title>GB 9330.2-1988 Plastic insulated control cables PVC insulated and sheathed control cables - GB 9330.2-1988 - Chinese standardNet - bzxz.net
GB 9330.2-1988 Plastic insulated control cables PVC insulated and sheathed control cables
Basic Information
Standard ID:
GB 9330.2-1988
Standard Name: Plastic insulated control cables PVC insulated and sheathed control cables
Chinese Name:
塑料绝缘控制电缆聚氯乙烯绝缘和护套控制电缆
Standard category: National Standard (GB)
state: Abolished
Date of Release 1988-05-23
Date of Implementation: 1989-01-01
Date of Expiration: 2009-04-01
standard classification number
Standard ICS number: Electrical Engineering>>Wires and Cables>>29.060.20 Cables
Standard Classification Number: Electrician>>Electrical Materials and General Parts>>K13 Cable and Accessories
Publication information
publishing house: China Standard Press
Publication date: 1989-01-01
other information
Release date: 1988-06-11
Review date: 2004-10-14
drafter: Wu Zengquan, Yu Meihua
Drafting unit: 上海电缆研究所、上海电缆厂、沈阳电缆厂
Focal point unit: National Wire and Cable Standardization Technical Committee
Publishing department: National Machinery Industry Commission
competent authority: China Electrical Equipment Industry Association
Introduction to standards:
This standard applies to PVC insulated and PVC sheathed control cables used in control, monitoring circuits and protection circuits with AC rated voltages of 450/750 V and below. GB 9330.2-1988 Plastic insulated control cable PVC insulated and sheathed control cable GB9330.2-1988 Standard download and decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China Plastic insulated control cables Polyvinyl chloride insulated and sheathed control cables Plastic insulated control cablesPolyvinyl chloride insulated and sheathed control cablesGB9330.2-88||tt ||This standard refers to the international standard IEC227 "Polyvinyl chloride insulated cables for 450/750V and below". 1 Scope of application 1.1 This standard applies to PVC insulated and PVC sheathed control cables used in control, monitoring circuits and protection lines with AC rated voltage 450/750V and below. 1.2 In addition to In addition to the requirements of this standard, it should also comply with the corresponding requirements of GB9330.1 "General Provisions for Plastic Insulated Control Cables". 2 Usage characteristics 2.1 Rated voltage U. /U is 450/750V 2.2 The long-term allowable operating temperature of the cable conductor is 70°C. 2.3 The installation temperature of the cable should not be lower than 0℃. Recommended allowable bending radius: For cables without armor, it should be no less than 6 times the outer diameter of the cable; for cables with armor or copper tape shielding structure, it should be no less than 12 times the outer diameter of the cable; The flexible cable with shielding layer structure should be no less than 6 times the outer diameter of the cable. 3 model cable model is specified in Table 1. Table 1 Type No. KV KVVP KVVP Name Title| |tt||Copper core PVC insulated PVC sheathed control cable Copper core PVC insulated PVC sheathed braided shielded control cable Copper core PVC insulated PVC sheathed copper tape Shielded control cable The main scope of use approved by the National Machinery Industry Commission on May 23, 1988 The number is laid indoors, in cable trenches, and pipelines for fixed installations that require shielding. Occasions Layed in indoor, cable trenches, pipelines and other fixed occasions requiring shielding Implemented on 1989-01-01 4 Type No.| |tt||KVV2 KVVs2 KVVR KVVRP Specifications Name Name GB9330.2- 88 Continued Table 1 Copper core PVC insulated PVC sheathed steel tape armored control cable Copper core PVC insulated PVC sheathed fine steel wire armor Installation control cable Copper core PVC insulated PVC sheathed control flexible cable Copper core PVC insulated polyethylene sheathed braided shielded control flexible cable Cable specifications are as specified in Table 2. | |tt | , cable trenches, pipes, shafts and other fixed occasions that can withstand large mechanical tension Laying in indoor movement requires softness, etc. Laying in indoor movement requires softness, shielding, etc. Nominal cross-section of the conductor, mm||tt| |Type No. KVV KVVP KVVP2 KVV.2 KVVs2 KVVR||tt| |KVVRP Rated voltage V 450/750 0.5 0.75 1.0 2~61| |tt||4~61 7~61 19~61 4~61 4~61 1.5 core 2.5 number 4~61 7~61 4~48 2~14 4~14 4~14 4~14 Note: The recommended core number series are: 2, 3, 4, 5, 7, 8, 10, 12, 14 , 16, 19, 24, 27, 30, 37, 44, 48, 52 and 61 cores. 5 Structure The cable structure and dimensions should comply with the requirements in Table 3 and Table 9. Table 3 KVV type 450/750V copper core PVC insulated PVC sheathed control cable core number × nominal cross-section mm 2×0.75 2×0.75||tt ||2×1.0 2×1.0 Conductor type 1 2 1 2 Insulation Nominal thickness Nominal thickness of sheath mm 0.6 0.6 0.6 0.6 mm| |tt||1.2 1.2 1.2 1.2 Large Average outer diameter, mm limit Upper 6.4 6.6 6.8 6.8 limit 8.0 8.4 8.4| |tt||8.8 6 10 2~10 4~10 4~10 4~10| |tt||70℃ Minimum insulation resistance Ma·km 0.012 0.014 0.011 0.013||tt| |Number of cores×nominal cross-section mm2 2×1.5 2×1.5 2×2.5 2×2.5 2×4 2×4 2×6 2×6 2×10 3×0.75 3× 0.75 3×1.0 3×1.0 3×1.5 3×1.5 3×2.5 3×2.5| |tt||3×4 3×4 3×6 3×6 3×10 4×0.75||tt ||4×0.75 :4×1.0 4×1.0 4×1.5 4×1.5 4×2.5||tt| |4×2.5 4×4 4×4 4×6 Conductor type 1 2||tt ||1 2 1 2 1 2 2 1 2 1 2 1 2 1 2 1 2| |tt||1 2 2 1 2 1 2 1||tt ||2 1 2 1 2 1 GB9330.2-88 continued table 3 Insulation nominal thickness mm 0.7 0.7 0.8 0.8 0.8||tt| |0.8 0.8 0.8 1:0 0.6 0.6 0. 6 0.6|| tt||0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8||tt| |1.0 0.6 0. 6 0.6 0.6 0.7 0.7 0.8||tt| |0.8 0.8 0.8 0.8.| ||1.2 1.3 1.2 1.5 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.5 1.5 1.5| |tt||1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2||tt ||1.5 1.5 1.5 下 名店外很,mm 限 7.6 7.8| |tt||8.6 9.0 3.0 1C.G 10. 5 11.0 14.0 6.8 7.0 7.0 7.2 8.0 8.2| |tt||9.2 9.4. 10.0 10.5 11.5 12.0 14.5 7.2|| tt||7.4 7.6 7.8 8.6 9.0 10.0 10.0 11.5||tt| |12.0 12.5 上 限 9.4 10.0 10.5 11.5 11.5 12.5 12.5 14.0 17.5 8.4 8.8 8.8 9.2|| tt||9.8 10.5 11.0 12.0 12.5 13.5 14.0 15.0||tt| |18.5 9.0 9.6 9.4 10.0 10.5 11.5 12.0 13.0 14.0 15.0 15.0 70℃ minimum insulation resistance Ma·km 0.011||tt ||0.010 0.010 0.009 0.008 5 0.0077 0.007.0 0.0065 0.0065|| tt||0.012 0.014 0.011 0.013 0. 011 0.010 0.010 0.009 0.0085 · 0. 007 7 0.007 0 0.0065|| tt||0.0065 0.012 0.014 0. 011 0.013 0. 011 0.010 0.010 0.009 0.0085 0. 0077 0.0070 芯数×確称意发 mm2 4×6 4x10 5×0.75||tt| |5×0.75 5×1.0 5×1.0 5×1.5 5×1.5 5×2.5 5 ×2.5 5×4 5×4 5×6 5×6 5×10 7×0.75 7×0.75 7×1.0 7×1.0 7×1.5 7×1.5 7×2.5|| tt||7×2.5 7×4 7×4 7×6 7×6 7×10||tt| |8×0.75 8×0.75 8×1.0 8×1.0 8×1.5 简体这些 2| |tt||2 1 2 1 2 1 2 1||tt ||2 1 2 1 2 2 1 2 1 2 1 2 1 2 1 2 1| |tt||2 2 1 2 1 2 1 GB9330.2- - 88 |tt||0.6 0.6 0.7 0.7 0.8 0.8 0.8 0.8||tt ||0.8 0.8 1.0 0.6 0.6 0. 6 0.6 0.7 0.7 0.8 0.8 0.8 0.8 0.8| |tt||0.8 1.0 0.6 0.6 0.6 0.6 0.7 护套性称?????? mm 1.5 1.5 1.2 1.2 1.2 1.2 1.2| |tt||1.2 1.5 1.5 1.5 1.5 1.5 1.5 1.7||tt ||1.2 1.2 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 1.5 1.7 1.2 1.2 1.2 1.2| |tt||1.5 下 合合外很,mm 限 13.0 16.0 7.8 8.0 8.2 8.4 9.4 9.8 11.5 11.5 12.5 13.0| |tt||14.0 14.5 18.0 8.4 8.8 9.0 9.2 10.0||tt ||10.5 12.5 12.5 13.5 14.0 15.0 15.5 20.0 9.4 9.6 10.0 10.0 12.0 上 限 16.5 20.0 9.6| |tt||10.5 10.0 11.0 11.5 12.5 14.0 14.5 15.0||tt ||16.5 16.5 18.0 22.5 10.5 11.0 11.0 11.5 12.5 13.5 15.0 16.0 16.5 17.5 18.0 19.5 24.0| |tt||11.5 12.0 12.0 13.0 14.5 70℃ minimum insulation resistance Ma ·km 0.0065 0.0065 0.012 0.014 0.011 0.013 0. 011 0.010 0.010 0.009 0.0085 0.0077 0.0070 0.0065 0.0065| |tt||0.012 0.014 0. 011 0.013 0.011 0.010 0.010 0.009 0.0085 0.0077 0.007 0 0.0065 0.0065 6.012 0.014 0.011 0.013 0.011 芯数×確称意发 mm2 8×1.5 8×2.5 8×2.5 8×4 8×4| |tt||8×6 8×6 8×10 10×0.75 10×0.75 10×1.0||tt ||10×1.0 10×1.5 10×1.5 10×2.5 10×2.5 10×4 10×4 10×6 10×6 10×10 12×0.75 12×0.75www.bzxz.net 12× 1.0 12×1.0 12×1.5 12×1.5 12×2.5 12×2.5 12×4| |tt||12×4 12×6 12×6 密体这些 2 1 2|| tt||1 2 1 2 2 1 2 1||tt| |2 1 2 1 2 1 2 1 2 2 1 2 1 2 1 2 1|| tt||2 1 2 1 2 GB9330.2--88 结表3||tt ||电影梦称科定 mm 0.7 0.8 0.8 0.8 0.8 0.8|| tt||0.8 1.0 0. 6 0.6 0. 6 0.6 0.7 0.7 0.8 0.8 0.8 0.8 0.8| |tt||0.8 1.0 0.6 0.6 0.6 0.6 0.7 0.7||tt ||0.8 0.8 0.8 0.8 0.8 0.8 护套性称安全 mm| |tt||1.5 1.5 1.5 1.5 1.5 1.7 1.7 1.7||tt ||1.2 1.2 1.5 1.5 1.5 1.5 1.5 1.5 1.7 1.7 1.7 1.7 1.7 1.5 1.5 1.5 1.5| |tt||1.5 1.5 1.5 1.5 1.7 1.7 1.7 1.7||tt ||下 合合外很,mm 限 12.5 14.0 14.0 15.5 16.0| |tt||17.5 18.0 22.5 10.5 10.5 11.5 12.0 13.5||tt ||14.0 15.5 16.0 18.0 18.5 19.5. 20.5 25.5||tt| |11.5 11.5 12.0 12.5 14.0 14.0 16.0 16.5 18.5 19.0 20.5 21.0 上 限 15.5 16.5 17.5|| tt||18.0 19.5 20.0 22.0 27.0 12.5 13.5 14.0||tt| |15.0 16.0 17.0 18.5 19.5 20.5 22.5 22.5 25.0 30.5 13.5 14.5 14.5 15.5 16.5 17.5 19.0|| tt||20.5 21.5 23.0 23.5 26.0 70℃ minimum insulation resistance Ma· km 0.010 0.010 0.009 0.0085 0.0077 0.007 0 0.0065 0.0065 0.012 0.014 0.011 0.013 0. 011 0.010 0.010 0.009 0.0085 0.0077 0.0070 0.0065 0.0065 0.012 0. 014 0. 011 0.013 0.011 0.010 0.010 0.009 0.0085 0.0077 0.0070| |tt||0.0065 芯数×性称分用 mm2 14×0.75 14×0.75 14×1.0||tt| |14×1.0 14×1.5 14×1.5 14×2.5 14×2.5 14×4 14 ×4 14×6 14×6 16×0.75 16×0.75 16×1.0 16×1.0 16×1.5 16×1.5 16×2.5 16×2.5 19×0.75 19×0.75|| tt||19×1.0 19×1.0 19×1.5 19×1.5 19×2.5 19×2.5||tt| |24×0.75 24×0.75 24×1.0 24×1.0 24×1.5 电视体设计 1| |tt||2 1 2 1 2 1 2 1||tt ||2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2| |tt||1 2 1 2 1 2 1 GB9330.2— 88. tt||0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8||tt| |0.6 0.6 0. 6 0.6 0.7 0.7 0.8 0.8 0.6 0.6 0. 6 0.6 0. 7 0.7 0.8 0.8 0.6 0.6 0.6 0.6 0.7| |tt||护套性称手机 mm 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.7 1.7 1.7 1.7 1.5 1.5| |tt||1.5 1.5 1.5 1.5 1.7 1.7 1.5 1.5||tt ||1.5 1.5 1.5 1.5 1.7 1.7 1.5 1.5 1.5 1.5 1.7 下 合合外很,mm 上 12.0 12.0||tt ||12.5 13.0 14.5 15.0 17.0 17.5 19.5 20.0 21.5 22.5 12.5 13.0 13.0 13.5 15.0 15.5 18.0| |tt||19.0 13.0 13.5 14.0 14.5 16.0 16.5 19.0||tt ||20.0 15.0 15.5 16.0 16.5 19.0 14.5 15.0 15.0 16.0 17.0 18.5 19.5 21.5 22.5 24.5 24.5| |tt||27.0 15.0 16.0 15.5 17.0 18.0 19.5 21.0||tt ||23.0 15.5 16.5 16.5 17.5 19.0 20.5 22.0 24.0 18.0 19.0 19.0 20.5 22.0 70℃ minimum insulation resistance||tt| |Ma·km 0.012 0.014 0.011 0.013 0.011 0.010 0.010||tt| |0.009 0.0085 0.0077 0.0070 0.0065 0.012 0.014 0.011 0.013 0.011 0.010 0.010 0. 009 0.012 0.014 0.011 0.013 0. 011 0.010 0.010 0.009 0.012 0.014 0.011 0.013 0.011| |tt||芯数×确称意发 mm 24×1.5 24×2.5 24×2.5 27×0.75|| tt||27×0.75 27×1.0 27×1.0 27×1.5 27×1.5 27×2.5||tt| |27×2.5 30×0.75 30×0.75 30×1.0 30×1.0 30×1.5 30 ×1.5 30×2.5 30×2.5 37×0.75 37×0.75 37×1.0 37×1.0 37×1.5 37×1.5 37×2.5 37×2.5 44×0.75 44×0.75|| tt||44×1.0 44×1.0 44×1.5 44×1.5 tat tt||2 1 2 2 1 2 1 2 1 2 1|| tt||2 1 2 1 2 1 2 1||tt| |2 1 2 2 1 2 1 2 1 2 1 2 GB9330.2-88 绝表3 电视校称安全 mm 0.7 0.8 0.8 0.6 0.6 0.6 0.6 0.7| |tt||0.7 0.8 0.8 0.6 0.6 0.6 0.6 0.7||tt ||0.7 0.8 0.8 0.6 0.6 0. 6 0.6 0.7 0.7 0.8 0.8 0. 6 0.6 0.6 0. 6||tt|>0.7 0.7 ||1.5 1.5 1.5 1.5 1.7 1.7 1.7 1.7 1.5 1.5 1.7 1.7 1.7 1.7 1.7 1.7 1.7| |tt||1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7||tt ||1.7 1.7 1. 7 1.7 1.7 下 名店外很,mm 限 20.0 22.5||tt ||23.0 15.5 16.0 16.5 17.0 19.5 20.0 23.0 23.5 16.0 16.5 17.5 18.0 20.0 21.0 24.0 24.5| |tt||17.5 18.0 18.5 19.5 21.5 22.5 25.5 26.5||tt ||19.5 20.5 21.0 21.5 24.5 25.5 上 限 24.0 25.5 28.0 18.0 19.5 19.0 20.5 22.5 24.5| |tt||26.0 28.5 19.0 20.0 20.5 22.0 23.0 25.0||tt ||27.0 29.5 20.5 22.0 21.5 23.5 25.0 27.0 29.0 31.5 23.0 24.5 24.0 26.0 28.0 30.5 70℃ minimum insulation resistance Ma·km 0.010 0.010 0.009 0.012 0.014||tt| |0.011 0.013 0. 011 0.010 0.010 0.009 0. 012 0.014 0. 011 0.013 0.011 0.010 0.010 0.009 0.012 0.014 0.011| |tt||0.013 0.011 0.010 0.010 0.009 0.012 0. 014 0. 011 0.013 0.011 0.010 芯数×梦称意发 mm2 44×2.5 44 ×2.5 48×0.75 48×0.75 52×1.0 52×1.0 52×1.5 52×1.5 52×2.5 52×2.5 61×0.75 61×0.75 61×1.0 61×1.0|| tt||61×1.5 61×1.5 61×2.5 61×2.5 表4 芯数×碌称意发|| tt||mm2 2×0.75 2×1.0 2×1.5 2×2.5 2×4 2 ×6 2×10 3×0.75 3×1.0 3×1.5 3×2.5 简体设计| |tt||1 2 1 2 1 2 1 2||tt ||1 2 1 2 1 2 1 2 1 2 GB9330.2—88 结表3 电影校称安全 mm 0.8||tt| |0.8 0.6 0.6 0.6 0.6 0.7 0.7 0.8 0.8 0. 6 0.6 0. 6 0. 6 0. 7. 0 1.7 1.7 1.7 1.7 1.7 1.7 2.0 2.0| |tt||1.7 1.7 1.7 1.7 2.0 2.0 2.2 2.2||tt ||下 合合外很,mm 限 29.5 30.5 20.0 20.5 22.0 22.5 25.5 26.5 31.0 32.0| |tt||22.0 22.5 23.0 24.0 27.5 28.5 33.0 34.0||tt ||上 限 33.5 36.0 23.0 25.5 25.0 27.0 29.0 31.5 35.0 38.0 25.0 27.0 26.5 28.5 31.5| |tt||34.0 37.5 40.5 70℃ minimum insulation resistance MQ·km 0.010||tt| |0.009 0.012 0.014 0.011 0.013 0.011 0.010 0.010 0 . 009 0.012 0.014 0.011 0.013 0.011 0.010 0.010 0.009| |tt||KVV型450/75V铝芯聚氯费设计聚氯质把套编经结果电影通设设计 確称安全 管体设计 mm||tt| |2 2 2 2 2 2 2 2 2 2 2 0.6 0.6 0.7 0.8 0.8 0.8|| tt||1.0 0.6 0.6 0.7 0.8 道单单线 確称进得 mm| |tt||0.15 0.15 0.15 0.15 0.20 0. 20 0.20 0.15 0.15 0.15 0.15 护套 性称安全||tt| |mm||ht||1.2||ht||1.2||ht||1.2||ht||1.2||ht||1.5||ht||1.5||ht||1.5||ht||1.2 1.2 1.2 1.2 名店外很,mm 下限 7.8 8.2||tt| |9.2 10.0 11.5 13.0 15.5 8.2 8.6 9.6 10.5 upper limit 9.8 10.5 11.5 12.5 14.5 16.0 19.0|| tt||10.5 10.5 12.0 13.5 70℃ minimum insulative resistance M·km 0.014 0.013 0.010 0.009 0. 007 0.0065 0.0065 0.014 0.013 0.010 0.009 芯数×確称意发|| tt||mm2 3×4 3×6 3×10 4×0.75 4×1.0 4 ×1.5 4×2.5 4×4 4×6 4×10 5×0.75 5×1.0 5×1.5 5×2.5 5×4 5×6 5×10 7×0.75|| tt||7×1.0 7×1.5 7×2.5 7×4 7×6 7×10||tt| |8×0.75 8×1.0 8x1.5 8×2.5 8x4 8×6 8×10 10×0.75 10×1.0 密体这些 2 2 2 2||tt ||2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2| |tt||2 2 2 2 2 2 2 2||tt ||2 2 2 2 电影 梦称安全 mm 0.8||tt ||0.8 1.0 0.6 0.6 0.7 0.8 0.8 0.8 1.0 0.6 0.6 0.7 0.8 0.8 0.8 1.0 0.6| |tt||0.6 0.7 0.8 0.8 0.8 1.0 0.6 0.6||tt ||0.7 0.8 0.8 0.8 1.0 0.6 0.6 GB9330.2-88| |tt||绝表4 道单单线 福称运动 mm 0.20 0. 20 0. 20||h||0.15||h||0.15||h||0.15||h||0. 20 0. 20 0. 20 0. 20 0.15 0.15 0.15 0.20 0. 20||h||0.20||h||0. 20 0.15 0.15 0.15 0.20 0.20 0. 20 0.20 0.15 0.15 0. 20 0.20 0.20 0.20 0. 25. |1.5 1.2 1.2 1.2 1.5 1.5 1.5 1.7 1.2 1.2 1.2 1.5 1.5 1.5 1.7 1.2 1.2 1.5 1.5 1.5 1.5 1.7 1.2| |tt||1.5 1.5 1.5 1.7 1.7 1.7 1.5 1.5||tt ||名合外很,mm||hh||下限||hh||12.5||hh||13.5||hh||16.5||hh||8.8||hh||9.2||hh||10.0| |tt||12.5 13.5 15.0 18.0 9.4 9.8 11.0 13.5||tt ||14.5 16.0 19.5 10.0 10.5 12.5 14.5 15.5 17.5 21.5 11.0 12.0 14.0 16.0 18.0 19.5 24.0| |tt||13.0 13.5 upper limit 15.5 17. 0||h||20.0||h||11. 0 11.5 12.5 15.0 16.5 18.0 22.0 11.5 12.0| |tt||13.5 16.5 18.0 19.5 24.0 12.5 13.0 15.0||tt ||17.5 19.0 21.0 26.0 13.5 15.0 17.0 19.0 21.5 24.0 29.0 16.0 16.5 70℃ minimum insulation resistance Ma·km|| tt||0.0077 0.0065 0.0065 0.014 0.013 0.010 0.009 0.0077||tt| |0.0065 0.0065 0.014 0.013 0.010 0.009 0.0077 0.0065 0.0065 0.014 0.013 0.010 0.009 0.0077 0.0065 0.0065 0.014|| tt||0.013 0.010 0.009 0. 0077 0.0065 0.0065 0.014 0.013 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.