JB/T 2936.2-1999 Technical requirements for closed cold extrusion presses
Basic Information
Standard ID:
JB/T 2936.2-1999
Standard Name: Technical requirements for closed cold extrusion presses
Chinese Name:
闭式冷挤压压力机 技术条件
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-14
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Chipless Processing Equipment>>25.120.10 Forging Equipment, Punching Machines, Shearing Machines
Standard Classification Number:Machinery>>General Processing Machinery and Equipment>>J62 Forging Machinery
associated standards
alternative situation:JB 2936-1981
Procurement status:JIS B6402-1977 NEQ
Publication information
other information
Focal point unit:National Forging Machinery Standardization Technical Committee
Publishing department:National Forging Machinery Standardization Technical Committee
Introduction to standards:
JB/T 2936.2-1999 This standard is a revision of JB 2936-81 "Technical conditions for closed cold extrusion presses". During the revision, the requirements for important fixed contact surfaces, gear axial misalignment, accuracy inspection methods, and maximum temperature of rolling bearings were modified. This standard is part of the JB/T 2936 "Closed cold extrusion press" series of standards. This series of standards includes the following two parts: JB/T 2936.1-1999 Types and basic parameters of closed cold extrusion presses JB/T 2936.2-1999 Technical conditions for closed cold extrusion presses This standard specifies the technical requirements, test methods and inspection rules for closed cold extrusion presses. This standard is applicable to crank and elbow type cold extrusion presses. This standard was first issued in January 1982. JB/T 2936.2-1999 Technical conditions for closed cold extrusion presses JB/T2936.2-1999 Standard download decompression password: www.bzxz.net