Some standard content:
Classification number: X50
Light Industry Standard of the People's Republic of China
QB/T3652-1999
F52B7X50004-1990
1999-04-21 Release
State Bureau of Light Industry
1999-04-21 Implementation
QB, T3652-1999
This standard is originally a professional standard B/TX50004-1901, which was converted into QB/T3652-1999 after being issued by the State Bureau of Light Industry (1999) No. 112, and remains unchanged. This standard was proposed by the Industry Management Department of the State Bureau of Light Industry. This standard was issued by the National Center for Standardization of 3D Products. This standard was developed by Beijing Deguang, Shanghai Lei!, and Shanghai Wenzhidong Research Institute. This standard is mainly implemented from the beginning, and replaces the original light industry professional standard: TX50004-1990.
Light Industry Standard of the People's Republic of China
The main content and scope of application
QB/T3652-1999
Replaces ZR/IX S0KHA-1990
This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard is applicable to painting, calligraphy, rubbing and industrial and artistic works. 2 Reference standards
GB2828 Batch inspection variable counting drag sampling and sampling table B2529 Periodic inspection variable counting sampling procedure and sampling table 3 Product classification
Product specification The quality of the packaged product is divided into 60:100, 253, 50G, 1000g, etc. 4 Technical requirements
4.1 The product quality is divided into commercial grade, intermediate grade and popular grade. 4.2 The physical and chemical performance indexes of the product shall meet the requirements of the table engineering regulations. Table 1
High color parts
Water resistance
Not less than the original color net 9
Original washing care expansion without watermark
Water flooding 24 without running
Not less than the original rolling package year
Original flow without amine watermark
s±i℃
6 female ball eyebrow quality, the physical and chemical properties of the original liquid can still meet the standard indicators of light protection good no odor
National Light Industry Kitchen 1989-04-21 Approved
1999-04-21 Implementation
QB/T 3B52--1989
4.3 The quality of the main packaging of the product shall comply with the requirements of Table 2. Installation
Indicator name
Technical requirements
100%, (100~500, 0±
Single placement does not show
Complete molding, no fast phase of combustion difference, crack
Product rate is complete, pasting is normal
4.4 The product has a warranty period of 1 year under the conditions specified in this standard. 5 Test method
5.1 Color
5.1.1 Take 3 test strips: 120g of 0mm×50mm is vertically placed in a cup containing sample juice, and it is taken for 1m, and dried along the groove of the cup for 1 twist. After it is naturally dried and dried in an oven, it is measured with a counter-meter. Each test strip is measured at the upper, middle and lower points (with the center of the test paper as the midpoint, 1.6m away from the midpoint midline and at one point each), and the test results are taken as the average of the three tests. (Reflection density meter type: CF-4). 5.1,2 Color selection can also be done by using a colorimeter. The data are compared with the reflection density meter data, see Appendix A: Supplementary. 5,2 Color
Take the sample sample and test it again at 2 degrees for 15 minutes. Use high-efficiency strip test and compare the data measured by the instrument with the original data. 5.3 Expansion
Use some absorbent juice to absorb the juice for a few times. Do not drop it on the spot. After natural expansion, check it.
5.4 Water resistance
Place the paper strip that has been tested for emergency decision at the bottom of one-third of the test, put it in a suitable constant humidity box at 2 degrees to dry for 4 hours, then take it out and immerse it in natural water for 24 hours. The test sample should not be required. 5.5. Take the test juice and put it in a 100ml cup for adults, put it in the refrigerator, adjust it to the standard humidity: after 1h, take it out for testing.
b, put the test juice in ice, adjust the ice temperature to 6±1℃, keep it warm for 6b, then suck it out, let it acidify naturally under 25℃, then use it for drinking, let it stand for 1Umin, and do physical and chemical tests. 5.6 Abrasion resistance
Take the test juice in a 501, 90ml culture medium, cover it, put it in a constant temperature and humidity box with a temperature of 4±1: relative humidity of 7075 for 72h, and measure it after 72h. 5.7 Quality 3
Put the bottled juice sample on the ground with a wind speed of 0.01 and weigh it. Calculate the total mass with the following formula: -P, -P,
Formula: P = sample mass. ,
Starter flux, 6,
QB/T36521999
Subtract the total mass of the bottled juice from the total mass of the juice. Invert the bottled juice by 1, then adjust the juice to the desired level and measure the test rate. 5.9 The quality of the juice, trademark and external parts shall be tested daily. 6 Inspection Rules
6.1 Acceptance Inspection
6.1.1 Products must be inspected and qualified by the manufacturer and attached with the product inspection certificate before they can leave the factory. 6.1.2. Acceptance inspection shall be carried out in accordance with GB282. 11. Single sample inspection. B.7.3 The items, sequence and AQ value of the acceptance inspection shall comply with the provisions of Table 3. Table 8
Inspection items and rates of individual products
Original quantity 57
Net total 5.3
Shop 5.9
6.7. Annual inspection: If the inspection fails, the manufacturer shall conduct a separate inspection and the acceptance shall be carried out. The corresponding strict inspection shall be carried out, and the actual control effect and the original requirements of the product shall be attached. If the batch is wrong again, it shall not be submitted for acceptance again.
6.2 Type inspection
The products selected for type inspection shall be selected from the batches that have passed the acceptance inspection. 6.2.1
Type inspection shall be carried out every 5(0kg). Type inspection shall also be carried out when the following conditions occur:
b, change of main raw materials;
, suspension of production for more than half a year and restart of production;
d, national quality inspection organization shall take the requirements for type inspection. 6.2. Plastic inspection shall be carried out according to CB289 material classification 1. One-time sampling inspection 4. Check the grouping and sequence of the items in the type inspection. The ROL of the quality level should meet the requirements of the environment. 6.2.4. Qualified product category. Test items and chapters. Color. 5.1. Color. 5.2. 5.3. Water resistance. 5.4. 5.5. 5. QE/T 3652-1399. 6.2.5. The batches that pass the type inspection can be used as qualified products for delivery. 6.2.6. According to the requirements of the purchaser, the supplier shall provide the type inspection report. 6.3. The sample shall be selected by piece method, and the single sample shall be bottle. 7.1. Packaging, transportation and storage. Marking
Each bottle should be marked with the trade name, brand name, and full name of the manufacturer. The packaging and packaging should be printed with the brand name. The brand name should be printed with a non-fading color on the outer packaging, indicating the product number, product name, specification, quantity, quality, quantity, production plant, warranty date, and the words "Caution, do not invert" and "The best product". 7.2 Packaging
Each bottle should be placed in a small tray printed with the trademark and brand name. According to different product specifications, a certain number of small trays should be placed in a tray. The outer packaging should be solid. bzxZ.net
7.3 Transportation|| tt||When transporting, the product should be lightly packed and lightly made, and the product should be transported in a safe and stable manner. 4. It should not be stored in a pile to prevent the carton from being damaged. The product should be stored in a color storage room with a suitable temperature and air filter. QB,/T3652-1999 Reflection density meter and photoelectric colorimetric number matching table (supplement) 5a1 colorimeter test method is used in this hot sale, and the source and the Shangmeng juice are both available to measure the north and south line
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.