JB/T 3665.1-1999 This standard is a revision of ZB J53 009-89 "Vertical Lathe Parameters". During the revision, only editorial changes were made according to relevant regulations. This standard is part of the "Single-column and Double-column Vertical Lathe" series of standards, which includes the following three parts: JB/T 3665.1-1999 Single-column and Double-column Vertical Lathe Parameters JB/T 4116-1996 Single-column and Double-column Vertical Lathe Accuracy Inspection JB/T 3665-1996 Single-column and Double-column Vertical Lathe Technical Conditions This standard specifies the parameters of single-column and double-column vertical lathes. This standard applies to newly designed single-column and double-column vertical lathes. This standard was first issued in June 1976 and revised for the first time in 1989. JB/T 3665.1-1999 Single-column and double-column vertical lathe parameters JB/T3665.1-1999 standard download decompression password: www.bzxz.net

ICS25.080.10
Machinery Industry Standard of the People's Republic of China
JB/T3665.1-1999
Single-column and double-column vertical lathes
Published on 1999-05-20
National Bureau of Machinery Industry
Implemented on 2000-01-01
JB/T3665.1-1999
This standard is a revision of ZBJ5300989 "Vertical Lathe Parameters". During the revision, only editorial changes were made according to relevant regulations. The technical content was not changed. This standard is part of the "Single-column and Double-column Vertical Lathe" series of standards, which includes the following three parts: JB/T3665.1—1999
JB/T4116—-1996
JB/T3665—1996
Parameters of Single-column and Double-column Vertical Lathes
Precision Inspection
Single-column and Double-column Vertical Lathes
Technical Conditions
This standard replaces ZBJ5300989 from the date of implementation. This standard is proposed by the National Technical Committee for Metal Cutting Machine Tools Standardization. This standard is under the jurisdiction of the Heavy Machine Tool Branch of the National Technical Committee for Metal Cutting Machine Tools Standardization. The responsible drafting unit of this standard is Wuhan Heavy Machine Tool Research Institute. The drafting units of this standard include: Qiqihar No. 1 Machine Tool Factory, Xinxiang Machine Tool Factory, and Wafangdian Machine Tool Factory. This standard was first issued in June 1976 and revised for the first time in 1989. 1
1 Scope
Machinery Industry Standard of the People's Republic of China
Parameters of single-column and double-column vertical lathes
This standard specifies the parameters of single-column vertical lathes and double-column vertical lathes. This standard applies to newly designed single-column vertical lathes and double-column vertical lathes. 2 Parameters
2.1 The type of single-column vertical lathe is shown in Figure 1, and the parameters shall comply with the provisions of Table 1. Figure 1 Single-column vertical lathe
Maximum turning diameter D
Maximum processing height H
Maximum workpiece weight
2.2 The type of double-column vertical lathe is shown in Figure 2, and the parameters shall comply with the provisions of Table 2. Approved by the State Machinery Industry Bureau on May 20, 1999, 2000
JB/T3665.1-1999
Replaced ZBJ5300989
Implementation on January 1, 2000
Maximum turning diameter D
Maximum workpiece height H
Maximum workpiece weight
JB/T 3665.1—1999
Double-column vertical lathe
The type of the single-column movable vertical lathe is shown in Figure 3, and the parameters should comply with the requirements of Table 3. D
Figure 3 Single-column movable vertical lathe
Maximum turning diameter D
To center turning diameter D
Maximum workpiece height H
Maximum workpiece weight
JB/T3665.1—1999
2.4 The type of the single-column vertical lathe with movable table is shown in Figure 4, and the parameters shall comply with the provisions of Table 4. Figure 4 Single-column vertical lathe with movable table
Maximum turning diameter D
To center turning diameter D
Maximum workpiece height H
Maximum workpiece weight
The type of the fixed-beam single-column vertical lathe is shown in Figure 5, and the parameters shall comply with the provisions of Table 5. 2.5
Figure 5 Fixed beam single column vertical lathe
Maximum turning diameter D
Maximum workpiece height H
Maximum workpiece weight
JB/T 3665.1-1999
Mechanical Industry Standard
Single-column and double-column vertical lathesbZxz.net
JB/T3665.1-1999
Published and distributed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing Sheet 1/2 Number of Words 8000
Format 880×1230
First Printing in July 1999
First Edition in July 1999
Print Quantity 1-500
Price 500 Yuan
99-199
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.