GB/T 2885.2-1981 Basic parameters and dimensions of metal mine tilting box cars
Basic Information
Standard ID:
GB/T 2885.2-1981
Standard Name: Basic parameters and dimensions of metal mine tilting box cars
Chinese Name:
金属矿翻转车箱式矿车 基本参数及尺寸
Standard category:National Standard (GB)
state:Abolished
Date of Release1981-01-02
Date of Implementation:1982-07-01
Date of Expiration:2009-02-01
standard classification number
Standard ICS number:Mining and Mineral Products >> 73.100 Mining Equipment
Standard Classification Number:Railway>>Railway Vehicles>>S56 Narrow Gauge Industrial and Mining Railway Vehicles
Publication information
publishing house:China Standards Press
Publication date:1982-07-01
other information
Release date:1981-12-31
Review date:2004-10-14
Drafting unit:Beijing Nonferrous Metallurgy Design and Research Institute
Focal point unit:National Technical Committee for Standardization of Mining Machinery
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 2885.2-1981 Basic parameters and dimensions of metal mine tilting box-type mining cars GB/T2885.2-1981 standard download decompression password: www.bzxz.net
Some standard content:
The National Standard of the People's Republic of China
Metal Ore Tilting Car Box Ore Car
Basic Parameters and Dimensions
This standard applies to underground mining metal mines (or other mines with similar ore properties and mining methods) and transports ore, waste rock or other materials along underground tunnels to surface industrial sites. 1. The basic parameters and dimensions of metal ore tilting car box ore car should comply with the provisions of the table. Note, this figure only shows the size symbol.
National Standard
Issued by the General Administration of Nonferrous Metals Industry
Proposed by the State Administration of Nonferrous Metals Industry July 1, 1982 Implementation
Drafted by Beijing Nonferrous Metallurgical Design and Research Institute
Cutting Weight
GB 2886.2-81
Note: (t) Height H and height h are measured from the white rail surface (when unloaded). (2) The load capacity is calculated based on the loose specific gravity of the material = 2.5 t/m. Height
Rate of traction
-TKANiKAca
Total 3 pages Page 2
Spider load angle
Traction forcewwW.bzxz.Net
(not small
《not large
Total 3 pages Page 3
GB2685.2-81
The model of the metal mine turntable box mine car is stipulated as: Marking example side:
Volume 0.7m, gauge 600mm metal mine tipping car box mine car, YFC0.7 -6 mine car GB 2885.2—81-Gauge code: 6 means 600mm
7 means 762mm
Volume code (m?)
Mine car code
Tidal turntable box code
Metal mine code
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.