JB/T 3773.1-1999 This standard is a revision of JB 3773.1-84 "Basic Parameters of Pallet Trucks". During the revision, only editorial changes were made according to relevant regulations, and the main technical content remained unchanged. This standard applies to low-lift pallet trucks powered by batteries and motors. This standard was first issued on October 12, 1984. JB/T 3773.1-1999 Basic Parameters of Pallet Trucks JB/T3773.1-1999 Standard download decompression password: www.bzxz.net
Some standard content:
ICS53.060 Machinery Industry Standard of the People's Republic of China JB/T3773.1-1999 Pallet trucksWww.bzxZ.net Basic parameters Pallet trucksBasic parameters Published on 1999-06-28 National Bureau of Machinery Industry Implemented on 2000-01-01 JB/T3773.1-1999 This standard is a revision of JB3773.1-84 "Basic parameters of pallet trucks". During the revision, the original standard was edited and the main technical content remained unchanged. This standard replaces JB3773.1-84 from the date of implementation. This standard is proposed and managed by Beijing Hoisting and Conveying Machinery Research Institute. Drafting unit of this standard: Beijing Hoisting and Conveying Machinery Research Institute. The main drafters of this standard are Su Enyi and Zhang Jingxiang. 1 Machinery Industry Standard of the People's Republic of China Basic parameters Pallet trucks Pallet trucksBasic parametersJB/T3773.1-1999 Replaces JB3773.1-84 This standard applies to pallet trucks with low lifting height powered by batteries and motors (hereinafter referred to as pallet trucks). 2 Model Marking example: The improvement code is represented by A, B, C in sequence Operation mode code: B for walking, Z for standing, and no code for seated type. t Electric pallet truck code The rated lifting capacity of the first improvement is 2t, and the pedestrian-operated pallet truck is marked as: Pallet truck CBD2BAJB/T3773—19993 Basic parameters and dimensions The basic parameters and dimensions of pallet trucks shall comply with the provisions of Figures 1, 2 and Table 1. Approved by the State Bureau of Machinery Industry on June 28, 1999, and implemented on January 1, 2000 JB/T 3773.1—1999 Manipulation mode Rated lifting capacity Maximum lifting capacity of forks Minimum height of forks Fork length L Full width of forks Lifting capacity of forks per press of the hand oil pump Time for maximum lifting capacity Maximum driving speed without load Maximum driving speed with full load Minimum outer turning radius Rated battery voltage mm/time JB/T 3773.1—1999 ≤1400 1The dimensions in brackets are only for old products. 1.5 ≤1500 2 Fork length 1200mm corresponds to the minimum outer turning radius in the table. 2 530(520)690 24,48 3 Fork length should preferably adopt the values in the table, According to needs, it can also be selected from the following values: 800. 1000, ≤1700 1600mm Mechanical Industry Standard Basic Parameters of Pallet Truck JB/T3773.11999 Published by the Mechanical Science Research Institute Mechanical Science Research Institute Printed by the Institute (No. 2 Shouti South Road, Beijing, Postal Code 100044)* Format 880×1230 K Number of words xxX,xxx Sheet X/X Printed in XX month, 19XX Edition X in XX month, 19XX Number of prints 1-XXX Price XXXXX Yuan XX-XXX Mechanical Industry Standard Service Network: http/AvwwJB.ac.cn666 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.