SB/T 10834-2012 Specification for the Construction of Waste Tire Recycling System SB/T10834-2012 Standard compression package decompression password: www.bzxz.net
This standard specifies the establishment principles and construction requirements of the waste tire recycling system. This standard is applicable to the construction of the waste tire recycling system.
This standard was drafted in accordance with the rules given in GB/T1.1-2009.
This standard is proposed and managed by the Ministry of Commerce of the People's Republic of China.
The responsible drafting unit of this standard: China Tire Retreading and Recycling Association.
Participating drafting units of this standard: China Tire Retreading and Recycling Association, Soft Control Co., Ltd., Henan Xinaika Rubber Industry Co., Ltd., Shanxi Pingyao Juxian Rubber Co., Ltd., Shandong Zhongcheng Rubber Co., Ltd., Pinglu Kangle Rubber and Plastic Technology Development Co., Ltd., Tangshan Xingyu Rubber and Plastic Industry Co., Ltd.
The main drafters of this standard are: Zhu Jun, Wang Fei, Cheng Yuan, Yi Zewen, Wang Hongli, Pang Shuhua, Song Ting, Zhao Chuanjun, Hu Kangfu, Gao Shixing, Shi Lijun.
The following documents are indispensable for the application of this document. For all dated referenced documents, only the dated version applies to this document. For all undated referenced documents, the latest version (including all amendments) applies to this document.
GB2894 Safety Signs
GB/T26731—2011 Processing of Waste Tires
GB50016 Code for Fire Protection Design of Buildings
"Measures for the Administration of Recycling of Renewable Resources" (Ministry of Commerce Order [2007] No. 8)
Preface I
1 Scope1
2 Normative References1
3 Terms and Definitions1
4 Establishment Principles2
5 Construction Requirements2
References3

ICS 03.100.20
Registration number: 38494—2012
National Trade Industry Standard of the People's Republic of China SB/T10834—2012
Construction specifications of waste tyre recycling system2012-12-20 Issued
Ministry of Commerce of the People's Republic of China
2013-06-01 Implementation
SB/T10834—2012
Normative references
3 Terms and definitions
4 Establishment principles
5 Construction requirements
References
This standard was drafted in accordance with the rules given in GB/T1.1-2009. This standard was proposed and managed by the Ministry of Commerce of the People's Republic of China. The responsible drafting unit of this standard: China Tire Retreading and Recycling Association. SB/T10834—2012
Participating drafting organizations of this standard: China Tire Retreading and Recycling Association, Soft Control Co., Ltd., Henan New Aika Rubber Industry Co., Ltd., Shanxi Pingyao Juxian Rubber Co., Ltd., Shandong Zhongcheng Rubber Co., Ltd., Pinglu Kangle Rubber and Plastic Technology Development Co., Ltd., Tangshan Xingzi Rubber and Plastic Industry Co., Ltd.
Main drafters of this standard: Zhu Jun, Wang Fei, Cheng Yuan, Yi Zewen, Wang Hongli, Pang Hua, Song Ting, Zhao Chuanjun, Hu Kangfu, Gao Shixing, Shi Lijun.
1 Scope
Construction specification of waste tire recycling system
This standard specifies the establishment principles and construction requirements of waste tire recycling system. This standard applies to the construction of waste tire recycling system. 2 Normative references
SB/T108342012
The following documents are indispensable for the application of this document. For all referenced documents with dates, only the versions with dates apply to this document. For any undated referenced document, the latest version (including all amendments) shall apply to this document. GB2894 Safety Signs
GB/T26731-2011 Waste Tire Processing GB50016 Code for Fire Protection of Building Design
Management Measures for Recycling of Recycled Resources (No. 8, 2007, Ministry of Commerce) 3 Terms and Definitions
The following terms and definitions apply to this document. 3.1
Waste Tirewastetyre
Tires that have lost their original use value and cannot be refurbished for continued use. [GB/T26731—2011, Definition 3.1]
wastetyresources
Waste Tire Sources
Places where waste tires are generated include tire users and producers, automobile repair industry, tire sales outlets, automobile dismantling plants, etc. 3.3
Recycling sites
Recycling sites and networks for waste tires.
Distributed transaction marketA fixed place for collecting, sorting, decomposing, storing and trading waste tires according to the classification standards and crystal quality of waste tires. 3.5
Processing
Processing
A recycling method that uses physical or chemical methods to make various materials in waste tires regain their use value. 3.6
Recycling enterprises
Recycling enterprises
Enterprises responsible for waste tire recycling in their jurisdictions established with the approval of relevant departments. SB/T10834-—2012
4 Principles of establishment
4.1 The construction of the recycling system shall be in accordance with the "Regulations on the Management of Recycling of Renewable Resources" and comply with relevant national laws and regulations. The recycled tires shall be handed over to qualified waste tire processing enterprises. 4.2 The establishment of a recycling enterprise shall be approved by the local commerce department, reported to the national commerce department and the corresponding organization for approval, and registered with the industrial and commercial administration department to obtain a business license. 4.3 The establishment of recycling outlets shall be included in urban and rural planning. In accordance with the principle of "convenient recycling and environmental protection", modern circulation methods shall be adopted to transform and build unified and standardized recycling outlets.
5 Construction requirements
5.1 The architectural design of the recycling system
shall comply with the provisions of GB2894 and GB50016, and shall comply with the requirements of environmental protection, urban appearance and fire protection. The business area and operating area shall meet the needs of the scale.
5.2 The temporary storage site of the recycling station
shall comply with the requirements of the local environmental protection and fire protection departments, and shall be transported to the local distribution and trading market within a limited time. 5.3 Purchase and storage site
5.3.1 Waste tires in the distribution and trading market should be stored on impermeable ground with drainage and pollutant interception facilities. The relevant facilities should be kept safe, clean and complete, and there should be no excessive flying of discarded materials, overflow and leakage, odor, pollution of the ground and water, etc. 5.3.2 The waste tire storage site should be equipped with a fire safety system, including special fire pipes, fire hydrants, etc.: Lightning protection devices should also be installed, and the grounding facilities and performance should be guaranteed to be good + and should be inspected regularly. 5.3.3, fireworks should be strictly prohibited within 5m of this storage site, and no flammable materials should be stored, and signs prohibiting fireworks should be set up: separation corridors, passages should be kept unobstructed, and safe passages, fire safety equipment and electrical switches should not be blocked. 5.3.4 Fences should be set up around the storage site, and waste tires and their recycled materials and recycled waste should be divided and stacked according to their characteristics or quantities, and their types and names should be marked.
5.3.5 The height of the partitioned storage should not exceed 3m, the adjacent height difference should not exceed 1.5m, the width and length of the partitioned storage should not exceed 20m, and there should be a partitioned walkway of more than 1.5m between each area. Rope tying, netting and pile blocking, wall blocking or other blocking measures should be taken to prevent accidents such as scattering, falling, and falling. 5.3.6 Waste tire storage should have rain protection facilities and equipment or measures to prevent the breeding of mosquitoes, flies or other germs, and should be sprayed with alcohol and other mosquito repellents regularly or irregularly, and records should be kept for reference. 5.3.7 The storage volume of waste tires in the distribution and trading market should not exceed the average two-month waste tire recycling volume, 5.4 Storage volume
The storage volume of waste tires in the waste tire storage yard of the processing enterprise should not exceed the average three-month waste tire processing volume. 2
References
GB/T20861-2007 Terminology of Waste Product Recycling and Utilization GB/T26731-2011 Processing of Waste Tires GB/T27610-2011 Classification and Codes of Waste Products SB/T10719-2012 Management Specifications for the Construction of Recycling Sites for Renewable Resources [5]
SB/T10834-2012
Notice on Issuing the Guiding Opinions of the State Environmental Protection Administration on Promoting the Development of Circular Economy (Environmental Protection Administration [20057114]) [7]
Opinions of the General Office of the State Council on Establishing a Complete and Advanced Waste and Used Commodity Recycling System (Guobanfa [2011749]) [8]
Notice of the Ministry of Commerce and the Ministry of Finance on Accelerating the Construction of the Recycling System for Renewable Resources (Shangshangmaofa [20097142]) L9
Guiding Opinions of the Ministry of Commerce on Further Promoting the Development of the Renewable Resources Recycling Industry (Shangshangmaofa [2010] No. 187) SB/T10834- 2012
Print date: May 22, 2013 F009A Industry Standard
Specification for the Construction of Waste Tire Recycling System
SB/T10834—2012
Published and distributed by China Standards Press
No. 2, West Hepingli Street, Chaoyang District, Beijing (100013) No. 16, North Sanlihe Street, Xicheng District, Beijing (100045) Website: spe.net.cn
Editorial Office: (010) 64275323 Distribution Center: (010) 5178 0235 Reader Service Department: (010>68523946
Printed by China Standard Press, Thailand Royal Island Printing Factory Distributed by Xinhua Bookstores in various places
Format 880×12301/16 Printing sheet 0.5 Word count 7,000 words First edition in May 2013
First printing in May 2013
Book number: 155066·2-24960 Price 14.00 yuan If there is any printing error, the distribution center of our company will replace it. Copyright is exclusive and all rights will be investigatedWww.bzxZ.net
Report telephone: (010)68510107
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.