public diameter
236/123
2bu/15u
Period pipe
21/10s
CI/T117—2000
Mai 5 (finished)
Give size
The structural type of the copper pipe 45 elbow is called the basic size first Figure 4 and Table 6.L
Nanju pipe 45\broken head
s copper 45 Basic size of elbow
Public diameter
Outer diameter of copper pipe
The size with brackets 5 in the table is not selected
The structure type and basic size of copper pipe elbow can be seen in 5 and table? ..
Mass, kg
FN1.6 MP:
Mass, kg
Public diameter
Outer diameter
Net: Size quantity is not selected
CJ/T117—2000
Figure Copper 9 elbow
? Basic length of pipe head
3.36 Cutting pipe common diameter head basic size of the joint type can be seen in 36 Li Ai 3.15
Measurement, bz
PNI.S ME:
Public connector
Outer diameter of the connector
: 6/12
CJ/T 117—2000
Figure 6: Size of the reducer
Structural size and
Flow rate, kR
PN:CMIPn
N1. FMIP:
Gongdong blanket
1co/5c
100/55
100/SG
125/30
125/ton
150/120
2X/100||tt ||2x/121:
ins/55
1n5/7n
106/65
135/65|| tt||133/105
155/105
135/133
21S/135
CJ/T 117 .-2000
Table 3 (finished)
Hook size
Station configuration of pipe casing waist head and base size ten see figure Liyou! . 84
Figure? Potassium and other joints
Table 9 Copper pipe in the pipe change head of the evil wood ruler card
Gongwu diameter
Wei disk-kg
PN1.f MPz
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.