Some standard content:
ICS: 59. 083. 30
Textile Industry Standard of the People's Republic of China
FZ/T73020-2004
Knitted casual wear
Knitted sportswear
Published on July 3, 2004
National Development and Reform Commission of the People's Republic of China Implemented on November 1, 2004
FL/73020—2004
Standard is based on the American Test Material Cooperative Standard ASTMD156201 for women, adults and knitted sportswear. The standard performance of the fabric is divided into multiple categories, and the 4 standards are not the same as ASTM1)115620C1-sensitivity The standard is issued by China Textile Industry Association
, the National Textile Standardization Technical Committee is the main body of the standard, the main units are: National Product Quality Supervision and Inspection Center, Shanghai, Beijing Zhongning Textile Co., Ltd., Guangdong Qianda Textile Products Co., Ltd., Jiangsu A Group Co., Ltd.
, the main people are: Zhao Zhen, Sa Jifeng, Bao Jieyi, Ji Bojie, Hou Zhigang, and others. This standard is issued for the first time.
Scope
Knitted casual wear
Fz/T7302G—2004
This standard specifies the steps, changes, testing methods, standard current rules, marking, transportation and storage of knitted casual clothing products. This standard is applicable to the identification of products made of knitted fabrics as the main material. 2 Normative references
The clauses in the following documents become the clauses of this standard through the certification of this standard. For all referenced documents with a date, all subsequent validity documents (excluding the internal specifications or revised versions) shall be subject to the latest version of this standard. For all referenced documents without a date, the latest version shall apply to the health standard G25 Evaluation of other colors F (G255tS0-AC23
GH/221) Standard for quantitative chemical analysis of two-component fiber products G13/101SS7.cqV1S0183319773
CB/1 Identification of products-Quantitative chemical analysis of components and other textile products 241-1SS79S55:1 971
2. Determination of the strength of textile products: the method of water removal by hydrolysis" G3 Color fastness 920110105X: 193
G21. Test of color fastness of textile products: test 1 [GB/392.19971$013Co1: 1980)
GB/T3922 Textiles pre-flow color change test method (GH/1822-1W5, egJS105E04, 194) GB/TSU.1 Textile fabric pilling test surface track reverse method GBT
Design environment textile packaging
Consumer product use H said period number of products and clothing instructions GE 5256. 41
13/1 413
GB/T 7573
CB/T $427
Knitted fabrics-Specifications and dimensions for underwear
Determination of water-resistance of textile products: 3:3—2002.I50711980.M) Half-degree test for artificial light color: Frequency C/127—:998.egV1S0)105-132: Textiles
Correction of household washing dry coal: B862021806530:32HTR7
Knitted fabrics-Weft materials and test methods F201053 Textile fiber content and standard training! Www.bzxZ.net
F7/T3:057.1~01057..About woven fiber sieve test method [2.0 fabric atmosphere to produce and maintain the test method ST,-513-200% needle paper fuzz pilling
3 product number
knitted casual clothing type according to (/T-33.1--155.3 or GH/1E41. stipulated implementation, requirements
actual requirements are divided into two aspects: internal quality and external quality: internal quality should be swept ball top bursting strength, this size change secret, water washing user note 1
FZ/T 7302C2034
curvature, natural color, color resistance, single color, half plate, flower color, printing color, light color, pilling, formaldehyde, sweat and fiber, external quality, external quality, uniform size, size difference, etc.
4.1 Grading regulations
4.1 The quality of the garment is the same as the public price, and the quality of the product is the same. 4.1.2 The quality of the garment is determined by the quality of the enterprise according to the "safety evaluation season", the appearance quality of the product is evaluated, and the combination of the two is used to determine the long and low grades.
4.2 In the quality requirements
4.2. 1 The internal quality conditions are shown in the table.
4.2.2 The internal quality indicators of the vehicle are based on the inspection station. 1.2.3 When the actual content of the product is less than 3 or less than the marked content, the product will not be evaluated for pilling, etc. 4.2.4 The product will not be evaluated for pilling, etc. 4.2.5
The product will not be evaluated for pilling, etc. Intrinsic quality requirements
Dingxi effect strong N
Benzhi ruler room chemical enjoy 5
Water field after the simulated curve flat style:
Faji blood empty
sweat color 1 double · Jing
Five Li color small grinding/
color resistance
over-quality grade
Shangdai·destruction
A match mghg
Including net money:
4....--.3
4 (deep piece 3)
: Don't be distracted, 1..2 open loss width is dark color. 31/12 standard seat is legal color 2
-5. 3~. +2 n
5. 5~.+x, h
31 secondary color 2%
1. c--7.5
Anti-FZ/Ting CIC33 visual quality
Quality product
. 1~ -3. :)
—3 digits
4.3 Appearance quality requirements
FX/T73020—2004
4.3.1 Appearance quality rating shall be based on surface quality rating. The specification size is small and the difference itself is only the difference, the chain system stipulates the reverse quality rating, and the product is found to be different from the external batch extension point to be evaluated according to the low quality pipe change rating, 4.3.2 Surface evaluation requirements
4.3.2.1 Surface quality rating 2.
Table 2 Surface performance evaluation rating regulations
Name*
Effective road positive and oblique system products:
Chuangqu Yigao
Oil evaluation
Not more than
Not more than
Time change, color change, slight change of light, deterioration of acid point
No grade
First grade
10 villages between 1 level, main brush material between 3-level. n
Blue plate can contain other parts
money continued or 2
·place, calibration
Shao Xiaoyuan Xu
This is the energy point in the table (the surface energy point depth in the standard is determined in the year, and the design is: the surface oil point is more than the Thai alliance's clothing surface batch point color sample according to the Taiwan pharmaceutical
material particle size can be graded
fan this. Deep
: the front two pounds of blood are required under the industry situation) The beauty has no important parts, 4.3.2.2 The company's products are only allowed to have two high-grade limit points in the table, and those who exceed one level number 4.3.3 Specification size coupon table 5
Table 3 Specification size deviation: rm. or less: market master: width, night research: tt. or other products: tt. or other products. 4.3.4 The hand measurement difference is 1.5m for superior products, 1.0m for first-class products, 1.cm for standard products, 4.3.5 The collar of the finished garment shall be inspected and measured (up to 0.1cm) 4.3.5.7 The length measurement shall not be based on standard 1. In the light of length:
,
Figure 1 Example of measurement parts of the top
Total position is the reason for
Combined product
F7./T73020-2004
4.3.5.2 Nuclear disk position is shown to:
---group [.
2--sugar research,
4.3.5.3 Follow the visual measurement part to show the moment see Figure 3, people:
Oil length:
4. 3. 5.4
Night product list:
Example of measurement position
Figure 3 Research and development of the honor department
Clothing measurement position regulations
One and the tour and the high place straight guard reach
2.3.6 system regulations
After and, the interval quantity
only allows the decline, the continuous installation point interval: m state camp section detailed dano
To the edge of the rule
Out of the internal situation from the middle of the rule to
In addition to the tour and the change point of the store. In
: Note the detailed loss of the mountain dynamic nuclear quantity
4,3.6.1 Wei system The quality should be firm, the line should be flat, and it should be suitable for fast tightening. Four or more lines should be used to form a chain. 4.3.E.2
4.3..3 The edge of the half-strength flat mark should be hit by the world's added company: 4.3.6.4 The product should be made on the blood strength sales rate, and the color sweat evaluation should be scientifically promoted to prove the government's overall line. The decorative shallow European 2FZ/T73C20--2004
4.3.6.5 The product frequency type is correct, the door end flat point zipper is pasted smoothly and lacks half of the sex. Head repair and elimination. Light requirements. Included product requirements for the selection of the right car, 4.3.6.6
The stitch pattern regulations are shown in the table,
Table 5 The stitch density is currently determined
The flat road t
Needle design is not guaranteed.
Two: the nature of the war sleep this call
the measurement of the trace must not be done through the creation of measurement,
flat European needle machine
pressed system machine
year letter for the needle let the effect 2
wide band machine
4.3.6.8 lock service machine speed out connection angle out, net length and width of 3 needles -> needle cm, purchase fee range of each station 3 needles ~ 3 needles 4.3.E.9 added trace length, book a buttonhole injury, 5 needles. 4.3.6.10 The width of the chain machine edge avoidance shall not be greater than 0.3cm, and the warp
4.3.6.11 The stitch edge rate of the stitching needle is lower than the standard. The double-needle machine shall be modified to have one needle guide, and the flat braid machine shall also have two jump holes. The two machines shall have one jump hole. - Manual: 5 pieces of inspection calculation, 5 test methods
Sampling quantity, appearance quality test conditions, sample preparation and test conditions 5.1
According to (depending on the implementation,
5.2 Test items
5.2.1 The basic force test connection GDT 3378 to 5.2.2 Washing scale change
5.2.2.1 The scale change rate is reported as 1378 times, indicating the standard! Washing \ products according to the B863 price at the end" strong hall to implement the trial monitoring number of 3 pieces
5. 2. 2. 2 The measurement position of the water yard size change rate is shown in Table 5, Table E The measurement position of the water washing size change rate is
East Long Minshan Building Quantity
: Please correct 5 ten immortal meals, the whole intersection: below, the place of the city, the edge
Xu read together, out to Xu's general social situation. Mom by the "good points according to the paragraph
5.2.2.3 Water standard small change rate north side space department letter said must: ten clothes wind standard agricultural station collection clothes length into a staggered length waist system as the self-direction and reversing measurement industry, the collection length or fixed length before the average value of some as the bucket calculation. The clock ten European front and the middle leg as the point or the description of the balance year position, the details of the left side of the half mean of the age as the calculation ban, the yellow side with the car, the width limit and the interval as the calculation party according to the average. Short ancestor take the length For the measurement parts of the model, the average length of the side cut is used as the calculation basis, and the measurement is made after washing.
FZ/T73020--2004
5.2.2.4 For the measurement parts of the top before and after washing, see Figure 1. 5.2.2.5 For the measurement parts of the top before and after washing, see Figure 1. 5.2.2.6 For the measurement parts of the dress before and after washing, see Figure 0. 6 For the measurement parts of the dress before and after washing, see Figure 0. 5.2.2.7 For the measurement parts of the shorts before and after washing, see Figure 0. Examples of measurement locations before and after short-cycle washing
5.2.3 Washing color half degree. Printing color change resistance test (/18u31.1 implementation, 5.2.4 Order collapse car sincere test connection (3.T22 hot line 5.2.5 Cold connection color cattle degree, printing color detection method test amine GB\39 implementation, only vertical direction. 5.2.6 Light resistance color test according to (is/T842? Square loss 3 implementation. 52.7 Pilling dynamic whole move GB22. Hot line. The point force is 72N. Pilling release number of times, pilling number 0 times, rating connection 6
G5B16·1523200 cases
5.2.8 Monthly or test number GH/2.9121 implementation 5.2.9T value test safety 3/ 7573 implementation
F2/T73020—2004
5.2.10 Test method GB/T2910.(!5/T511.FZ/T61U57.101n57.11.F7/T0109 implementation: 5.2.11 Color difference evaluation according to GB/T250.(!5/T511.FZ/T61U57.101n57.11.F7/T0109 implementation: 5.2.12 Color difference evaluation according to GB250.
6 Judgment rules
6.1 Appearance quality
6.1.1 Appearance quality is classified according to variety, color, format and size. If the non-conforming rate is 5.0% or less, the batch of products will be classified as unqualified. If the non-conforming rate is above 5.05, the batch of products will be judged as unqualified. E.1.2 The difference in inner packaging marks is calculated by piece, and no outer packaging errors are allowed. 6.2 Inner quality
6, 2.1 The strength, pilling, PH value, fiber content, and cold test results of the batch of products are qualified, and those that are unqualified are considered qualified.
6.2.2 The dimensional change of the water method is usually determined by the arithmetic average of all samples as the step control test result, including the provincial standard to determine the batch of products. The qualified ones are considered qualified. If the product is qualified, the average value of the shrinkage (or swelling) test results will be used as the test result. If the product is qualified, the batch of products will be judged as qualified or unqualified. 6.2.3 The color fastness, color fastness, and light resistance test results will be used as the test result. If the product is qualified, the batch of products will be judged as qualified or unqualified. If the product is unqualified, the product will be judged as unqualified. 6.3 Test
6.3.1 If any party has objections to the test results, they can request a re-test within the specified time limit for all the objection items. 6.3.2 When requesting a re-test, all the requested test data must be verified. 6.3.3 The quantity tested during the inspection is the quantity at the beginning of the inspection. The determination of the re-inspection shall be carried out according to the provisions of 6.1 and 6.2. The determination shall be based on the re-inspection results. 7.1 Product marking, packaging, transportation and storage shall be carried out according to G3 5295. 7.2 Product packaging shall be carried out according to G5.T4856 or the agreement. 7.3 Products shall also be placed in a dark, ventilated, deep, disinfected storage room to prevent leakage and pollution. 7.4 Products shall be placed in a dark, ventilated, deep, disinfected storage room to prevent leakage and pollution.1
According to the implementation of the standard,
5.2 Test items
5.2.1 The test results are as follows: GDT 3378. 5.2.2 Washing scale change
5.2.2.1 The scale change rate is reported as 1378 times, indicating the standard! Washing products are based on the B863 price at the end of the "Strong Hall" implementation test monitoring number of 3 pieces
5. 2. 2. 2 The measurement position of the water yard size change rate is shown in Table 5, Table E The measurement position of the water washing size change rate is
East Long Minshan Building Quantity
: Please correct 5 ten immortal meals, the whole intersection: below, the place of the city, the edge
Xu read together, out to Xu's general social situation. Mom by the "good points according to the paragraph
5.2.2.3 Water standard small change rate north side space department letter said must: ten clothes wind standard agricultural station collection clothes length into a staggered length waist system as the self-direction and reversing measurement industry, the collection length or fixed length before the average value of some as the bucket calculation. The clock ten European front and the middle leg as the point or the description of the balance year position, the details of the left side of the half mean of the age as the calculation ban, the yellow side with the car, the width limit and the interval as the calculation party according to the average. Short ancestor take the length For the measurement parts of the model, the average length of the side cut is used as the calculation basis, and the measurement is made after washing.
FZ/T73020--2004
5.2.2.4 For the measurement parts of the top before and after washing, see Figure 1. 5.2.2.5 For the measurement parts of the top before and after washing, see Figure 1. 5.2.2.6 For the measurement parts of the dress before and after washing, see Figure 0. 6 For the measurement parts of the dress before and after washing, see Figure 0. 5.2.2.7 For the measurement parts of the shorts before and after washing, see Figure 0. Examples of measurement locations before and after short-cycle washing
5.2.3 Washing color half degree. Printing color change resistance test (/18u31.1 implementation, 5.2.4 Order collapse car sincere test connection (3.T22 hot line 5.2.5 Cold connection color cattle degree, printing color detection method test amine GB\39 implementation, only vertical direction. 5.2.6 Light resistance color test according to (is/T842? Square loss 3 implementation. 52.7 Pilling dynamic whole move GB22. Hot line. The point force is 72N. Pilling release number of times, pilling number 0 times, rating connection 6
G5B16·1523200 cases
5.2.8 Monthly or test number GH/2.9121 implementation 5.2.9T value test safety 3/ 7573 implementation
F2/T73020—2004
5.2.10 Test method GB/T2910.(!5/T511.FZ/T61U57.101n57.11.F7/T0109 implementation: 5.2.11 Color difference evaluation according to GB/T250.(!5/T511.FZ/T61U57.101n57.11.F7/T0109 implementation: 5.2.12 Color difference evaluation according to GB250.
6 Judgment rules
6.1 Appearance quality
6.1.1 Appearance quality is classified according to variety, color, format and size. If the non-conforming product rate is within 5.0%, the batch of products will be classified as unqualified. If the non-conforming product rate is above 5.05, the batch of products will be judged as unqualified. E.1.2 The difference in inner packaging marks is calculated by piece, and no outer packaging errors are allowed. 6.2 Inner quality
6, 2.1 The strength, pilling, pH value, fiber content, and cold test results of the batch of products are qualified, and those that are unqualified are considered qualified.
6.2.2 The dimensional change of the water method is usually measured by the arithmetic average of all samples as the step control test result, including the provincial standard to determine the batch of products. The qualified ones are considered qualified. If the product is qualified, the average value of the shrinkage (or swelling) test results will be used as the test result. If the product is qualified, the batch of products will be judged as qualified or unqualified. 6.2.3 The color fastness, color fastness, and light resistance test results will be used as the test result. If the product is qualified, the batch of products will be judged as qualified or unqualified. If the product is unqualified, the product will be judged as unqualified. 6.3 Test
6.3.1 If any party has objections to the test results, they can request a re-test within the specified time limit for all the objection items. 6.3.2 When requesting a re-test, all the requested test data must be verified. 6.3.3 The quantity tested during the inspection is the quantity at the beginning of the inspection. The determination of the re-inspection shall be carried out according to the provisions of 6.1 and 6.2. The determination shall be based on the re-inspection results. 7.1 Product marking, packaging, transportation and storage shall be carried out according to G3 5295. 7.2 Product packaging shall be carried out according to G5.T4856 or the agreement. 7.3 Products shall also be placed in a dark, ventilated, deep, disinfected storage room to prevent leakage and pollution. 7.4 Products shall be placed in a dark, ventilated, deep, disinfected storage room to prevent leakage and pollution.1
According to the implementation of the standard,
5.2 Test items
5.2.1 The test results are as follows: GDT 3378. 5.2.2 Washing scale change
5.2.2.1 The scale change rate is reported as 1378 times, indicating the standard! Washing products are based on the B863 price at the end of the "Strong Hall" test monitoring number of 3 pieces
5. 2. 2. 2 The measurement position of the water yard size change rate is shown in Table 5, Table E The measurement position of the water washing size change rate is
East Long Minshan Building Quantity
: Please correct 5 ten immortal meals, the whole intersection: below, the place of the city, the edge
Xu read together, out to Xu's general social situation. Mom by the "good points according to the paragraph
5.2.2.3 Water standard small change rate north side space department letter said must: ten clothes wind standard agricultural station collection clothes length into a staggered length waist system as the self-direction and reversing measurement industry, the collection length or fixed length before the average value of some as the bucket calculation. The clock ten European front and the middle leg as the point or the description of the balance year position, the details of the left side of the half mean of the age as the calculation ban, the yellow side with the car, the width limit and the interval as the calculation party according to the average. Short ancestor take the length For the measurement parts of the model, the average length of the side cut is used as the calculation basis, and the measurement is made after washing.
FZ/T73020--2004
5.2.2.4 For the measurement parts of the top before and after washing, see Figure 1. 5.2.2.5 For the measurement parts of the top before and after washing, see Figure 1. 5.2.2.6 For the measurement parts of the dress before and after washing, see Figure 0. 6 For the measurement parts of the dress before and after washing, see Figure 0. 5.2.2.7 For the measurement parts of the shorts before and after washing, see Figure 0. Examples of measurement locations before and after short-cycle washing
5.2.3 Washing color half degree. Printing color change resistance test (/18u31.1 implementation, 5.2.4 Order collapse car sincere test connection (3.T22 hot line 5.2.5 Cold connection color cattle degree, printing color detection method test amine GB\39 implementation, only vertical direction. 5.2.6 Light resistance color test according to (is/T842? Square loss 3 implementation. 52.7 Pilling dynamic whole move GB22. Hot line. The point force is 72N. Pilling release number of times, pilling number 0 times, rating connection 6
G5B16·1523200 cases
5.2.8 Monthly or test number GH/2.9121 implementation 5.2.9T value test safety 3/ 7573 implementation
F2/T73020—2004
5.2.10 Test method GB/T2910.(!5/T511.FZ/T61U57.101n57.11.F7/T0109 implementation: 5.2.11 Color difference evaluation according to GB/T250.(!5/T511.FZ/T61U57.101n57.11.F7/T0109 implementation: 5.2.12 Color difference evaluation according to GB250.
6 Judgment rules
6.1 Appearance quality
6.1.1 Appearance quality is classified according to variety, color, format and size. If the non-conforming product rate is within 5.0%, the batch of products will be classified as unqualified. If the non-conforming product rate is above 5.05, the batch of products will be judged as unqualified. E.1.2 The difference in inner packaging marks is calculated by piece, and no outer packaging errors are allowed. 6.2 Inner quality
6, 2.1 The strength, pilling, pH value, fiber content, and cold test results of the batch of products are qualified, and those that are unqualified are considered qualified.
6.2.2 The dimensional change of the water method is usually measured by the arithmetic average of all samples as the step control test result, including the provincial standard to determine the batch of products. The qualified ones are considered qualified. If the product is qualified, the average value of the shrinkage (or swelling) test results will be used as the test result. If the product is qualified, the batch of products will be judged as qualified or unqualified. 6.2.3 The color fastness, color fastness, and light resistance test results will be used as the test result. If the product is qualified, the batch of products will be judged as qualified or unqualified. If the product is unqualified, the product will be judged as unqualified. 6.3 Test
6.3.1 If any party has objections to the test results, they can request a re-test within the specified time limit for all the objection items. 6.3.2 When requesting a re-test, all the requested test data must be verified. 6.3.3 The quantity tested during the inspection is the quantity at the beginning of the inspection. The determination of the re-inspection shall be carried out according to the provisions of 6.1 and 6.2. The determination shall be based on the re-inspection results. 7.1 Product marking, packaging, transportation and storage shall be carried out according to G3 5295. 7.2 Product packaging shall be carried out according to G5.T4856 or the agreement. 7.3 Products shall also be placed in a dark, ventilated, deep, disinfected storage room to prevent leakage and contamination. 7.4 Products shall be placed in a dark, ventilated, deep, disinfected storage room to prevent leakage and contamination.3. The color fastness, ... 7.2 The product package should be in accordance with G5.T4856 or the agreement. 7.3 The product should also be placed in a dark, well-ventilated, deep, disinfectant pool to prevent contamination. 7.4 The product should be placed in a dark, well-ventilated, deep, disinfectant pool to prevent leakage and pollution:3. The color fastness, ... 7.2 The product package should be in accordance with G5.T4856 or the agreement. 7.3 The product should also be placed in a dark, well-ventilated, deep, disinfectant pool to prevent contamination. 7.4 The product should be placed in a dark, well-ventilated, deep, disinfectant pool to prevent leakage and pollution:
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.