title>GB/T 3764-1983 Card sleeve - GB/T 3764-1983 - Chinese standardNet - bzxz.net
Home > GB > GB/T 3764-1983 Card sleeve
GB/T 3764-1983 Card sleeve

Basic Information

Standard ID: GB/T 3764-1983

Standard Name: Card sleeve

Chinese Name: 卡套

Standard category:National Standard (GB)

state:Abolished

Date of Release1983-06-17

Date of Implementation:1984-04-01

Date of Expiration:2008-11-01

standard classification number

Standard ICS number:21.060.60;

Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories

associated standards

alternative situation:Replaced JB 1987-1977; replaced by GB/T 3764-2008

Publication information

publishing house:China Standards Press

Publication date:1984-04-01

other information

Release date:1983-06-17

Review date:2004-10-14

Drafting unit:Standardization Institute of the Ministry of Machinery Industry

Focal point unit:National Technical Committee for Standardization of Pipe Accessories

Publishing department:China Machinery Industry Federation

competent authority:China Machinery Industry Federation

Introduction to standards:

This standard is only applicable to ferrule type pipe fittings. GB/T 3764-1983 Ferrule GB/T3764-1983 Standard download decompression password: www.bzxz.net

Some standard content:

National Standard of the People's Republic of China
Ferrule
This standard is only applicable to ferrule type pipe fittings. Marking example:
Tube - Ferrule with outer diameter D of 14mm
Ferrule 14GB3764—83
National Bureau of Standards 1983-06-17 IssuedbzxZ.net
UDC 621.643.4
GB3764—83
Others subject to
Dust sharp angle
1984-04-01 Implementation
GB 3764—88
- 0,10
Note, the weight is the value of the spring, and the specific gravity is 7.85kg/dm°. The technical conditions shall be in accordance with the provisions of GB3765—83. + 0.20
Additional Notes:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. mm
(kg/100 pieces
This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the 708th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin. From the date of implementation of this standard, the original departmental standard IB1987-77 "Cut Ring" will be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.