This standard specifies the technical requirements for wire and cable stranding equipment. JB/T 5818.4-1991 Technical requirements for wire and cable stranding equipment JB/T5818.4-1991 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
Technical requirements for wire and cable stranding equipment
Part 4
Cage stranding equipment
Subject content and scope of application
This standard specifies the technical requirements for wire and cable cage stranding equipment. JB/T5818.4-91
This standard applies to the JL series cage stranding machines for stranding wire and cable conductors and the CL series cage stranding machines for stranding wire and cable cores. This standard should be used together with JB/T5818.1 Technical requirements for wire and cable stranding equipment Part 1 General provisions. 2 Usage characteristics
2.1 It can regularly strand conductors (JL series) or cable cores (CL series). The stranded conductors or cable cores have good structural stability and mechanical back-twist.
2.2 The JL series can achieve single-layer stranding. 2.3 The strands used in the JL series are all solid core conductors, but the Y type can also use stranded conductors. 3 Model
Product model as specified in Table 1.
4 Specification
Cage stranding machine, Y type
Cage stranding machine, P type
Cage stranding machine, C type
Cage stranding machine, K type
Cage stranding machine, T type
Cage cabling machine, Y type
4.1 Specifications of JL series products shall comply with the provisions of Table 4 of JB/T5814.3 "Basic parameters of special equipment for wires and cables Part 3
Wire stranding equipment".
4.2 Specifications of CL series products shall comply with the provisions of Table 2 of JB/T5814.4. 5 Technical requirements
Cage rotator
Processing accuracy
The accuracy of the capstan shall comply with the provisions of Table 2.
Approved by the Ministry of Machinery and Electronics Industry on October 17, 1991, and implemented on October 1, 1992
Capstan circular runout
Energy items
JB/T5818.4-91
Diameter D≤1650
Diameter D>1650
Parallelism of the axis of the reel frame on the capstan to the axis of the capstan supportThe coaxiality of the two supporting axes of any reel frame on two adjacent capstansThe accuracy of the supporting wheel shall comply with the provisions of Table 3.
Performance items
Circular runout of the supporting wheel
The accuracy of the reel frame shall comply with the provisions of Table 4.
400, 500, 630
1000, 1600, 2000
Balance requirements
The balance accuracy of the capstan shall comply with the provisions of Table 5.
300~100
The balance accuracy of the reel rack shall comply with the provisions of Table 6. Specification
400，500
630，1000，1600，2000
5.1.3 Assembly accuracy
a. The assembly accuracy of the stranding cage shall comply with the provisions of Table 7, Figure 1. 84
Tolerance value
Tolerance value
Tolerance value of the coaxiality of the two supporting shafts
Static balance
Static balance
Static balance
Static balance
|Static balance
Balance requirements
Reel rack
Balance requirements (horizontal direction)
JLY,JLPbZxz.net
All specifications
All specifications
Pay-off reel d,≤1000
Pay-off reel d,>1000
JB/T5818.4-91
Spindle deflection
The assembly accuracy of the reel rack shall comply with the provisions of Table 8, Figure 2. Figure
The contact area between the capstan and the support wheel shall not be less than 80%. 5.2 Braking
5.2.1 The adjustment of the brake belt must be flexible, convenient, safe and reliable. 5.2.2 The contact area between the brake belt and the brake wheel shall not be less than 80%. 5.2.3 The braking time shall comply with the following provisions: Y type
C, K type
No more than 3~7s.
Not more than 6 to 10s.
Tilt angle.
Circular runout tolerance value
5.3 Noise
The noise of the whole machine shall not exceed 85dB (A)
6 Test
The product shall be tested as specified in Table 9.
Project name
Basic technical requirements
General requirements
Processing quality requirements
Assembly requirements
Electrical system
Safety requirements
Auxiliary device requirements
Signages and logos
Packing requirements
Processing accuracy
Reel rack
Assembly accuracy
Reel rack
Contact surface between cage and supporting wheel
Braking device
Balance accuracy
Reel Frame
Running test
Idle operation
Load operation
Additional instructions:
JB/T5818.4-91
Technical requirements
Comply with Article 4 of JB/T5818.1
Comply with Article 5 of JB/T5818.1
Comply with Article 6 of JB/T5818.1
Comply with Article 7 of JB/T5818.1
Comply with Article 8 of JB/T5818.1|| tt||Comply with Article 9 of JB/T5818.1
Comply with Article 10 of JB/T5818.1
Comply with Article 11 of JB/T5818.1
Comply with Article 5.1.1, Item a of this standard
Comply with Article 5.1.1, Item b of this standard
Comply with Article 5.1.1, Item c of this standard
Comply with Article 5.1.3, Item a of this standard
Comply with Article 5.1.3, Item b of this standard
Comply with The provisions of Article 5.1.3, Item c of this standard
Comply with the provisions of Article 5.2 of this standard
Comply with the provisions of Article 5.3 of this standard
Comply with the provisions of Article 5.1.2, Item a of this standard
Comply with the provisions of Article 5.1.2, Item b of this standard
Comply with the provisions of JB/DQ8124.1
Comply with the provisions of JB/DQ8124.1
Comply with the provisions of JB/DQ8124.11
This standard was proposed and managed by the Shanghai Cable Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Shanghai Cable Research Institute and other units. The main drafter of this standard is Wang Shanqing.
Test type
According to JB/DQ8124.10
Test method
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.